[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avr-gcc-list] Programming a DT006 on Win2K from GCC-AVR/AVR Studio
From: |
Alex Shepherd |
Subject: |
Re: [avr-gcc-list] Programming a DT006 on Win2K from GCC-AVR/AVR Studio 3 |
Date: |
Mon, 24 Jun 2002 22:36:20 +1200 |
> ISP = C:/avrgcc/bin/uisp.exe
> install: $(TARG)
> $(ISP) -v=3 -dprog=stk200 --hash=1024 --erase --upload
if=$(TARG).hex
Well I now have uisp working with the following command line:
uisp -dprog=dt006 --erase --upload if=LocoNetMon.hex -v=3 -dno-poll
If I don't att the -dno-poll option I get an error message:
#Error: Data polling readback status: write=0x1c read=0x7f
If device was erased disable polling with the -dno-poll option.
Is this bad or is there something else I need to do?
The device seems to program and run ok - it just takes about 15s to program
where as PonyProg takes about 7s which is about half the time...
Any suggestions?
Alex Shepherd
avr-gcc-list at http://avr1.org