[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Bayonne-devel] Bayonne randomly seg faults
From: |
Mike Whitton |
Subject: |
[Bayonne-devel] Bayonne randomly seg faults |
Date: |
Thu, 21 Oct 2004 14:24:30 -0400 (EDT) |
Hello. I have been running bayonne and it works great, however, if it
stays running for a long duration (2 to 3 days) it will randomly seg
fault. This only happens while it is in use. Below is the message from
the trace:
trace: pid=26651 reason=11
trace(0):
/usr/local/lib/bayonne/1.2.11/bayonne.bin(stackTrace__Q23ost5Debugi+0x2f)
[0x807ae5b]
trace(1): /usr/local/lib/bayonne/1.2.11/trace.dbg [0x400b9d2d]
trace(2): /lib/i686/libpthread.so.0 [0x401e6f75]
trace(3): /usr/local/lib/bayonne/1.2.11/bayonne.bin [0x42029098]
trace(4): /usr/local/lib/libccgnu2-1.0.so.0 [0x4009a132]
trace(5): /lib/i686/libpthread.so.0 [0x401e3fef]
trace(6): /usr/local/lib/bayonne/1.2.11/bayonne.bin(__clone+0x3a)
[0x420e779a]
can any shed any light onto this?
here is my config:
Redhat Linux 7.3
Dialogic Drivers 5.1 FP1 (the purchased ones)
- used kernel and LiS packages included with dialogic driver
Bayonne 1.2.11
Common C++ 1.0.13
ccScript 2.5.6
ccAudio 1.1.1
ccrtp 1.0.2
thanks for the help, the system other than this is working great, we just
need to stabilize it...
mike whitton
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Bayonne-devel] Bayonne randomly seg faults,
Mike Whitton <=