bug-gnu-emacs
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

bug#4760: marked as done (23.1.50; C-x v a gone wild.)


From: Emacs bug Tracking System
Subject: bug#4760: marked as done (23.1.50; C-x v a gone wild.)
Date: Wed, 21 Oct 2009 09:35:11 +0000

Your message dated Wed, 21 Oct 2009 11:29:31 +0200
with message-id <4ADED47B.6090400@swipnet.se>
and subject line Re: bug#4760: 23.1.50; C-x v a gone wild.
has caused the Emacs bug report #4760,
regarding 23.1.50; C-x v a gone wild.
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@emacsbugs.donarmstrong.com
immediately.)


-- 
4760: http://emacsbugs.donarmstrong.com/cgi-bin/bugreport.cgi?bug=4760
Emacs Bug Tracking System
Contact owner@emacsbugs.donarmstrong.com with problems
--- Begin Message --- Subject: 23.1.50; C-x v a gone wild. Date: Mon, 19 Oct 2009 20:31:04 +0200
Please write in English if possible, because the Emacs maintainers
usually do not have translators to read other languages for them.

Your bug report will be posted to the emacs-pretest-bug@gnu.org mailing list.

Please describe exactly what actions triggered the bug
and the precise symptoms of the bug:

C-x v a computes change log entries for a very long time.
Then it inserts an entry with lot of old stuff included.
It doesn't respect user-full-name or user-mail-address.
The change isn't mentioned in NEWS, is there a switch to get back the
old C-x v a?

The entry here is what C-x v a inserted, the second is the
change I made and already made a change log entry for.
Note also the bad formatting (3 lines) done w.r.t. the original one
(2 lines).


2009-10-19  author  <author@gaffa>

        * ChangeLog, xterm.c (x_create_toolkit_scroll_bar):
        Don't allocate color for
        pixel -1 (bug #4742).

        * nsimage.m, nsmenu.m, nsselect.m, nsterm.m, ChangeLog, nsfns.m, 
nsfont.m:
        * nsterm.m:
        * nsselect.m:
        * nsmenu.m:
        * nsimage.m:
        * nsfont.m:
        * nsfns.m: Include setjmp.h.  (Bug#4643)

        * ChangeLog, process.c:
        * process.c (create_pty): Remove conditionals for no longer
        supported systems: UNIPLUS and RTU.

        * ChangeLog, xfns.c, xterm.c: * xterm.c:
        * xfns.c: Remove always true condition: XtSpecificationRelease >= 5.

        * w32term.c, w32uniscribe.c, w32xfns.c, widget.c, window.c, xdisp.c, 
xfaces.c, xfns.c, xfont.c, xftfont.c, xmenu.c, xrdb.c, xselect.c, xsmfns.c, 
xterm.c, ChangeLog, alloc.c, atimer.c, buffer.c, bytecode.c, callint.c, 
callproc.c, casefiddle.c, casetab.c, category.c, ccl.c, character.c, charset.c, 
chartab.c, cm.c, cmds.c, coding.c, composite.c, data.c, dbusbind.c, dired.c, 
dispnew.c, doc.c, doprnt.c, dosfns.c, editfns.c, emacs.c, eval.c, fileio.c, 
filelock.c, floatfns.c, fns.c, font.c, fontset.c, frame.c, fringe.c, ftfont.c, 
ftxfont.c, gtkutil.c, image.c, indent.c, insdel.c, intervals.c, keyboard.c, 
keymap.c, lisp.h, macros.c, marker.c, menu.c, minibuf.c, msdos.c, print.c, 
process.c, ralloc.c, regex.c, region-cache.c, scroll.c, search.c, sheap.c, 
sound.c, syntax.c, term.c, termcap.c, terminal.c, terminfo.c, textprop.c, 
tparam.c, undo.c, unexaix.c, unexcw.c, unexec.c, unexsol.c, vm-limit.c, 
w16select.c, w32.c, w32console.c, w32fns.c, w32font.c, w32heap.c, w32inevt.c, 
w32menu.c, w32proc.c, w32reg.c, w32select.c:
        * alloc.c: Do not define struct catchtag.
        * eval.c: Move struct catchtag definition ...
        * lisp.h: ... here.

        * image.c: Move png.h #include earlier to avoid warnings.

        * xterm.c:
        * xsmfns.c:
        * xselect.c:
        * xrdb.c:
        * xmenu.c:
        * xftfont.c:
        * xfont.c:
        * xfns.c:
        * xfaces.c:
        * xdisp.c:
        * window.c:
        * widget.c:
        * w32xfns.c:
        * w32uniscribe.c:
        * w32term.c:
        * w32select.c:
        * w32reg.c:
        * w32proc.c:
        * w32menu.c:
        * w32inevt.c:
        * w32heap.c:
        * w32font.c:
        * w32fns.c:
        * w32console.c:
        * w32.c:
        * w16select.c:
        * vm-limit.c:
        * unexsol.c:
        * unexec.c:
        * unexcw.c:
        * unexaix.c:
        * undo.c:
        * tparam.c:
        * textprop.c:
        * terminfo.c:
        * terminal.c:
        * termcap.c:
        * term.c:
        * syntax.c:
        * sound.c:
        * sheap.c:
        * search.c:
        * scroll.c:
        * region-cache.c:
        * regex.c:
        * ralloc.c:
        * process.c:
        * print.c:
        * msdos.c:
        * minibuf.c:
        * menu.c:
        * marker.c:
        * macros.c:
        * keymap.c:
        * keyboard.c:
        * intervals.c:
        * insdel.c:
        * indent.c:
        * gtkutil.c:
        * ftxfont.c:
        * ftfont.c:
        * fringe.c:
        * frame.c:
        * fontset.c:
        * font.c:
        * fns.c:
        * floatfns.c:
        * filelock.c:
        * fileio.c:
        * emacs.c:
        * editfns.c:
        * dosfns.c:
        * doprnt.c:
        * doc.c:
        * dispnew.c:
        * dired.c:
        * dbusbind.c:
        * data.c:
        * composite.c:
        * coding.c:
        * cmds.c:
        * cm.c:
        * chartab.c:
        * charset.c:
        * character.c:
        * ccl.c:
        * category.c:
        * casetab.c:
        * casefiddle.c:
        * callproc.c:
        * callint.c:
        * bytecode.c:
        * buffer.c:
        * atimer.c: Include setjmp.h.  (Bug#4643)

        * xlwmenu.c:
        * lwlib.c:
        * lwlib-utils.c:
        * lwlib-Xm.c:
        * lwlib-Xlw.c:
        * lwlib-Xaw.c: Include setjmp.h.

2009-10-19  Jan Djärv  <jan.h.d@swipnet.se>

        * xterm.c (x_create_toolkit_scroll_bar): Don't allocate color for
        pixel -1 (bug #4742).



If Emacs crashed, and you have the Emacs process in the gdb debugger,
please include the output from the following gdb commands:
    `bt full' and `xbacktrace'.
If you would like to further debug the crash, please read the file
/home/jhd/src/emacs-cvs/etc/DEBUG for instructions.


In GNU Emacs 23.1.50.5 (x86_64-unknown-linux-gnu, X toolkit, Xaw3d scroll bars)
 of 2009-10-19 on gaffa
Windowing system distributor `The X.Org Foundation', version 11.0.10600000
configured using `configure  '--prefix=/opt/emacs-cvs' '--verbose' 
'--enable-asserts' '--with-x-toolkit=athena' 'CFLAGS=-g''

Important settings:
  value of $LC_ALL: nil
  value of $LC_COLLATE: C
  value of $LC_CTYPE: nil
  value of $LC_MESSAGES: nil
  value of $LC_MONETARY: nil
  value of $LC_NUMERIC: nil
  value of $LC_TIME: nil
  value of $LANG: sv_SE.UTF-8
  value of $XMODIFIERS: nil
  locale-coding-system: utf-8-unix
  default enable-multibyte-characters: t

Major mode: Change Log

Minor modes in effect:
  delete-selection-mode: t
  icomplete-mode: t
  display-time-mode: t
  tooltip-mode: t
  mouse-wheel-mode: t
  tool-bar-mode: t
  file-name-shadow-mode: t
  global-font-lock-mode: t
  font-lock-mode: t
  global-auto-composition-mode: t
  auto-composition-mode: t
  auto-encryption-mode: t
  auto-compression-mode: t
  line-number-mode: t
  transient-mark-mode: t

Recent input:
<down-mouse-1> <mouse-1> C-x v a <down-mouse-1> <mouse-1> 
<down-mouse-1> <mouse-1> <escape> < C-x 1 <next> <next> 
<next> <escape> < C-SPC <next> <next> <next> <down> 
<down> <down> <down> <escape> w M-x r e p o <tab> r 
<tab> <return>

Recent messages:
Loading icomplete...done
Loading /home/jhd/lib/elisp/saveframe.el (source)...done
For information about GNU Emacs and the GNU system, type C-h C-a.
Mark set
Computing change log entries... done
Mark set [3 times]
Saved text from "2009-10-19  author  <author@gaffa>

        * C"
Making completion list...

Load-path shadows:
None found.

Features:
(shadow mail-extr message ecomplete rfc822 mml mml-sec password-cache
mm-decode mm-bodies mm-encode mailcap mail-parse rfc2231 rfc2047 rfc2045
qp ietf-drums mailabbrev nnheader gnus-util netrc time-date mm-util
mail-prsvr gmm-utils wid-edit mailheader canlock sha1 hex-util hashcash
mail-utils emacsbug sendmail help-mode view parse-time add-log vc-cvs
vc-rcs vc vc-dispatcher desktop msb delsel icomplete cc-mode cc-fonts
easymenu cc-menus cc-cmds cc-styles cc-align cc-engine cc-vars cc-defs
regexp-opt time tooltip ediff-hook vc-hooks lisp-float-type mwheel x-win
x-dnd tool-bar dnd fontset image fringe lisp-mode register page menu-bar
rfn-eshadow timer select scroll-bar mldrag mouse jit-lock font-lock
syntax facemenu font-core frame cham georgian utf-8-lang misc-lang
vietnamese tibetan thai tai-viet lao korean japanese hebrew greek
romanian slovak czech european ethiopic indian cyrillic chinese
case-table epa-hook jka-cmpr-hook help simple abbrev loaddefs button
minibuffer faces cus-face text-properties overlay md5 base64 format env
code-pages mule custom widget hashtable-print-readable backquote
make-network-process dbusbind x-toolkit x multi-tty emacs)


--- End Message ---
--- Begin Message --- Subject: Re: bug#4760: 23.1.50; C-x v a gone wild. Date: Wed, 21 Oct 2009 11:29:31 +0200 User-agent: Thunderbird 2.0.0.23 (Macintosh/20090812)


Dan Nicolaescu skrev:
jan.h.d@swipnet.se.?= (Jan =?UTF-8?Q?Dj=C3=A4rv) writes:

  > Please write in English if possible, because the Emacs maintainers
  > usually do not have translators to read other languages for them.
> > Your bug report will be posted to the emacs-pretest-bug@gnu.org mailing list. > > Please describe exactly what actions triggered the bug
  > and the precise symptoms of the bug:
> > C-x v a computes change log entries for a very long time.
  > Then it inserts an entry with lot of old stuff included.
  > It doesn't respect user-full-name or user-mail-address.
  > The change isn't mentioned in NEWS, is there a switch to get back the
  > old C-x v a?

AFAICT nothing has changed in this area for a long time.

If you could send some step by step instructions on how to reproduce
this with an old version that works the way you expect, it might not be
too hard to find what changed...
(I've never used this command, so I don't know what to expect of it).

Never mind, I was looking at the wrong command. :-(
I got to get out more, sorry for the noise.

        Jan D.

--- End Message ---

reply via email to

[Prev in Thread] Current Thread [Next in Thread]