Hi Cedric, you shouldn't need to use the GCS. If you didn't configure a different mode explicitly, you should be able to arm/disarm the motors via yaw stick (at zero throttle). But you need to be in
Hello, I tried to start the motors without the GCS but without success so far. To make them start I need to push the resurrect button on the GCS and then switch the kill switch. I'd love not to use a
That autopilot switch was an act of pure desperation! ;-) Exactly to disable every possible security feature. I´m not sure about that killswitch. At least he doesn´t say I killed him. And
Dear Simon, thank you anyway for having a look at it. I have wired and configured the GPS now and it didn't change it, as expected. Next I'm going to wire the ESCs to the AP. Perhaps there is somebod
Thats a good idea. I've attached it. Its basicly Piotrs lisa_m_pwm, with my imu and ppm rc. On 03.01.2012 20:25, Simon Wilks wrote: Perhaps you should show us your config. Regarding the missing GPS
Thats a good idea. I've attached it. Its basicly Piotrs lisa_m_pwm, with my imu and ppm rc. On 03.01.2012 20:25, Simon Wilks wrote: Perhaps you should show us your config. Regarding the missing GPS
Thats a good idea. I've attached it. Its basicly Piotrs lisa_m_pwm, with my imu and ppm rc. On 03.01.2012 20:25, Simon Wilks wrote: Perhaps you should show us your config. Regarding the missing GPS
Thats a good idea. I've attached it. Its basicly Piotrs lisa_m_pwm, with my imu and ppm rc. On 03.01.2012 20:25, Simon Wilks wrote: Perhaps you should show us your config. Regarding the missing GPS f
Hi again, @Eduardo: Its a rotorcraft, with currently no escs installed. I'm going to connect pwm-chinacontrollers, but currently I'm watching the throttle-gauge. @Simon: It was specified and is 9.3V
Hi again, @Eduardo: Its a rotorcraft, with currently no escs installed. I'm going to connect pwm-chinacontrollers, but currently I'm watching the throttle-gauge. @Simon: It was specified and is 9.3V
What the type of your frame ? rotorcraft or fixed wing ? if is rotor, what kinf of esc you are using ? Date: Tue, 3 Jan 2012 19:55:14 +0100 From: address@hidden To: address@hidden Subject: Re: [Papa
What the type of your frame ? rotorcraft or fixed wing ? if is rotor, what kinf of esc you are using ? Date: Tue, 3 Jan 2012 19:55:14 +0100 From: address@hidden To: address@hidden Subject: Re: [Papar
Hi Eduardo, thank you for your reply. I have the following define for the kill-switch: <define name="RADIO_KILL_SWITCH" value="RADIO_CAM"/> The CAM switch is a two point switch on my radio. If I acti
How many channels have your radio ? Your KILL switch are ON. With spektrum radio the KILL are the channel number 5. Look ate radio config file and change the KILL channel if necessary. > Date: Tue, 3
Hi everyone and a happy new year! I'm currently trying to get a Lisa/m to run. Everything is fine so far, I managed to get it to run, also with my PPM-RC. But now I have a problem: I can't get the mo