[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: help with "Read Error"?

From: Weber, Aaron
Subject: RE: help with "Read Error"?
Date: Thu, 30 May 2002 11:16:15 -0700

I believe they are ENABLED...should I change this?

Thanks for your time!

-----Original Message-----
From: Thierry Laronde
To: Weber, Aaron
Cc: 'address@hidden'
Sent: 5/30/2002 11:02 AM
Subject: Re: help with "Read Error"?

On Thu, May 30, 2002 at 05:46:25AM -0700, Weber, Aaron wrote:
> Can anyone help me troubleshoot this...
> I have RH 7.3 installed on an IBM 36GB SCSI drive (Adaptec
> There WAS another SCSI drive in the box that had no Linux partitions
on it,
> and it was flaking-out.  So I removed it and made sure the line was
> terminated correctly.
> Now, when the box boots, the BIOS and SCSI card init correctly.  But I
> the following at the end, and then the box hangs...
> GRUB Loading Phase2...Read Error

Are the INT13 SCSI extensions disable in your BIOS?

Thierry Laronde (Alceste) <address@hidden>
Key fingerprint = 0FF7 E906 FBAF FE95 FD89  250D 52B1 AE95 6006 F40C

reply via email to

[Prev in Thread] Current Thread [Next in Thread]