[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avr-gcc-list] Handling High Speed Interrupts
From: |
Michal Vanka |
Subject: |
Re: [avr-gcc-list] Handling High Speed Interrupts |
Date: |
Thu, 23 Sep 2004 06:54:38 +0200 |
Personally I use assembler for such "high speed interrupt hanling".
Look at avrfreaks for serial port example.
http://www.avrfreaks.net/Freaks/freakshow.php?action=2&projectid=132
Michal Vanka
http://www.vanka.net home of AVR Embedded Ethernet controller
----- Original Message -----
From: "Ramkumar Rengaswamy" <address@hidden>
To: <address@hidden>
Sent: Wednesday, September 22, 2004 9:08 AM
Subject: [avr-gcc-list] Handling High Speed Interrupts
> Hi,
> I have an application that needs to generate a Timer Output Compare
> Interrput every 10 uS. I have an ATMega128L clocked at 7.329 MHz. This
> means that I have 74 clock cycles to handle the interrupt routine and
> currently most of the clock cycles are wasted in pushing and popping
> things off the stack. Is there anyway in avr-gcc to avoid all this
> overhead and utilize all the cycles for my processing only ?
>
> Thanks,
> -Ram
>
>
>
> _______________________________________________
> avr-gcc-list mailing list
> address@hidden
> http://www.avr1.org/mailman/listinfo/avr-gcc-list
>