[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Removing qlogicisp binary only firmware from GNU Mach

From: Guillem Jover
Subject: Re: Removing qlogicisp binary only firmware from GNU Mach
Date: Wed, 27 Oct 2004 06:23:33 +0200
User-agent: Mutt/1.5.6+20040907i


On Wed, Oct 27, 2004 at 05:46:36AM +0200, Alfred M. Szmidt wrote:
> The same applies to your your qlogicisp binary removal patch,
>       * linux/src/drivers/scsi/qlogicisp.c: Copied to ...
>       * linux/dev/drivers/scsi/qlogicisp.c: ... here.
> this isn't needed.  Duplicating code like this for no obvious reason
> is not needed.  Even if you do modify it a bit to get it work.  dev/
> should really only contain ugly hacks like utterly crappy glue code
> and other stupidities.

Ok, I got it wrong how those directories were used.

Here is the revised patch. The commiter should remove the
"qlogicisp_asm.c" file.


2004-10-27  Guillem Jover  <address@hidden>

        * linux/src/drivers/scsi/qlogicisp_asm.c: Remove file with binary
        only firmware.
        * linux/src/drivers/scsi/qlogicisp.c: Do not include "qlogicisp_asm.c".
        (RELOAD_FIRMWARE): Set to 0.
        (risc_code_addr01): New variable from qlogicisp_asm.c.
        * linux/Files: Remove linux/src/drivers/scsi/qlogicisp_asm.c.

diff -Naur -x CVS gnumach.orig/linux/Files gnumach/linux/Files
--- gnumach.orig/linux/Files    2002-05-23 02:06:26.000000000 +0200
+++ gnumach/linux/Files 2004-10-27 06:04:12.000000000 +0200
@@ -198,7 +198,6 @@
diff -Naur -x CVS gnumach.orig/linux/src/drivers/scsi/qlogicisp.c 
--- gnumach.orig/linux/src/drivers/scsi/qlogicisp.c     2004-10-27 
03:06:03.000000000 +0200
+++ gnumach/linux/src/drivers/scsi/qlogicisp.c  2004-10-27 06:04:45.000000000 
@@ -105,7 +105,7 @@
    the latest firmware provided by QLogic.  This may be an earlier/later
    revision than supplied by your board. */
-#define RELOAD_FIRMWARE                1
+#define RELOAD_FIRMWARE                0
 /* Set the following macro to 1 to reload the ISP1020's defaults from nvram.
    If you are not sure of your settings, leave this alone, the driver will
@@ -433,7 +433,7 @@
 #define MBOX_WRITE_FOUR_RAM_WORDS      0x0041
 #define MBOX_EXEC_BIOS_IOCB            0x0042
-#include "qlogicisp_asm.c"
+unsigned short risc_code_addr01 = 0x1000 ;
 #define PACKB(a, b)                    (((a)<<4)|(b))

reply via email to

[Prev in Thread] Current Thread [Next in Thread]