Re: [avr-gcc-list] avrxmega7 device-not-found

[Shawn Rich]

The avr libc user manual shows that part under supported devices. Have you tried it?

http://www.nongnu.org/avr-libc/user-manual/index.html

shawn

On Thu, Nov 19, 2015 at 3:56 PM, Ajay Garg <address@hidden> wrote:

Senthil,

(I am just a newest newbie, but,) Assuming your hypothesis is correct, what should I pass to compile the code on http://www.atmel.com/tools/XMEGA-A3BUXPLAINED.aspx, using Atmel ATxmega256A3BU microcontroller?

Thanks everyone for the help so far...

On Thu, Nov 19, 2015 at 9:40 PM, Werner Harbrecht <address@hidden> wrote:

Hi,
at a quick view at
http://www.atmel.com/products/microcontrollers/avr/avr_xmega.aspx
I can't find any avrxmaga7.
May be that’s the fault?

Werner

>
> Hi All.
>
>
> I am trying to build a hello-world program using a linux-gcc-toolchain.
>
>
>
> Following is the program ::
>
> #####################################################
> /* ledblink.c, an LED blinking program */
>
> #include<avr/io.h>
> #include<util/delay.h>
> void sleep(uint8_t millisec)
> {
>         while(millisec)
>
>         {
>                 _delay_ms(1);/* 1 ms delay */
>                 millisec--;
>         }
> }
> main()
> {
>
>         DDRC |=1<<PC2;  /* PC2 will now be the output pin */
>         while(1)
>         {
>                 PORTC &= ~(1<<PC2);/* PC2 LOW */
>                 sleep(100);/* 100 ms delay */
>
>                 PORTC |=(1<<PC2); /* PC2 HIGH */
>                 sleep(100);/* 100 ms delay */
>         }
> }
> #####################################################
>
>
>
>
>
> When I compile with -mmcu=atmega8, the device is found, and the program
> builds fine.
>
>
>
>
> However with avrxmega7, it fails at the very beginning, with the error
> "device not found" ::
>
> #####################################################
> address@hidden:~$ avr-gcc -mmcu=avrxmega7 ledblink.c -o
> ledblink.o
> In file included from ledblink.c:2:0:
> /usr/lib/avr/include/avr/io.h:428:6: warning: #warning "device type not
> defined" [-Wcpp]
>  #    warning "device type not defined"
>       ^
> In file included from ledblink.c:3:0:
> /usr/lib/avr/include/util/delay.h:90:3: warning: #warning "F_CPU not
> defined for <util/delay.h>" [-Wcpp]
>  # warning "F_CPU not defined for <util/delay.h>"
>    ^
> /usr/lib/avr/include/util/delay.h:95:3: warning: #warning "Compiler
> optimizations disabled; functions from <util/delay.h> won't work as
> designed" [-Wcpp]
>  # warning "Compiler optimizations disabled; functions from
> <util/delay.h> won't work as designed"
>    ^
> ledblink.c: In function ‘main’:
> ledblink.c:16:9: error: ‘DDRC’ undeclared (first use in this function)
>          DDRC |=1<<PC2;  /* PC2 will now be the output pin */
>          ^
> ledblink.c:16:9: note: each undeclared identifier is reported only once
> for each function it appears in
> ledblink.c:16:19: error: ‘PC2’ undeclared (first use in this function)
>          DDRC |=1<<PC2;  /* PC2 will now be the output pin */
>                    ^
> ledblink.c:19:17: error: ‘PORTC’ undeclared (first use in this
> function)
>                  PORTC &= ~(1<<PC2);/* PC2 LOW */
> #####################################################
>
>
>
>
>
> Following are the various package-versions ::
>
> #####################################################
> address@hidden:~$ dpkg -l | grep avr
> ii  avr-libc                                              1:1.8.0-4.1
> all          Standard C library for Atmel AVR development
> ii  avrdude                                               6.0.1-1
> i386         software for programming Atmel AVR microcontrollers
> ii  binutils-avr                                          2.23.1-2.1
> i386         Binary utilities supporting Atmel's AVR targets
> ii  gcc-avr                                               1:4.8-2.1
> i386         The GNU C compiler (cross compiler for avr)
> ii  gdb-avr                                               7.6-1
> i386         The GNU Debugger for avr
> ii  libavresample2:i386                                   6:11-1trusty
> i386         Libav audio resampling library
> #####################################################
>
>
>
> What am I missing?
>
>
>
> --
>
> Regards,
> Ajay

_______________________________________________
AVR-GCC-list mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/avr-gcc-list

--

Regards,
Ajay

_______________________________________________
AVR-GCC-list mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/avr-gcc-list

--

~/shawn