Re: [avr-chat] Re: [avr-gcc-list] AVR ISP Error

[John Day]

At 09:23 AM 8/25/2005, Daniel Mayo wrote:
> Where is the 'program' button on the AVRISP?

He is referring purely to the procedure for the STK-500, it doesn't help you.

Go to:
http://www.avrfreaks.net/index.php?name=PNphpBB2&file=viewtopic&p=140815&POSTNUKESID=108f66c9c21f703d5f29b22c3f297a88

The thread there is about the exact same problem as I see it.

John



> Andi Suhandi wrote:
>
> > To Upgrade the firmware you have to:
> > 1. Turn off the STK
> > 2. Press "Program" Button on STK
> > 3. Turn on the power STK ("Program" button still pressed)
> > 4. Run the "Upgrade.exe" program in directory C:\Program Files\Atmel\AVR
> > Tools\STK500
> >    Press "Start Upgrade" button
> > 5.Then you can release "Program Button"
> > 6. Wait till upgrade done
> >
> > I hope it will help
> >
> > Andi
> >
> >
> > ----- Original Message -----
> > From: "Daniel Mayo" <address@hidden>
> > To: "AVR GCC List" <address@hidden>; "AVR Chat"
> > <address@hidden>
> > Sent: Thursday, August 25, 2005 3:17 AM
> > Subject: [avr-gcc-list] AVR ISP Error
> >
> >
> >
> >
> > > I just got two new AVR ISPs from Digikey and am getting this error when
> > > I try to connect to them via AVR Studio 4.11 Build 401 which seems to be
> > > the latest at atmel.com
> > >
> > > "An AVRISP with firmware version 2.01 has been detected.  The firmware
> > > corresponding to this installation of AVR Studio is 2.00.  Press OK to
> > > launch the upgrade program to perform a downgrade, or Cancel without
> > > downgrading.  NOTE! Correct operation is not guaranteed if a downgrade
> > > is not performed."
> > >
> > > If I press Cancel it seems as though everything works.
> > > If I press Ok, AVR Studio launches the Atmel STK500/AVRISP Upgrade
> > > program but after doing something to the AVRISP so that the LED goes out
> > > it then reports that no programmer could be found, and thus no update is
> > > performed, and then AVR Studio can't detect the AVRISP until I close AVR
> > > Studio AND cycle power to the AVRISP.
> > >
> > > How do I get rid of either the first warning or the error updating so
> > > that I can resolve this?
> > >
> > > I have looked online at atmel.com and avrfreaks.com, with no luck.
> > >
> > >
> > > _______________________________________________
> > > AVR-GCC-list mailing list
> > > address@hidden
> > > http://lists.nongnu.org/mailman/listinfo/avr-gcc-list
>
>
>
> _______________________________________________
> AVR-GCC-list mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/avr-gcc-list
>
>
> _______________________________________________
> AVR-chat mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/avr-chat