[FYI] {maint} sync: some auxiliary files synced from upstream

[Stefano Lattarini]

* lib/texinfo.tex: Synced from upstream, by "make fetch".
* lib/config.guess: Likewise.
* lib/config.sub: Likewise.
* lib/gnupload: Likewise.

Signed-off-by: Stefano Lattarini <address@hidden>
---
 lib/config.guess |   16 +++-
 lib/config.sub   |   19 ++++--
 lib/gnupload     |    2 +-
 lib/texinfo.tex  |  198 +++++++++++++++++++++++++++++++++++------------------
 4 files changed, 157 insertions(+), 78 deletions(-)

diff --git a/lib/config.guess b/lib/config.guess
index 49ba16f..d622a44 100755
--- a/lib/config.guess
+++ b/lib/config.guess
@@ -4,7 +4,7 @@
 #   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
 #   2011, 2012 Free Software Foundation, Inc.
 
-timestamp='2012-01-01'
+timestamp='2012-02-10'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -17,9 +17,7 @@ timestamp='2012-01-01'
 # General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -863,6 +861,13 @@ EOF
     i*86:Minix:*:*)
        echo ${UNAME_MACHINE}-pc-minix
        exit ;;
+    aarch64:Linux:*:*)
+       echo ${UNAME_MACHINE}-unknown-linux-gnu
+       exit ;;
+    aarch64_be:Linux:*:*)
+       UNAME_MACHINE=aarch64_be
+       echo ${UNAME_MACHINE}-unknown-linux-gnu
+       exit ;;
     alpha:Linux:*:*)
        case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
          EV5)   UNAME_MACHINE=alphaev5 ;;
@@ -1320,6 +1325,9 @@ EOF
     i*86:AROS:*:*)
        echo ${UNAME_MACHINE}-pc-aros
        exit ;;
+    x86_64:VMkernel:*:*)
+       echo ${UNAME_MACHINE}-unknown-esx
+       exit ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2
diff --git a/lib/config.sub b/lib/config.sub
index d6b6b3c..c894da4 100755
--- a/lib/config.sub
+++ b/lib/config.sub
@@ -4,7 +4,7 @@
 #   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
 #   2011, 2012 Free Software Foundation, Inc.
 
-timestamp='2012-01-01'
+timestamp='2012-02-10'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -21,9 +21,7 @@ timestamp='2012-01-01'
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -132,6 +130,10 @@ case $maybe_os in
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
     ;;
+  android-linux)
+    os=-linux-android
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+    ;;
   *)
     basic_machine=`echo $1 | sed 's/-[^-]*$//'`
     if [ $basic_machine != $1 ]
@@ -247,6 +249,7 @@ case $basic_machine in
        # Some are omitted here because they have special meanings below.
        1750a | 580 \
        | a29k \
+       | aarch64 | aarch64_be \
        | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
        | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | 
alpha64pca5[67] \
        | am33_2.0 \
@@ -319,7 +322,7 @@ case $basic_machine in
        c6x)
                basic_machine=tic6x-unknown
                ;;
-       m6811 | m68hc11 | m6812 | m68hc12 | picochip)
+       m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
                basic_machine=$basic_machine-unknown
                os=-none
                ;;
@@ -332,7 +335,10 @@ case $basic_machine in
        strongarm | thumb | xscale)
                basic_machine=arm-unknown
                ;;
-
+       xgate)
+               basic_machine=$basic_machine-unknown
+               os=-none
+               ;;
        xscaleeb)
                basic_machine=armeb-unknown
                ;;
@@ -355,6 +361,7 @@ case $basic_machine in
        # Recognize the basic CPU types with company name.
        580-* \
        | a29k-* \
+       | aarch64-* | aarch64_be-* \
        | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
        | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
        | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
diff --git a/lib/gnupload b/lib/gnupload
index 51e17c6..b71ddfd 100755
--- a/lib/gnupload
+++ b/lib/gnupload
@@ -3,7 +3,7 @@
 
 scriptversion=2012-01-15.15; # UTC
 
-# Copyright (C) 2004-2010, 2012 Free Software Foundation, Inc.
+# Copyright (C) 2004-2012 Free Software Foundation, Inc.
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
diff --git a/lib/texinfo.tex b/lib/texinfo.tex
index 2abda0f..85b68e7 100644
--- a/lib/texinfo.tex
+++ b/lib/texinfo.tex
@@ -3,11 +3,11 @@
 % Load plain if necessary, i.e., if running under initex.
 \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
 %
-\def\texinfoversion{2012-01-03.09}
+\def\texinfoversion{2012-03-11.15}
 %
 % Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
 % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
-% 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+% 2007, 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
 %
 % This texinfo.tex file is free software: you can redistribute it and/or
 % modify it under the terms of the GNU General Public License as
@@ -887,7 +887,7 @@ where each line of input produces a line of output.}
 \def\popthisfilestack{\errthisfilestackempty}
 \def\errthisfilestackempty{\errmessage{Internal error:
   the stack of filenames is empty.}}
-
+%
 \def\thisfile{}
 
 % @center line
@@ -895,36 +895,46 @@ where each line of input produces a line of output.}
 %
 \parseargdef\center{%
   \ifhmode
-    \let\next\centerH
+    \let\centersub\centerH
   \else
-    \let\next\centerV
+    \let\centersub\centerV
   \fi
-  \next{\hfil \ignorespaces#1\unskip \hfil}%
+  \centersub{\hfil \ignorespaces#1\unskip \hfil}%
+  \let\centersub\relax % don't let the definition persist, just in case
 }
-\def\centerH#1{%
-  {%
-    \hfil\break
-    \advance\hsize by -\leftskip
-    \advance\hsize by -\rightskip
-    \line{#1}%
-    \break
-  }%
+\def\centerH#1{{%
+  \hfil\break
+  \advance\hsize by -\leftskip
+  \advance\hsize by -\rightskip
+  \line{#1}%
+  \break
+}}
+%
+\newcount\centerpenalty
+\def\centerV#1{%
+  % The idea here is the same as in \startdefun, \cartouche, etc.: if
+  % @center is the first thing after a section heading, we need to wipe
+  % out the negative parskip inserted by \sectionheading, but still
+  % prevent a page break here.
+  \centerpenalty = \lastpenalty
+  \ifnum\centerpenalty>10000 \vskip\parskip \fi
+  \ifnum\centerpenalty>9999 \penalty\centerpenalty \fi
+  \line{\kern\leftskip #1\kern\rightskip}%
 }
-\def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}}
 
 % @sp n   outputs n lines of vertical space
-
+%
 \parseargdef\sp{\vskip #1\baselineskip}
 
 % @comment ...line which is ignored...
 % @c is the same as @comment
 % @ignore ... @end ignore  is another way to write a comment
-
+%
 \def\comment{\begingroup \catcode`\^^M=\other%
 address@hidden \catcode`\{=\other \catcode`\}=\other%
 \commentxxx}
 {\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
-
+%
 \let\c=\comment
 
 % @paragraphindent NCHARS
@@ -1173,8 +1183,8 @@ output) for that.)}
   %
   % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto).
   \def\dopdfimage#1#2#3{%
-    \def\imagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}%
-    \def\imageheight{#3}\setbox2 = \hbox{\ignorespaces #3}%
+    \def\pdfimagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}%
+    \def\pdfimageheight{#3}\setbox2 = \hbox{\ignorespaces #3}%
     %
     % pdftex (and the PDF format) support .pdf, .png, .jpg (among
     % others).  Let's try in that order, PDF first since if
@@ -1212,8 +1222,8 @@ output) for that.)}
     \else
       \immediate\pdfximage
     \fi
-      \ifdim \wd0 >0pt width \imagewidth \fi
-      \ifdim \wd2 >0pt height \imageheight \fi
+      \ifdim \wd0 >0pt width \pdfimagewidth \fi
+      \ifdim \wd2 >0pt height \pdfimageheight \fi
       \ifnum\pdftexversion<13
          #1.\pdfimgext
        \else
@@ -1362,7 +1372,13 @@ output) for that.)}
       \fi
     \fi
     \nextsp}
-  \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax}
+  \def\getfilename#1{%
+    \filenamelength=0
+    % If we don't expand the argument now, \skipspaces will get
+    % snagged on things like "@value{foo}".
+    \edef\temp{#1}%
+    \expandafter\skipspaces\temp|\relax
+  }
   \ifnum\pdftexversion < 14
     \let \startlink \pdfannotlink
   \else
@@ -2842,8 +2858,8 @@ end
 % 
 \def\outfmtnametex{tex}
 %
-\def\inlinefmt#1{\doinlinefmt #1,\finish}
-\def\doinlinefmt#1,#2,\finish{%
+\long\def\inlinefmt#1{\doinlinefmt #1,\finish}
+\long\def\doinlinefmt#1,#2,\finish{%
   \def\inlinefmtname{#1}%
   \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi
 }
@@ -2855,8 +2871,8 @@ end
 % well use a command to get a left brace too.  We could re-use the
 % delimiter character idea from \verb, but it seems like overkill.
 % 
-\def\inlineraw{\tex \doinlineraw}
-\def\doinlineraw#1{\doinlinerawtwo #1,\finish}
+\long\def\inlineraw{\tex \doinlineraw}
+\long\def\doinlineraw#1{\doinlinerawtwo #1,\finish}
 \def\doinlinerawtwo#1,#2,\finish{%
   \def\inlinerawname{#1}%
   \ifx\inlinerawname\outfmtnametex \ignorespaces #2\fi
@@ -4732,10 +4748,9 @@ end
 %
 % ..., ready, GO:
 %
-\def\safewhatsit#1{%
-\ifhmode
+\def\safewhatsit#1{\ifhmode
   #1%
-\else
+ \else
   % \lastskip and \lastpenalty cannot both be nonzero simultaneously.
   \whatsitskip = \lastskip
   \edef\lastskipmacro{\the\lastskip}%
@@ -4759,7 +4774,6 @@ end
     % to re-insert the same penalty (values >10000 are used for various
     % signals); since we just inserted a non-discardable item, any
     % following glue (such as a \parskip) would be a breakpoint.  For example:
-    %
     %   @deffn deffn-whatever
     %   @vindex index-whatever
     %   Description.
@@ -4772,8 +4786,7 @@ end
     % (the whatsit from the \write), so we must insert a \nobreak.
     \nobreak\vskip\whatsitskip
   \fi
-\fi
-}
+\fi}
 
 % The index entry written in the file actually looks like
 %  \entry {sortstring}{page}{topic}
@@ -5876,14 +5889,15 @@ end
   %
   % We'll almost certainly start a paragraph next, so don't let that
   % glue accumulate.  (Not a breakpoint because it's preceded by a
-  % discardable item.)
+  % discardable item.)  However, when a paragraph is not started next
+  % (\startdefun, \cartouche, \center, etc.), this needs to be wiped out
+  % or the negative glue will cause weirdly wrong output, typically
+  % obscuring the section heading with something else.
   \vskip-\parskip
   %
-  % This is purely so the last item on the list is a known \penalty >
-  % 10000.  This is so \startdefun can avoid allowing breakpoints after
-  % section headings.  Otherwise, it would insert a valid breakpoint between:
-  %   @section sec-whatever
-  %   @deffn def-whatever
+  % This is so the last item on the main vertical list is a known
+  % \penalty > 10000, so \startdefun, etc., can recognize the situation
+  % and do the needful.
   \penalty 10001
 }
 
@@ -6303,7 +6317,7 @@ end
   % If this cartouche directly follows a sectioning command, we need the
   % \parskip glue (backspaced over by default) or the cartouche can
   % collide with the section heading.
-  \ifnum\lastpenalty>10000 \vskip\parskip \fi
+  \ifnum\lastpenalty>10000 \vskip\parskip \penalty\lastpenalty \fi
   %
   \vbox\bgroup
       \baselineskip=0pt\parskip=0pt\lineskip=0pt
@@ -7802,26 +7816,36 @@ end
 \def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
 \def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
 \def\ref#1{\xrefX[#1,,,,,,,]}
+%
+\newbox\topbox
+\newbox\printedrefnamebox
+\newbox\printedmanualbox
+%
 \def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
   \unsepspaces
-  \def\printedmanual{\ignorespaces #5}%
+  %
   \def\printedrefname{\ignorespaces #3}%
-  \setbox1=\hbox{\printedmanual\unskip}%
-  \setbox0=\hbox{\printedrefname\unskip}%
-  \ifdim \wd0 = 0pt
+  \setbox\printedrefnamebox = \hbox{\printedrefname\unskip}%
+  %
+  \def\printedmanual{\ignorespaces #5}%
+  \setbox\printedmanualbox  = \hbox{\printedmanual\unskip}%
+  %
+  % If the printed reference name (arg #3) was not explicitly given in
+  % the @xref, figure out what we want to use.
+  \ifdim \wd\printedrefnamebox = 0pt
     % No printed node name was explicitly given.
     \expandafter\ifx\csname SETxref-automatic-section-title\endcsname \relax
-      % Use the node name inside the square brackets.
+      % Not auto section-title: use node name inside the square brackets.
       \def\printedrefname{\ignorespaces #1}%
     \else
-      % Use the actual chapter/section title appear inside
-      % the square brackets.  Use the real section title if we have it.
-      \ifdim \wd1 > 0pt
-        % It is in another manual, so we don't have it.
+      % Auto section-title: use chapter/section title inside
+      % the square brackets if we have it.
+      \ifdim \wd\printedmanualbox > 0pt
+        % It is in another manual, so we don't have it; use node name.
         \def\printedrefname{\ignorespaces #1}%
       \else
         \ifhavexrefs
-          % We know the real title if we have the xref values.
+          % We (should) know the real title if we have the xref values.
           \def\printedrefname{\refx{#1-title}{}}%
         \else
           % Otherwise just copy the Info node name.
@@ -7835,6 +7859,7 @@ end
   \ifpdf
     {\indexnofonts
      \turnoffactive
+     \makevalueexpandable
      % This expands tokens, so do it after making catcode changes, so _
      % etc. don't get their TeX definitions.
      \getfilename{#4}%
@@ -7867,7 +7892,7 @@ end
   \iffloat\Xthisreftitle
     % If the user specified the print name (third arg) to the ref,
     % print it instead of our usual "Figure 1.2".
-    \ifdim\wd0 = 0pt
+    \ifdim\wd\printedrefnamebox = 0pt
       \refx{#1-snt}{}%
     \else
       \printedrefname
@@ -7875,21 +7900,46 @@ end
     %
     % if the user also gave the printed manual name (fifth arg), append
     % "in MANUALNAME".
-    \ifdim \wd1 > 0pt
+    \ifdim \wd\printedmanualbox > 0pt
       \space \putwordin{} \cite{\printedmanual}%
     \fi
   \else
     % node/anchor (non-float) references.
-    %
-    % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
-    % insert empty discretionaries after hyphens, which means that it will
-    % not find a line break at a hyphen in a node names.  Since some manuals
-    % are best written with fairly long node names, containing hyphens, this
-    % is a loss.  Therefore, we give the text of the node name again, so it
-    % is as if TeX is seeing it for the first time.
-    \ifdim \wd1 > 0pt
-      \putwordSection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}%
+    % 
+    % If we use \unhbox to print the node names, TeX does not insert
+    % empty discretionaries after hyphens, which means that it will not
+    % find a line break at a hyphen in a node names.  Since some manuals
+    % are best written with fairly long node names, containing hyphens,
+    % this is a loss.  Therefore, we give the text of the node name
+    % again, so it is as if TeX is seeing it for the first time.
+    % 
+    % Cross-manual reference.  Only include the "Section ``foo'' in" if
+    % the foo is neither missing or Top.  Thus, @xref{,,,foo,The Foo Manual}
+    % outputs simply "see The Foo Manual".
+    \ifdim \wd\printedmanualbox > 0pt
+      % What is the 7sp about?  The idea is that we also want to omit
+      % the Section part if we would be printing "Top", since they are
+      % clearly trying to refer to the whole manual.  But, this being
+      % TeX, we can't easily compare strings while ignoring the possible
+      % spaces before and after in the input.  By adding the arbitrary
+      % 7sp, we make it much less likely that a real node name would
+      % happen to have the same width as "Top" (e.g., in a monospaced font).
+      % I hope it will never happen in practice.
+      % 
+      % For the same basic reason, we retypeset the "Top" at every
+      % reference, since the current font is indeterminate.
+      % 
+      \setbox\topbox = \hbox{Top\kern7sp}%
+      \setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}%
+      \ifdim \wd2 > 7sp
+        \ifdim \wd2 = \wd\topbox \else
+          \putwordSection{} ``\printedrefname'' \putwordin{}\space
+        \fi
+      \fi
+      \cite{\printedmanual}%
     \else
+      % Reference in this manual.
+      %
       % _ (for example) has to be the character _ for the purposes of the
       % control sequence corresponding to the node, but it has to expand
       % into the usual \leavevmode...\vrule stuff for purposes of
@@ -7901,7 +7951,7 @@ end
        \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
        \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
       }%
-      % output the `[mynode]' via a macro so it can be overridden.
+      % output the `[mynode]' via the macro below so it can be overridden.
       \xrefprintnodename\printedrefname
       %
       % But we always want a comma and a space:
@@ -8281,7 +8331,7 @@ end
   it from ftp://tug.org/tex/epsf.tex.}
 %
 \def\image#1{%
-  \ifx\epsfbox\thisiundefined
+  \ifx\epsfbox\thisisundefined
     \ifwarnednoepsf \else
       \errhelp = \noepsfhelp
       \errmessage{epsf.tex not found, images will be ignored}%
@@ -8305,6 +8355,13 @@ end
   % If the image is by itself, center it.
   \ifvmode
     \imagevmodetrue
+  \else \ifx\centersub\centerV
+    % for @center @image, we need a vbox so we can have our vertical space
+    \imagevmodetrue
+    \vbox\bgroup % vbox has better behavior than vtop herev
+  \fi\fi
+  %
+  \ifimagevmode
     \nobreak\medskip
     % Usually we'll have text after the image which will insert
     % \parskip glue, so insert it here too to equalize the space
@@ -8314,9 +8371,13 @@ end
   \fi
   %
   % Leave vertical mode so that indentation from an enclosing
-  % environment such as @quotation is respected.  On the other hand, if
-  % it's at the top level, we don't want the normal paragraph indentation.
-  \noindent
+  %  environment such as @quotation is respected.
+  % However, if we're at the top level, we don't want the
+  %  normal paragraph indentation.
+  % On the other hand, if we are in the case of @center @image, we don't
+  %  want to start a paragraph, which will create a hsize-width box and
+  %  eradicate the centering.
+  \ifx\centersub\centerV\else \noindent \fi
   %
   % Output the image.
   \ifpdf
@@ -8328,7 +8389,10 @@ end
     \epsfbox{#1.eps}%
   \fi
   %
-  \ifimagevmode \medskip \fi  % space after the standalone image
+  \ifimagevmode
+    \medskip  % space after a standalone image
+  \fi  
+  \ifx\centersub\centerV \egroup \fi
 \endgroup}
 
 
-- 
1.7.9