[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??)
From: |
Vincent Trouilliez |
Subject: |
Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??) |
Date: |
Tue, 15 Nov 2005 10:10:26 +0100 |
On Tue, 2005-11-15 at 00:24 +0000, Richard Urwin wrote:
> For what it's worth I have just built a ATmega16-16PI development board
> on stripboard. I have a 12MHz crystal with the terminals 0.2 and 0.4
> inches from their MCU pins and the capacitors 0.6 and 0.7 inches out
> from the MCU. It runs fine.
Hi Rich,
That sounds very close to my setup bar 12MHz instead of 16. could you
tell me exactly the contents of your fuse bits, read from the chip ?
You can use avrdude:
$avrdude -t (to enter 'terminal' mode)
the at the avrdude prompt, type:
> read hfuse
> read lfuse
Thanks in advance...
Regards,
--
Vince
- Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??), (continued)
- Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??), Anton Erasmus, 2005/11/12
- Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??), Bob Paddock, 2005/11/12
- Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??), Graham Davies, 2005/11/12
- Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??), Graham Davies, 2005/11/12
- Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??), Vincent Trouilliez, 2005/11/14
- Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??), Danilo Uccelli, 2005/11/14
- Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??), Graham Davies, 2005/11/14
- Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??), Joerg Wunsch, 2005/11/14
- Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??), Andy Warner, 2005/11/14
- Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??), Richard Urwin, 2005/11/14
- Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??),
Vincent Trouilliez <=
- Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??), Richard Urwin, 2005/11/16
- Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??), Vincent Trouilliez, 2005/11/17
- Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??), Erik Christiansen, 2005/11/14
- Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??), Neil Davey, 2005/11/14
- Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??), Vincent Trouilliez, 2005/11/15
- Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??), Graham Davies, 2005/11/15
- Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??), Vincent Trouilliez, 2005/11/15
- Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??), Joerg Wunsch, 2005/11/17
- Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??), Dan, 2005/11/17
- Re: [avr-chat] Crystals (was ATmega32 @ 16MHz : fuse bits ??), Joerg Wunsch, 2005/11/17