[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Bayonne-devel] Maxinum Inbound phone support

From: andrew wong
Subject: Re: [Bayonne-devel] Maxinum Inbound phone support
Date: Fri, 6 Jul 2007 13:09:45 +0800

Dear Stephen,

Thanks very much!

May I know the hardware config to support such level bayonne configuration?

It would be great help too if it's not mind to share some examples of
server.conf and driver.conf to support large number parallel calls with


2007/7/5, Stephen Barclay <address@hidden>:

andrew wong wrote:
> Dear all,
> We're setting up IVR/Call center server with Bayonne and recently we
> did a 16-way parallel call testing and the result is quite
> disappointed. e.g.
> great delay,
> the ccscript hang after a few minutes, user A's press button affected
> user
> B, etc.
> I know that the main course maybe the configuration/ccscript and driver
> problem since we're
> using China made Synway telephony broads.  Just hope to ask if there
> is any
> successful case
> of using Bayonne and the maximum numbers of concurrent call experienced.
> Thanks very much!
> Andrew
> _______________________________________________
> Bayonne-devel mailing list
> address@hidden

   Just as a benchmark

   I use Bayonne 1.2.15 and Dialogic (Global Call) and I have 312 ports
per machine
   and can get to 80% capacity.. This is all outbound dialing to

   We dial out, do answer detection, play message and elicit dtmf
responses and store
   to database..

   To get past the 10 T1 limit I had to tweak LiS  (increase the number
of fifo's) otherwise
   code would die creating pipe's...


Stephen Barclay
stephen 'at'

reply via email to

[Prev in Thread] Current Thread [Next in Thread]