RE: [avr-gcc-list] Unable to install interrupt vector for attiny2 313

[Steve Franks]

kchoo,

 

Unfortunately, Atmel changes the names of things in their datasheets from part to part.  In an effort to remain unambiguous, gccavr always uses the exact names from the datasheet.  Therefore, when changing devices, you will often need to changes port, device, or interrupt names.  Look in the iotn2313.h header in .../winavr/avr/include/avr and you will probably see something like SIG_OVRFLW1 defined instead of SIG_OVERFLOW1.  Just use that one and you should have no problems.

 

Steve

 

Steve Franks
Electrical Engineer
Tucson Embedded Systems
(520) 575-7283 x171

-----Original Message-----
From: choo kok seng [mailto:address@hidden
Sent: Monday, September 26, 2005 7:09 PM
To: address@hidden
Subject: [avr-gcc-list] Unable to install interrupt vector for attiny2313

 

Dear All,

       I tried to compile a simple code using SIGNAL API for Attiny2313 target, but I always hit the following warning:

main.c:14: warning: `SIG_OVERFLOW1' appears to be a misspelled signal handler

 

The full message is as follow:

avr-gcc (GCC) 3.4.3
Copyright (C) 2004 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Compiling: main.c
avr-gcc -c -mmcu=attiny2313 -I. -gdwarf-2 -DF_CPU=1000000UL -I../../../../Apps/WinAVR/avr/include  -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-adhlns=main.lst  -std=gnu99 -MD -MP -MF .dep/main.o.d main.c -o main.o

 

main.c:14: warning: `SIG_OVERFLOW1' appears to be a misspelled signal handler

 

Linking: main.elf
avr-gcc -mmcu=attiny2313 -I. -gdwarf-2 -DF_CPU=1000000UL -I../../../../Apps/WinAVR/avr/include  -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-adhlns=main.o  -std=gnu99 -MD -MP -MF .dep/main.elf.d main.o --output main.elf -Wl,-Map=main.map,--cref    -lm

 

 

I am using latest version of winavr from

http://sourceforge.net/forum/forum.php?forum_id=446217.

The interrupt handler is as follow :

SIGNAL ( SIG_OVERFLOW1 )

{

 

 //set PORTB.2 low
 PORTB ^= 0x1;

 

    // reload counter
    TCNT1 = 0xffff - 1000;

 

    /* enable interrupts */
    sei ();
}

 

The assembler listing is as follow:

00000000 <__vectors>:
   0: 12 c0        rjmp .+36      ; 0x26
   2: 2a c0        rjmp .+84      ; 0x58
   4: 29 c0        rjmp .+82      ; 0x58
   6: 28 c0        rjmp .+80      ; 0x58
   8: 27 c0        rjmp .+78      ; 0x58
   a: 26 c0        rjmp .+76      ; 0x58
   c: 25 c0        rjmp .+74      ; 0x58
   e: 24 c0        rjmp .+72      ; 0x58
  10: 23 c0        rjmp .+70      ; 0x58
  12: 22 c0        rjmp .+68      ; 0x58
  14: 21 c0        rjmp .+66      ; 0x58
  16: 20 c0        rjmp .+64      ; 0x58
  18: 1f c0        rjmp .+62      ; 0x58
  1a: 1e c0        rjmp .+60      ; 0x58
  1c: 1d c0        rjmp .+58      ; 0x58
  1e: 1c c0        rjmp .+56      ; 0x58
  20: 1b c0        rjmp .+54      ; 0x58
  22: 1a c0        rjmp .+52      ; 0x58
  24: 19 c0        rjmp .+50      ; 0x58

 

 

Apparently, the interrupt handler is not installed. The same code compiled and worked properly for Atmega8. Please advise on how to get the interrupt to work for attiny2313.

 

Thanks in advance.

 

regards

kchoo