[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Autoconf install error

From: Dr. John W. Glendening
Subject: Autoconf install error
Date: Fri, 6 Oct 2000 22:40:44 GMT

Trying to install autoconf 2.13 on my SGI Indigo2 with Irix5.3 and gcc
2.7.2 I get the following listing when running "make" (the Makefile is
listed below)

        rm -f autoconf autoconf.tmp
        sed -e 's,@''datadir''@,/usr/local/share/autoconf,g' -e
 's,@''M4''@,/bin/m4,g'  -e 's,@''AWK''@,nawk,g'  -e 's,@''SHELL''@,/bin/sh,g'
autoconf.sh > autoconf.tmp && chmod +x autoconf.tmp && mv autoconf.tmp autoconf
        rm -f autoheader autoheader.tmp
        sed -e 's,@''datadir''@,/usr/local/share/autoconf,g' -e
 's,@''M4''@,/bin/m4,g'  -e 's,@''AWK''@,nawk,g'  -e 's,@''SHELL''@,/bin/sh,g'
autoheader.sh > autoheader.tmp && chmod +x autoheader.tmp && mv autoheader.tmp
        rm -f autoreconf autoreconf.tmp
        sed -e 's,@''datadir''@,/usr/local/share/autoconf,g' -e
 's,@''M4''@,/bin/m4,g'  -e 's,@''AWK''@,nawk,g'  -e 's,@''SHELL''@,/bin/sh,g'
autoreconf.sh > autoreconf.tmp && chmod +x autoreconf.tmp && mv autoreconf.tmp
        rm -f autoupdate autoupdate.tmp
        sed -e 's,@''datadir''@,/usr/local/share/autoconf,g' -e
 's,@''M4''@,/bin/m4,g'  -e 's,@''AWK''@,nawk,g'  -e 's,@''SHELL''@,/bin/sh,g'
autoupdate.sh > autoupdate.tmp && chmod +x autoupdate.tmp && mv autoupdate.tmp
        rm -f ifnames ifnames.tmp
        sed -e 's,@''datadir''@,/usr/local/share/autoconf,g' -e
 's,@''M4''@,/bin/m4,g'  -e 's,@''AWK''@,nawk,g'  -e 's,@''SHELL''@,/bin/sh,g'
ifnames.sh > ifnames.tmp && chmod +x ifnames.tmp && mv ifnames.tmp ifnames
        rm -f autoscan autoscan.tmp
        sed -e 's,@''datadir''@,/usr/local/share/autoconf,g' -e
's,@''PERL''@,/usr/local/bin/perl,g' autoscan.pl > autoscan.tmp && chmod +x
autoscan.tmp && mv autoscan.tmp autoscan
   *** Error code 1 (bu21)

The configure run seems to have no errors, with listing:

   loading cache ./config.cache
   checking for gm4... (cached) /bin/m4
   checking for mawk... (cached) nawk
   checking for perl... (cached) /usr/local/bin/perl
   checking for a BSD compatible install... (cached) /usr/local/bin/install -c
   creating ./config.status
   creating Makefile

Any suggestion for identifying and eliminating the error would be appreciated.

--- Makefile listing
# Generated automatically from Makefile.in by configure.
# Makefile for Autoconf.
# Copyright (C) 1992, 1993, 1994, 1998 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.

#### Start of system configuration section. ####

srcdir = .

INSTALL = /usr/local/bin/install -c
MAKEINFO = makeinfo
TEXI2DVI = texi2dvi
M4 = /bin/m4
AWK = nawk
PERL = /usr/local/bin/perl

# Programs that are ALWAYS installed (and are created in the build dir).
ASCRIPTS = autoconf autoheader autoreconf autoupdate ifnames

# M4 input that is frozen.
M4FROZEN = autoconf.m4f autoheader.m4f

# All programs, including those only installed if you have perl.
SCRIPTS = $(ASCRIPTS) autoscan


prefix = /usr/local
exec_prefix = ${prefix}

# Directory in which to install scripts.
bindir = ${exec_prefix}/bin

# Directory in which to install library files.
datadir = ${prefix}/share
acdatadir = $(datadir)/autoconf

# Directory in which to install documentation info files.
infodir = ${prefix}/info

#### End of system configuration section. ####

SHELL = /bin/sh

SUBDIRS = testsuite

M4FILES = autoconf.m4 acgeneral.m4 acoldnames.m4 acspecific.m4 autoheader.m4

# Files that can be generated, but should be up to date for a distribution.
DISTDEP = info Makefile
# Files to distribute.
        Makefile.in NEWS README TODO $(M4FILES) \
        acconfig.h acfunctions acheaders acidentifiers \
        acmakevars acprograms autoconf.info* \
        autoconf.sh autoconf.texi install.texi \
        autoheader.sh autoscan.pl autoreconf.sh autoupdate.sh ifnames.sh \
        config.guess config.sub configure configure.in \
        install-sh mkinstalldirs texinfo.tex \
        testsuite/Makefile.in testsuite/config/*.exp \
        testsuite/lib/*.exp testsuite/autoconf.[gs]/*.exp \
        standards.texi make-stds.texi standards.info*

editsh = sed -e 's,@''datadir''@,$(acdatadir),g' -e \
        's,@''M4''@,$(M4),g'  -e 's,@''AWK''@,$(AWK),g' \
        -e 's,@''SHELL''@,$(SHELL),g'
editpl = sed -e 's,@''datadir''@,$(acdatadir),g' -e 's,@''PERL''@,$(PERL),g'

all: ${SCRIPTS} ${M4FROZEN} info

.SUFFIXES: .sh .pl .m4 .m4f

        rm -f $@ address@hidden
        $(editsh) $< > address@hidden && chmod +x address@hidden && mv 
address@hidden $@

        rm -f $@ address@hidden
        $(editpl) $< > address@hidden && chmod +x address@hidden && mv 
address@hidden $@

        @case `$(M4) --help </dev/null 2>&1` in \
        *reload-state*) echo freezing $*.m4; \
          $(M4) -F $*.m4f -I${srcdir} ${srcdir}/$*.m4 ;; \
        *traditional*) ;; \
        *) echo Error: Autoconf requires GNU m4 1.1 or later; exit 1 ;; \

autoconf.m4f: autoconf.m4 acgeneral.m4 acspecific.m4 acoldnames.m4
autoheader.m4f: autoheader.m4 acgeneral.m4 acspecific.m4 acoldnames.m4

info: autoconf.info standards.info INSTALL

# Use --no-split to avoid creating filenames > 14 chars.
autoconf.info: autoconf.texi install.texi
        $(MAKEINFO) -I$(srcdir) $(srcdir)/autoconf.texi --no-split --output=$@

INSTALL: install.texi
        $(MAKEINFO) -I$(srcdir) $(srcdir)/install.texi --output=$@ \
        --no-headers --no-validate

standards.info: standards.texi make-stds.texi
        $(MAKEINFO) -I$(srcdir) $(srcdir)/standards.texi --no-split --output=$@

dvi: autoconf.dvi standards.dvi

autoconf.dvi: autoconf.texi
        $(TEXI2DVI) $(srcdir)/autoconf.texi

standards.dvi: standards.texi make-stds.texi
        $(TEXI2DVI) $(srcdir)/standards.texi

check: all
        rootme=`pwd`; srcrootme=`cd $(srcdir); pwd`; \
        test -r install-sh || cp $(srcdir)/install-sh .; \
        cd testsuite && ${MAKE} $@ AUTOCONF=$$rootme/autoconf \
        AUTOCONFFLAGS="-m $$srcrootme"

installcheck: all install
        cd testsuite && ${MAKE} AUTOCONF=${bindir}/autoconf $@

        $(SHELL) ${srcdir}/mkinstalldirs $(bindir) $(infodir) $(acdatadir)

install: all $(M4FILES) acconfig.h installdirs install-info
        for p in $(ASCRIPTS); do \
          $(INSTALL_PROGRAM) $$p $(bindir)/`echo $$p|sed '$(transform)'`; \
        for i in $(M4FROZEN); do \
          $(INSTALL_DATA) $$i $(acdatadir)/$$i; \
        for i in $(M4FILES) acconfig.h; do \
          $(INSTALL_DATA) $(srcdir)/$$i $(acdatadir)/$$i; \
        -if test -f autoscan; then \
        $(INSTALL_PROGRAM) autoscan $(bindir)/`echo autoscan|sed
'$(transform)'`; \
        for i in acfunctions acheaders acidentifiers acprograms \
          acmakevars; do \
        $(INSTALL_DATA) $(srcdir)/$$i $(acdatadir)/$$i; \
        done; \
        else :; fi

# Don't cd, to avoid breaking install-sh references.
install-info: info installdirs
        if test -f autoconf.info; then \
          for i in *.info*; do \
            $(INSTALL_DATA) $$i $(infodir)/$$i; \
          done; \
        else \
          for i in $(srcdir)/*.info*; do \
            $(INSTALL_DATA) $$i $(infodir)/`echo $$i | sed 's|^$(srcdir)/||'`;
          done; \

        for p in $(SCRIPTS); do \
          rm -f $(bindir)/`echo $$p|sed '$(transform)'`; \
        rm -fr $(acdatadir)
        cd $(infodir) && rm -f autoconf.info*
        if test -f standards.info || test -f $(srcdir)/standards.info; \
        then cd $(infodir) && rm -f standards.info*; fi

${srcdir}/configure: configure.in $(M4FILES)
        cd $(srcdir) && \
        rm -f configure configure.tmp && \
        $(M4) autoconf.m4 configure.in > configure.tmp && \
        chmod +x configure.tmp && mv configure.tmp configure
Makefile: Makefile.in config.status
        $(SHELL) ./config.status
config.status: configure
        $(SHELL) ./config.status --recheck

        @echo "This command is intended for maintainers to use;"
        @echo "rebuilding the deleted files requires makeinfo."
        rm -f TAGS *.info* INSTALL

clean mostlyclean distclean maintainer-clean::
        for dir in $(SUBDIRS); do \
          echo making $@ in $$dir ; \
          (cd $$dir && $(MAKE) $@) ; \

clean mostlyclean distclean maintainer-clean::
        rm -f $(SCRIPTS) *.tmp
        rm -f *.aux *.cp *.cps *.dvi *.fn *.fns *.ky *.kys *.log
        rm -f *.pg *.pgs *.toc *.tp *.tps *.vr *.vrs
        rm -f *.ev *.evs *.ov *.ovs *.cv *.cvs *.ma *.mas

distclean maintainer-clean::
        rm -f Makefile config.status config.cache config.log

        etags ${srcdir}/*.m4 ${srcdir}/*.sh ${srcdir}/[a-z]*.in

# Don't depend on DISTFILES because there's no rule for "standards.info*".
dist: $(DISTDEP)
        distname=`sed -e '/define(AC_ACVERSION,/!d' \
        -e 's/[^0-9.]*\([0-9.]*\).*/autoconf-\1/' -e q acgeneral.m4`; \
        rm -fr $$distname; \
        mkdir $$distname $$distname/testsuite $$distname/testsuite/config \
        $$distname/testsuite/lib $$distname/testsuite/autoconf.g \
        $$distname/testsuite/autoconf.s; \
        for file in $(DISTFILES); do \
          ln $$file $$distname/$$file \
          || { echo copying $$file instead; cp -p $$file $$distname/$$file;}; \
        done; \
        chmod -R a+rX $$distname; \
        tar -chz -f $$distname.tar.gz $$distname; \
        rm -fr $$distname

MAIL|  Dr. John W. (Jack) Glendening          Meteorologist
SENT|  Naval Research Lab - Monterey          address@hidden
FROM|  7 Grace Hopper Ave Monterey, CA 93943  831-656-4725

reply via email to

[Prev in Thread] Current Thread [Next in Thread]