bug-hurd
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH 1/5] exec: remove support for transparently unbzip2ing executable


From: Justus Winter
Subject: [PATCH 1/5] exec: remove support for transparently unbzip2ing executables
Date: Thu, 15 Aug 2013 18:41:50 +0200

Remove support for transparently unbzip2ing executables from the exec
server. The code in question makes the exec server unnecessarily
complex and since the exec server is an essential process, crashing it
makes /hurd/init crash the whole system.

Since the bzip2 code is not thread-safe, all access to it is
serialized, so there is a trivial way for one user to delay another
users bzip2ed executables for some unspecified time.

This can be accomplished by padding any program with easily compressed
data, zipping it and executing it. Using such a program as an passive
translator and then triggering its execution by the filesystem
translator also stalls any requests to that filesystem (observed using
the libdiskfs-based ext2fs).

Since compressed executables cannot be mapped into the memory, they
have to be uncompressed into allocated memory first. This is slower
and any user with access to the exec server can make it allocate
arbitrary amounts of memory. If the Hurd had proper memory accounting,
this would probably be a way around it.

So the compression support in exec seemingly creates various issues
for little value, at least with the abundance of nonvolatile memory
available today.

* exec/Makefile: Remove bzip2 related files.
* exec/exec.c: Remove anything #ifdef BZIP2ed.
* exec/do-bunzip2.c: Move to libstore.
---
 exec/Makefile         |    8 +-
 exec/do-bunzip2.c     | 1745 -------------------------------------------------
 exec/exec.c           |  124 ----
 libstore/do-bunzip2.c | 1745 +++++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 1748 insertions(+), 1874 deletions(-)
 delete mode 100644 exec/do-bunzip2.c
 create mode 100644 libstore/do-bunzip2.c

diff --git a/exec/Makefile b/exec/Makefile
index 3fc8273..1dc9d56 100644
--- a/exec/Makefile
+++ b/exec/Makefile
@@ -21,14 +21,12 @@ dir := exec
 makemode := server
 
 SRCS = exec.c main.c hashexec.c hostarch.c \
-       $(gzip-sources) $(bzip2-sources)
+       $(gzip-sources)
 OBJS = main.o hostarch.o exec.o hashexec.o \
        execServer.o exec_startupServer.o \
-       $(gzip-objects) $(bzip2-objects)
+       $(gzip-objects)
 gzip-sources = unzip.c util.c inflate.c
 gzip-objects = $(gzip-sources:%.c=%.o)
-bzip2-sources = do-bunzip2.c
-bzip2-objects = $(bzip2-sources:%.c=%.o)
 
 target = exec
 #targets = exec exec.static
@@ -40,6 +38,6 @@ exec-MIGSFLAGS = -imacros $(srcdir)/execmutations.h
 
 include ../Makeconf
 
-CPPFLAGS += -DGZIP -DBZIP2 # -DBFD
+CPPFLAGS += -DGZIP # -DBFD
 
 exec.static exec: $(OBJS) $(library_deps)
diff --git a/exec/do-bunzip2.c b/exec/do-bunzip2.c
deleted file mode 100644
index 716a0cd..0000000
--- a/exec/do-bunzip2.c
+++ /dev/null
@@ -1,1745 +0,0 @@
-/* bunzip2 engine, modified by address@hidden */
-
-/* Stolen from util.c. */
-#include <stdio.h>
-#include <sys/types.h>
-
-/* I/O interface */
-extern int (*unzip_read) (char *buf, size_t maxread);
-extern void (*unzip_write) (const char *buf, size_t nwrite);
-extern void (*unzip_read_error) (void);
-extern void (*unzip_error) (const char *msg);
-
-/* bzip2 doesn't require window sliding. Just for buffering. */
-#define INBUFSIZ       0x1000
-#define OUTBUFSIZ      0x1000
-
-static unsigned char inbuf[INBUFSIZ];
-static unsigned char outbuf[OUTBUFSIZ];
-static unsigned inptr;
-static unsigned insize;
-static unsigned outcnt;
-
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty.
- */
-static int
-fill_inbuf (int eof_ok)
-{
-  int len;
-  
-  /* Read as much as possible */
-  insize = 0;
-  do
-    {
-      len = (*unzip_read)((char*)inbuf+insize, INBUFSIZ-insize);
-      if (len == 0 || len == EOF)
-       break;
-      insize += len;
-    }
-  while (insize < INBUFSIZ);
-  
-  if (insize == 0)
-    {
-      if (eof_ok)
-       return EOF;
-      unzip_read_error();
-    }
-  
-  inptr = 1;
-  return inbuf[0];
-}
-
-static void
-flush_outbuf (void)
-{
-  if (outcnt == 0)
-    return;
-
-  (*unzip_write) ((char *) outbuf, outcnt);
-  outcnt = 0;
-}
-
-static inline int
-bz2_getc (void *stream)
-{
-  return inptr < insize ? inbuf[inptr++] : fill_inbuf (1);
-}
-
-static inline int
-bz2_putc (int c, void *stream)
-{
-  if (outcnt == OUTBUFSIZ)
-    flush_outbuf ();
-  outbuf[outcnt++] = c;
-  return c;
-}
-
-static inline int
-bz2_ferror (void *stream)
-{
-  return 0;
-}
-
-static inline int
-bz2_fflush (void *stream)
-{
-  flush_outbuf ();
-  return 0;
-}
-
-static inline int
-bz2_fclose (void *stream)
-{
-  flush_outbuf ();
-  return 0;
-}
-
-#define fprintf(s, f...)       /**/
-
-
-/*-----------------------------------------------------------*/
-/*--- A block-sorting, lossless compressor        bzip2.c ---*/
-/*-----------------------------------------------------------*/
-
-/*--
-  This program is bzip2, a lossless, block-sorting data compressor,
-  version 0.1pl2, dated 29-Aug-1997.
-
-  Copyright (C) 1996, 1997 by Julian Seward.
-     Guildford, Surrey, UK
-     email: address@hidden
-
-  This program is free software; you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation; either version 2 of the License, or
-  (at your option) any later version.
-
-  This program is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  GNU General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with this program; if not, write to the Free Software
-  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-  The GNU General Public License is contained in the file LICENSE.
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the file ALGORITHMS.
---*/
-
-/*----------------------------------------------------*/
-/*--- IMPORTANT                                    ---*/
-/*----------------------------------------------------*/
-
-/*--
-   WARNING:
-      This program (attempts to) compress data by performing several
-      non-trivial transformations on it.  Unless you are 100% familiar
-      with *all* the algorithms contained herein, and with the
-      consequences of modifying them, you should NOT meddle with the
-      compression or decompression machinery.  Incorrect changes can
-      and very likely *will* lead to disastrous loss of data.
-
-   DISCLAIMER:
-      I TAKE NO RESPONSIBILITY FOR ANY LOSS OF DATA ARISING FROM THE
-      USE OF THIS PROGRAM, HOWSOEVER CAUSED.
-
-      Every compression of a file implies an assumption that the
-      compressed file can be decompressed to reproduce the original.
-      Great efforts in design, coding and testing have been made to
-      ensure that this program works correctly.  However, the
-      complexity of the algorithms, and, in particular, the presence
-      of various special cases in the code which occur with very low
-      but non-zero probability make it impossible to rule out the
-      possibility of bugs remaining in the program.  DO NOT COMPRESS
-      ANY DATA WITH THIS PROGRAM UNLESS YOU ARE PREPARED TO ACCEPT THE
-      POSSIBILITY, HOWEVER SMALL, THAT THE DATA WILL NOT BE RECOVERABLE.
-
-      That is not to say this program is inherently unreliable.
-      Indeed, I very much hope the opposite is true.  bzip2 has been
-      carefully constructed and extensively tested.
-
-   PATENTS:
-      To the best of my knowledge, bzip2 does not use any patented
-      algorithms.  However, I do not have the resources available to
-      carry out a full patent search.  Therefore I cannot give any
-      guarantee of the above statement.
---*/
-
-
-
-/*----------------------------------------------------*/
-/*--- and now for something much more pleasant :-) ---*/
-/*----------------------------------------------------*/
-
-/*---------------------------------------------*/
-/*--
-  Place a 1 beside your platform, and 0 elsewhere.
---*/
-
-/*--
-  Generic 32-bit Unix.
-  Also works on 64-bit Unix boxes.
---*/
-#define BZ_UNIX      1
-
-/*--
-  Win32, as seen by Jacob Navia's excellent
-  port of (Chris Fraser & David Hanson)'s excellent
-  lcc compiler.
---*/
-#define BZ_LCCWIN32  0
-
-
-
-/*---------------------------------------------*/
-/*--
-  Some stuff for all platforms.
---*/
-
-#include <stdio.h>
-#include <stdlib.h>
-#if DEBUG
-  #include <assert.h>
-#endif
-#include <string.h>
-#include <signal.h>
-#include <math.h>
-
-#define ERROR_IF_EOF(i)       { if ((i) == EOF)  ioError(); }
-#define ERROR_IF_NOT_ZERO(i)  { if ((i) != 0)    ioError(); }
-#define ERROR_IF_MINUS_ONE(i) { if ((i) == (-1)) ioError(); }
-
-
-/*---------------------------------------------*/
-/*--
-   Platform-specific stuff.
---*/
-
-#if BZ_UNIX
-   #include <sys/types.h>
-   #include <utime.h>
-   #include <unistd.h>
-   #include <malloc.h>
-   #include <sys/stat.h>
-   #include <sys/times.h>
-
-   #define Int32   int
-   #define UInt32  unsigned int
-   #define Char    char
-   #define UChar   unsigned char
-   #define Int16   short
-   #define UInt16  unsigned short
-
-   #define PATH_SEP    '/'
-   #define MY_LSTAT    lstat
-   #define MY_S_IFREG  S_ISREG
-   #define MY_STAT     stat
-
-   #define APPEND_FILESPEC(root, name) \
-      root=snocString((root), (name))
-
-   #define SET_BINARY_MODE(fd) /**/
-
-   /*--
-      You should try very hard to persuade your C compiler
-      to inline the bits marked INLINE.  Otherwise bzip2 will
-      run rather slowly.  gcc version 2.x is recommended.
-   --*/
-   #ifdef __GNUC__
-      #define INLINE   inline
-      #define NORETURN __attribute__ ((noreturn))
-   #else
-      #define INLINE   /**/
-      #define NORETURN /**/
-   #endif
-#endif
-
-
-
-#if BZ_LCCWIN32
-   #include <io.h>
-   #include <fcntl.h>
-   #include <sys\stat.h>
-
-   #define Int32   int
-   #define UInt32  unsigned int
-   #define Int16   short
-   #define UInt16  unsigned short
-   #define Char    char
-   #define UChar   unsigned char
-
-   #define INLINE         /**/
-   #define NORETURN       /**/
-   #define PATH_SEP       '\\'
-   #define MY_LSTAT       _stat
-   #define MY_STAT        _stat
-   #define MY_S_IFREG(x)  ((x) & _S_IFREG)
-
-   #if 0
-   /*-- lcc-win32 seems to expand wildcards itself --*/
-   #define APPEND_FILESPEC(root, spec)                \
-      do {                                            \
-         if ((spec)[0] == '-') {                      \
-            root = snocString((root), (spec));        \
-         } else {                                     \
-            struct _finddata_t c_file;                \
-            long hFile;                               \
-            hFile = _findfirst((spec), &c_file);      \
-            if ( hFile == -1L ) {                     \
-               root = snocString ((root), (spec));    \
-            } else {                                  \
-               int anInt = 0;                         \
-               while ( anInt == 0 ) {                 \
-                  root = snocString((root),           \
-                            &c_file.name[0]);         \
-                  anInt = _findnext(hFile, &c_file);  \
-               }                                      \
-            }                                         \
-         }                                            \
-      } while ( 0 )
-   #else
-   #define APPEND_FILESPEC(root, name)                \
-      root = snocString ((root), (name))
-   #endif
-
-   #define SET_BINARY_MODE(fd)                        \
-      do {                                            \
-         int retVal = setmode ( fileno ( fd ),        \
-                               O_BINARY );            \
-         ERROR_IF_MINUS_ONE ( retVal );               \
-      } while ( 0 )
-
-#endif
-
-
-/*---------------------------------------------*/
-/*--
-  Some more stuff for all platforms :-)
---*/
-
-#define Bool   unsigned char
-#define True   1
-#define False  0
-
-/*--
-  IntNative is your platform's `native' int size.
-  Only here to avoid probs with 64-bit platforms.
---*/
-#define IntNative int
-
-
-/*--
-   change to 1, or compile with -DDEBUG=1 to debug
---*/
-#ifndef DEBUG
-#define DEBUG 0
-#endif
-
-
-/*---------------------------------------------------*/
-/*---                                             ---*/
-/*---------------------------------------------------*/
-
-/*--
-   Implementation notes, July 1997
-   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-   Memory allocation
-   ~~~~~~~~~~~~~~~~~
-   All large data structures are allocated on the C heap,
-   for better or for worse.  That includes the various
-   arrays of pointers, striped words, bytes, frequency
-   tables and buffers for compression and decompression.
-
-   bzip2 can operate at various block-sizes, ranging from
-   100k to 900k in 100k steps, and it allocates only as
-   much as it needs to.  When compressing, we know from the
-   command-line options what the block-size is going to be,
-   so all allocation can be done at start-up; if that
-   succeeds, there can be no further allocation problems.
-
-   Decompression is more complicated.  Each compressed file
-   contains, in its header, a byte indicating the block
-   size used for compression.  This means bzip2 potentially
-   needs to reallocate memory for each file it deals with,
-   which in turn opens the possibility for a memory allocation
-   failure part way through a run of files, by encountering
-   a file requiring a much larger block size than all the
-   ones preceding it.
-
-   The policy is to simply give up if a memory allocation
-   failure occurs.  During decompression, it would be
-   possible to move on to subsequent files in the hope that
-   some might ask for a smaller block size, but the
-   complications for doing this seem more trouble than they
-   are worth.
-
-
-   Compressed file formats
-   ~~~~~~~~~~~~~~~~~~~~~~~
-   [This is now entirely different from both 0.21, and from
-    any previous Huffman-coded variant of bzip.
-    See the associated file bzip2.txt for details.]
-
-
-   Error conditions
-   ~~~~~~~~~~~~~~~~
-   Dealing with error conditions is the least satisfactory
-   aspect of bzip2.  The policy is to try and leave the
-   filesystem in a consistent state, then quit, even if it
-   means not processing some of the files mentioned in the
-   command line.  `A consistent state' means that a file
-   exists either in its compressed or uncompressed form,
-   but not both.  This boils down to the rule `delete the
-   output file if an error condition occurs, leaving the
-   input intact'.  Input files are only deleted when we can
-   be pretty sure the output file has been written and
-   closed successfully.
-
-   Errors are a dog because there's so many things to
-   deal with.  The following can happen mid-file, and
-   require cleaning up.
-
-     internal `panics' -- indicating a bug
-     corrupted or inconsistent compressed file
-     can't allocate enough memory to decompress this file
-     I/O error reading/writing/opening/closing
-     signal catches -- Control-C, SIGTERM, SIGHUP.
-
-   Other conditions, primarily pertaining to file names,
-   can be checked in-between files, which makes dealing
-   with them easier.
---*/
-
-
-
-/*---------------------------------------------------*/
-/*--- Misc (file handling) data decls             ---*/
-/*---------------------------------------------------*/
-
-static UInt32  bytesIn, bytesOut;
-static Int32   verbosity;
-static Bool    smallMode;
-static UInt32  globalCrc;
-
-
-
-
-static void    panic                 ( Char* );
-static void    ioError               ( void );
-static void    uncompressOutOfMemory ( Int32, Int32 );
-static void    blockOverrun          ( void );
-static void    badBlockHeader        ( void );
-static void    crcError              ( UInt32, UInt32 );
-static void    cleanUpAndFail        ( Int32 );
-static void    compressedStreamEOF   ( void );
-
-
-
-/*---------------------------------------------------*/
-/*--- Data decls for the front end                ---*/
-/*---------------------------------------------------*/
-
-/*--
-   The overshoot bytes allow us to avoid most of
-   the cost of pointer renormalisation during
-   comparison of rotations in sorting.
-   The figure of 20 is derived as follows:
-      qSort3 allows an overshoot of up to 10.
-      It then calls simpleSort, which calls
-      fullGtU, also with max overshoot 10.
-      fullGtU does up to 10 comparisons without
-      renormalising, giving 10+10 == 20.
---*/
-#define NUM_OVERSHOOT_BYTES 20
-
-/*--
-  These are the main data structures for
-  the Burrows-Wheeler transform.
---*/
-
-/*--
-  Pointers to compression and decompression
-  structures.  Set by
-     allocateCompressStructures   and
-     setDecompressStructureSizes
-
-  The structures are always set to be suitable
-  for a block of size 100000 * blockSize100k.
---*/
-static UInt16   *ll16;     /*-- small decompress --*/
-static UChar    *ll4;      /*-- small decompress --*/
-
-static Int32    *tt;       /*-- fast decompress  --*/
-static UChar    *ll8;      /*-- fast decompress  --*/
-
-
-/*--
-  freq table collected to save a pass over the data
-  during decompression.
---*/
-static Int32   unzftab[256];
-
-
-/*--
-   index of the last char in the block, so
-   the block size == last + 1.
---*/
-static Int32  last;
-
-
-/*--
-  index in zptr[] of original string after sorting.
---*/
-static Int32  origPtr;
-
-
-/*--
-  always: in the range 0 .. 9.
-  The current block size is 100000 * this number.
---*/
-static Int32  blockSize100k;
-
-
-/*--
-  Used when sorting.  If too many long comparisons
-  happen, we stop sorting, randomise the block 
-  slightly, and try again.
---*/
-
-static Bool   blockRandomised;
-
-
-
-/*---------------------------------------------------*/
-/*--- Data decls for the back end                 ---*/
-/*---------------------------------------------------*/
-
-#define MAX_ALPHA_SIZE 258
-#define MAX_CODE_LEN    23
-
-#define RUNA 0
-#define RUNB 1
-
-#define N_GROUPS 6
-#define G_SIZE   50
-#define N_ITERS  4
-
-#define MAX_SELECTORS (2 + (900000 / G_SIZE))
-
-static Bool  inUse[256];
-static Int32 nInUse;
-
-static UChar seqToUnseq[256];
-static UChar unseqToSeq[256];
-
-static UChar selector   [MAX_SELECTORS];
-static UChar selectorMtf[MAX_SELECTORS];
-
-static UChar len  [N_GROUPS][MAX_ALPHA_SIZE];
-
-/*-- decompress only --*/
-static Int32 limit  [N_GROUPS][MAX_ALPHA_SIZE];
-static Int32 base   [N_GROUPS][MAX_ALPHA_SIZE];
-static Int32 perm   [N_GROUPS][MAX_ALPHA_SIZE];
-static Int32 minLens[N_GROUPS];
-
-
-/*---------------------------------------------------*/
-/*--- 32-bit CRC grunge                           ---*/
-/*---------------------------------------------------*/
-
-/*--
-  I think this is an implementation of the AUTODIN-II,
-  Ethernet & FDDI 32-bit CRC standard.  Vaguely derived
-  from code by Rob Warnock, in Section 51 of the
-  comp.compression FAQ.
---*/
-
-static UInt32 crc32Table[256] = {
-
-   /*-- Ugly, innit? --*/
-
-   0x00000000UL, 0x04c11db7UL, 0x09823b6eUL, 0x0d4326d9UL,
-   0x130476dcUL, 0x17c56b6bUL, 0x1a864db2UL, 0x1e475005UL,
-   0x2608edb8UL, 0x22c9f00fUL, 0x2f8ad6d6UL, 0x2b4bcb61UL,
-   0x350c9b64UL, 0x31cd86d3UL, 0x3c8ea00aUL, 0x384fbdbdUL,
-   0x4c11db70UL, 0x48d0c6c7UL, 0x4593e01eUL, 0x4152fda9UL,
-   0x5f15adacUL, 0x5bd4b01bUL, 0x569796c2UL, 0x52568b75UL,
-   0x6a1936c8UL, 0x6ed82b7fUL, 0x639b0da6UL, 0x675a1011UL,
-   0x791d4014UL, 0x7ddc5da3UL, 0x709f7b7aUL, 0x745e66cdUL,
-   0x9823b6e0UL, 0x9ce2ab57UL, 0x91a18d8eUL, 0x95609039UL,
-   0x8b27c03cUL, 0x8fe6dd8bUL, 0x82a5fb52UL, 0x8664e6e5UL,
-   0xbe2b5b58UL, 0xbaea46efUL, 0xb7a96036UL, 0xb3687d81UL,
-   0xad2f2d84UL, 0xa9ee3033UL, 0xa4ad16eaUL, 0xa06c0b5dUL,
-   0xd4326d90UL, 0xd0f37027UL, 0xddb056feUL, 0xd9714b49UL,
-   0xc7361b4cUL, 0xc3f706fbUL, 0xceb42022UL, 0xca753d95UL,
-   0xf23a8028UL, 0xf6fb9d9fUL, 0xfbb8bb46UL, 0xff79a6f1UL,
-   0xe13ef6f4UL, 0xe5ffeb43UL, 0xe8bccd9aUL, 0xec7dd02dUL,
-   0x34867077UL, 0x30476dc0UL, 0x3d044b19UL, 0x39c556aeUL,
-   0x278206abUL, 0x23431b1cUL, 0x2e003dc5UL, 0x2ac12072UL,
-   0x128e9dcfUL, 0x164f8078UL, 0x1b0ca6a1UL, 0x1fcdbb16UL,
-   0x018aeb13UL, 0x054bf6a4UL, 0x0808d07dUL, 0x0cc9cdcaUL,
-   0x7897ab07UL, 0x7c56b6b0UL, 0x71159069UL, 0x75d48ddeUL,
-   0x6b93dddbUL, 0x6f52c06cUL, 0x6211e6b5UL, 0x66d0fb02UL,
-   0x5e9f46bfUL, 0x5a5e5b08UL, 0x571d7dd1UL, 0x53dc6066UL,
-   0x4d9b3063UL, 0x495a2dd4UL, 0x44190b0dUL, 0x40d816baUL,
-   0xaca5c697UL, 0xa864db20UL, 0xa527fdf9UL, 0xa1e6e04eUL,
-   0xbfa1b04bUL, 0xbb60adfcUL, 0xb6238b25UL, 0xb2e29692UL,
-   0x8aad2b2fUL, 0x8e6c3698UL, 0x832f1041UL, 0x87ee0df6UL,
-   0x99a95df3UL, 0x9d684044UL, 0x902b669dUL, 0x94ea7b2aUL,
-   0xe0b41de7UL, 0xe4750050UL, 0xe9362689UL, 0xedf73b3eUL,
-   0xf3b06b3bUL, 0xf771768cUL, 0xfa325055UL, 0xfef34de2UL,
-   0xc6bcf05fUL, 0xc27dede8UL, 0xcf3ecb31UL, 0xcbffd686UL,
-   0xd5b88683UL, 0xd1799b34UL, 0xdc3abdedUL, 0xd8fba05aUL,
-   0x690ce0eeUL, 0x6dcdfd59UL, 0x608edb80UL, 0x644fc637UL,
-   0x7a089632UL, 0x7ec98b85UL, 0x738aad5cUL, 0x774bb0ebUL,
-   0x4f040d56UL, 0x4bc510e1UL, 0x46863638UL, 0x42472b8fUL,
-   0x5c007b8aUL, 0x58c1663dUL, 0x558240e4UL, 0x51435d53UL,
-   0x251d3b9eUL, 0x21dc2629UL, 0x2c9f00f0UL, 0x285e1d47UL,
-   0x36194d42UL, 0x32d850f5UL, 0x3f9b762cUL, 0x3b5a6b9bUL,
-   0x0315d626UL, 0x07d4cb91UL, 0x0a97ed48UL, 0x0e56f0ffUL,
-   0x1011a0faUL, 0x14d0bd4dUL, 0x19939b94UL, 0x1d528623UL,
-   0xf12f560eUL, 0xf5ee4bb9UL, 0xf8ad6d60UL, 0xfc6c70d7UL,
-   0xe22b20d2UL, 0xe6ea3d65UL, 0xeba91bbcUL, 0xef68060bUL,
-   0xd727bbb6UL, 0xd3e6a601UL, 0xdea580d8UL, 0xda649d6fUL,
-   0xc423cd6aUL, 0xc0e2d0ddUL, 0xcda1f604UL, 0xc960ebb3UL,
-   0xbd3e8d7eUL, 0xb9ff90c9UL, 0xb4bcb610UL, 0xb07daba7UL,
-   0xae3afba2UL, 0xaafbe615UL, 0xa7b8c0ccUL, 0xa379dd7bUL,
-   0x9b3660c6UL, 0x9ff77d71UL, 0x92b45ba8UL, 0x9675461fUL,
-   0x8832161aUL, 0x8cf30badUL, 0x81b02d74UL, 0x857130c3UL,
-   0x5d8a9099UL, 0x594b8d2eUL, 0x5408abf7UL, 0x50c9b640UL,
-   0x4e8ee645UL, 0x4a4ffbf2UL, 0x470cdd2bUL, 0x43cdc09cUL,
-   0x7b827d21UL, 0x7f436096UL, 0x7200464fUL, 0x76c15bf8UL,
-   0x68860bfdUL, 0x6c47164aUL, 0x61043093UL, 0x65c52d24UL,
-   0x119b4be9UL, 0x155a565eUL, 0x18197087UL, 0x1cd86d30UL,
-   0x029f3d35UL, 0x065e2082UL, 0x0b1d065bUL, 0x0fdc1becUL,
-   0x3793a651UL, 0x3352bbe6UL, 0x3e119d3fUL, 0x3ad08088UL,
-   0x2497d08dUL, 0x2056cd3aUL, 0x2d15ebe3UL, 0x29d4f654UL,
-   0xc5a92679UL, 0xc1683bceUL, 0xcc2b1d17UL, 0xc8ea00a0UL,
-   0xd6ad50a5UL, 0xd26c4d12UL, 0xdf2f6bcbUL, 0xdbee767cUL,
-   0xe3a1cbc1UL, 0xe760d676UL, 0xea23f0afUL, 0xeee2ed18UL,
-   0xf0a5bd1dUL, 0xf464a0aaUL, 0xf9278673UL, 0xfde69bc4UL,
-   0x89b8fd09UL, 0x8d79e0beUL, 0x803ac667UL, 0x84fbdbd0UL,
-   0x9abc8bd5UL, 0x9e7d9662UL, 0x933eb0bbUL, 0x97ffad0cUL,
-   0xafb010b1UL, 0xab710d06UL, 0xa6322bdfUL, 0xa2f33668UL,
-   0xbcb4666dUL, 0xb8757bdaUL, 0xb5365d03UL, 0xb1f740b4UL
-};
-
-
-/*---------------------------------------------*/
-
-static void initialiseCRC ( void )
-{
-   globalCrc = 0xffffffffUL;
-}
-
-
-/*---------------------------------------------*/
-
-static UInt32 getFinalCRC ( void )
-{
-   return ~globalCrc;
-}
-
-
-/*---------------------------------------------*/
-
-static UInt32 getGlobalCRC ( void )
-{
-   return globalCrc;
-}
-
-
-/*---------------------------------------------*/
-
-static void setGlobalCRC ( UInt32 newCrc )
-{
-   globalCrc = newCrc;
-}
-
-
-/*---------------------------------------------*/
-
-#define UPDATE_CRC(crcVar,cha)              \
-{                                           \
-   crcVar = (crcVar << 8) ^                 \
-            crc32Table[(crcVar >> 24) ^     \
-                       ((UChar)cha)];       \
-}
-
-
-/*---------------------------------------------------*/
-/*--- Bit stream I/O                              ---*/
-/*---------------------------------------------------*/
-
-
-static UInt32 bsBuff;
-static Int32  bsLive;
-static void*  bsStream;
-static Bool   bsWriting;
-
-
-/*---------------------------------------------*/
-
-static void bsSetStream ( void* f, Bool wr )
-{
-   if (bsStream != NULL) panic ( "bsSetStream" );
-   bsStream = f;
-   bsLive = 0;
-   bsBuff = 0;
-   bytesOut = 0;
-   bytesIn = 0;
-   bsWriting = wr;
-}
-
-
-/*---------------------------------------------*/
-
-static void bsFinishedWithStream ( void )
-{
-   if (bsWriting)
-      while (bsLive > 0) {
-         bz2_putc ( (UChar)(bsBuff >> 24), bsStream );
-         bsBuff <<= 8;
-         bsLive -= 8;
-         bytesOut++;
-      }
-   bsStream = NULL;
-}
-
-
-/*---------------------------------------------*/
-
-#define bsNEEDR(nz)                           \
-{                                             \
-   while (bsLive < nz) {                      \
-      Int32 zzi = bz2_getc ( bsStream );      \
-      if (zzi == EOF) compressedStreamEOF();  \
-      bsBuff = (bsBuff << 8) | (zzi & 0xffL); \
-      bsLive += 8;                            \
-   }                                          \
-}
-
-
-/*---------------------------------------------*/
-
-#define bsR1(vz)                              \
-{                                             \
-   bsNEEDR(1);                                \
-   vz = (bsBuff >> (bsLive-1)) & 1;           \
-   bsLive--;                                  \
-}
-
-
-/*---------------------------------------------*/
-
-static INLINE UInt32 bsR ( Int32 n )
-{
-   UInt32 v;
-   bsNEEDR ( n );
-   v = (bsBuff >> (bsLive-n)) & ((1 << n)-1);
-   bsLive -= n;
-   return v;
-}
-
-
-/*---------------------------------------------*/
-
-static UChar bsGetUChar ( void )
-{
-   return (UChar)bsR(8);
-}
-
-
-
-/*---------------------------------------------*/
-
-static Int32 bsGetUInt32 ( void )
-{
-   UInt32 u;
-   u = 0;
-   u = (u << 8) | bsR(8);
-   u = (u << 8) | bsR(8);
-   u = (u << 8) | bsR(8);
-   u = (u << 8) | bsR(8);
-   return u;
-}
-
-
-/*---------------------------------------------*/
-
-static UInt32 bsGetIntVS ( UInt32 numBits )
-{
-   return (UInt32)bsR(numBits);
-}
-
-
-
-/*---------------------------------------------------*/
-/*--- Huffman coding low-level stuff              ---*/
-/*---------------------------------------------------*/
-
-
-/*---------------------------------------------*/
-
-static void hbCreateDecodeTables ( Int32 *limit,
-                                  Int32 *base,
-                                  Int32 *perm,
-                                  UChar *length,
-                                  Int32 minLen,
-                                  Int32 maxLen,
-                                  Int32 alphaSize )
-{
-   Int32 pp, i, j, vec;
-
-   pp = 0;
-   for (i = minLen; i <= maxLen; i++)
-      for (j = 0; j < alphaSize; j++)
-         if (length[j] == i) { perm[pp] = j; pp++; };
-
-   for (i = 0; i < MAX_CODE_LEN; i++) base[i] = 0;
-   for (i = 0; i < alphaSize; i++) base[length[i]+1]++;
-
-   for (i = 1; i < MAX_CODE_LEN; i++) base[i] += base[i-1];
-
-   for (i = 0; i < MAX_CODE_LEN; i++) limit[i] = 0;
-   vec = 0;
-
-   for (i = minLen; i <= maxLen; i++) {
-      vec += (base[i+1] - base[i]);
-      limit[i] = vec-1;
-      vec <<= 1;
-   }
-   for (i = minLen + 1; i <= maxLen; i++)
-      base[i] = ((limit[i-1] + 1) << 1) - base[i];
-}
-
-
-
-/*---------------------------------------------------*/
-/*--- Undoing the reversible transformation       ---*/
-/*---------------------------------------------------*/
-
-/*---------------------------------------------*/
-
-#define SET_LL4(i,n)                                          \
-   { if (((i) & 0x1) == 0)                                    \
-        ll4[(i) >> 1] = (ll4[(i) >> 1] & 0xf0) | (n); else    \
-        ll4[(i) >> 1] = (ll4[(i) >> 1] & 0x0f) | ((n) << 4);  \
-   }
-
-
-#define GET_LL4(i)                             \
-    (((UInt32)(ll4[(i) >> 1])) >> (((i) << 2) & 0x4) & 0xF)
-
-
-#define SET_LL(i,n)                       \
-   { ll16[i] = (UInt16)(n & 0x0000ffff);  \
-     SET_LL4(i, n >> 16);                 \
-   }
-
-
-#define GET_LL(i) \
-   (((UInt32)ll16[i]) | (GET_LL4(i) << 16))
-
-
-/*---------------------------------------------*/
-/*--
-  Manage memory for compression/decompression.
-  When compressing, a single block size applies to
-  all files processed, and that's set when the
-  program starts.  But when decompressing, each file
-  processed could have been compressed with a
-  different block size, so we may have to free
-  and reallocate on a per-file basis.
-
-  A call with argument of zero means
-  `free up everything.'  And a value of zero for
-  blockSize100k means no memory is currently allocated.
---*/
-
-
-/*---------------------------------------------*/
-
-static void setDecompressStructureSizes ( Int32 newSize100k )
-{
-   if (! (0 <= newSize100k   && newSize100k   <= 9 &&
-          0 <= blockSize100k && blockSize100k <= 9))
-      panic ( "setDecompressStructureSizes" );
-
-   if (newSize100k == blockSize100k) return;
-
-   blockSize100k = newSize100k;
-
-   if (ll16  != NULL) free ( ll16  );
-   if (ll4   != NULL) free ( ll4   );
-   if (ll8   != NULL) free ( ll8   );
-   if (tt    != NULL) free ( tt    );
-
-   if (newSize100k == 0) return;
-
-   if (smallMode) {
-
-      Int32 n = 100000 * newSize100k;
-      ll16    = malloc ( n * sizeof(UInt16) );
-      ll4     = malloc ( ((n+1) >> 1) * sizeof(UChar) );
-
-      if (ll4 == NULL || ll16 == NULL) {
-         Int32 totalDraw
-            = n * sizeof(Int16) + ((n+1) >> 1) * sizeof(UChar);
-         uncompressOutOfMemory ( totalDraw, n );
-      }
-
-   } else {
-
-      Int32 n = 100000 * newSize100k;
-      ll8     = malloc ( n * sizeof(UChar) );
-      tt      = malloc ( n * sizeof(Int32) );
-
-      if (ll8 == NULL || tt == NULL) {
-         Int32 totalDraw
-            = n * sizeof(UChar) + n * sizeof(UInt32);
-         uncompressOutOfMemory ( totalDraw, n );
-      }
-
-   }
-}
-
-
-
-/*---------------------------------------------------*/
-/*--- The new back end                            ---*/
-/*---------------------------------------------------*/
-
-/*---------------------------------------------*/
-
-static void makeMaps ( void )
-{
-   Int32 i;
-   nInUse = 0;
-   for (i = 0; i < 256; i++)
-      if (inUse[i]) {
-         seqToUnseq[nInUse] = i;
-         unseqToSeq[i] = nInUse;
-         nInUse++;
-      }
-}
-
-
-
-/*---------------------------------------------*/
-
-static void recvDecodingTables ( void )
-{
-   Int32 i, j, t, nGroups, nSelectors, alphaSize;
-   Int32 minLen, maxLen;
-   Bool inUse16[16];
-
-   /*--- Receive the mapping table ---*/
-   for (i = 0; i < 16; i++)
-      if (bsR(1) == 1) 
-         inUse16[i] = True; else 
-         inUse16[i] = False;
-
-   for (i = 0; i < 256; i++) inUse[i] = False;
-
-   for (i = 0; i < 16; i++)
-      if (inUse16[i])
-         for (j = 0; j < 16; j++)
-            if (bsR(1) == 1) inUse[i * 16 + j] = True;
-
-   makeMaps();
-   alphaSize = nInUse+2;
-
-   /*--- Now the selectors ---*/
-   nGroups = bsR ( 3 );
-   nSelectors = bsR ( 15 );
-   for (i = 0; i < nSelectors; i++) {
-      j = 0;
-      while (bsR(1) == 1) j++;
-      selectorMtf[i] = j;
-   }
-
-   /*--- Undo the MTF values for the selectors. ---*/
-   {
-      UChar pos[N_GROUPS], tmp, v;
-      for (v = 0; v < nGroups; v++) pos[v] = v;
-   
-      for (i = 0; i < nSelectors; i++) {
-         v = selectorMtf[i];
-         tmp = pos[v];
-         while (v > 0) { pos[v] = pos[v-1]; v--; }
-         pos[0] = tmp;
-         selector[i] = tmp;
-      }
-   }
-
-   /*--- Now the coding tables ---*/
-   for (t = 0; t < nGroups; t++) {
-      Int32 curr = bsR ( 5 );
-      for (i = 0; i < alphaSize; i++) {
-         while (bsR(1) == 1) {
-            if (bsR(1) == 0) curr++; else curr--;
-         }
-         len[t][i] = curr;
-      }
-   }
-
-   /*--- Create the Huffman decoding tables ---*/
-   for (t = 0; t < nGroups; t++) {
-      minLen = 32;
-      maxLen = 0;
-      for (i = 0; i < alphaSize; i++) {
-         if (len[t][i] > maxLen) maxLen = len[t][i];
-         if (len[t][i] < minLen) minLen = len[t][i];
-      }
-      hbCreateDecodeTables ( 
-         &limit[t][0], &base[t][0], &perm[t][0], &len[t][0],
-         minLen, maxLen, alphaSize
-      );
-      minLens[t] = minLen;
-   }
-}
-
-
-/*---------------------------------------------*/
-
-#define GET_MTF_VAL(lval)                 \
-{                                         \
-   Int32 zt, zn, zvec, zj;                \
-   if (groupPos == 0) {                   \
-      groupNo++;                          \
-      groupPos = G_SIZE;                  \
-   }                                      \
-   groupPos--;                            \
-   zt = selector[groupNo];                \
-   zn = minLens[zt];                      \
-   zvec = bsR ( zn );                     \
-   while (zvec > limit[zt][zn]) {         \
-      zn++; bsR1(zj);                     \
-      zvec = (zvec << 1) | zj;            \
-   };                                     \
-   lval = perm[zt][zvec - base[zt][zn]];  \
-}
-
-
-/*---------------------------------------------*/
-
-static void getAndMoveToFrontDecode ( void )
-{
-   UChar  yy[256];
-   Int32  i, j, nextSym, limitLast;
-   Int32  EOB, groupNo, groupPos;
-
-   limitLast = 100000 * blockSize100k;
-   origPtr   = bsGetIntVS ( 24 );
-
-   recvDecodingTables();
-   EOB      = nInUse+1;
-   groupNo  = -1;
-   groupPos = 0;
-
-   /*--
-      Setting up the unzftab entries here is not strictly
-      necessary, but it does save having to do it later
-      in a separate pass, and so saves a block's worth of
-      cache misses.
-   --*/
-   for (i = 0; i <= 255; i++) unzftab[i] = 0;
-
-   for (i = 0; i <= 255; i++) yy[i] = (UChar) i;
-
-   last = -1;
-
-   GET_MTF_VAL(nextSym);
-
-   while (True) {
-
-      if (nextSym == EOB) break;
-
-      if (nextSym == RUNA || nextSym == RUNB) {
-         UChar ch;
-         Int32 s = -1;
-         Int32 N = 1;
-         do {
-            if (nextSym == RUNA) s = s + (0+1) * N; else
-            if (nextSym == RUNB) s = s + (1+1) * N;
-            N = N * 2;
-            GET_MTF_VAL(nextSym);
-         }
-            while (nextSym == RUNA || nextSym == RUNB);
-
-         s++;
-         ch = seqToUnseq[yy[0]];
-         unzftab[ch] += s;
-
-         if (smallMode)
-            while (s > 0) {
-               last++; 
-               ll16[last] = ch;
-               s--;
-            }
-         else
-            while (s > 0) {
-               last++;
-               ll8[last] = ch;
-               s--;
-            };
-
-         if (last >= limitLast) blockOverrun();
-         continue;
-
-      } else {
-
-         UChar tmp;
-         last++; if (last >= limitLast) blockOverrun();
-
-         tmp = yy[nextSym-1];
-         unzftab[seqToUnseq[tmp]]++;
-         if (smallMode)
-            ll16[last] = seqToUnseq[tmp]; else
-            ll8[last]  = seqToUnseq[tmp];
-
-         /*--
-            This loop is hammered during decompression,
-            hence the unrolling.
-
-            for (j = nextSym-1; j > 0; j--) yy[j] = yy[j-1];
-         --*/
-
-         j = nextSym-1;
-         for (; j > 3; j -= 4) {
-            yy[j]   = yy[j-1];
-            yy[j-1] = yy[j-2];
-            yy[j-2] = yy[j-3];
-            yy[j-3] = yy[j-4];
-         }
-         for (; j > 0; j--) yy[j] = yy[j-1];
-
-         yy[0] = tmp;
-         GET_MTF_VAL(nextSym);
-         continue;
-      }
-   }
-}
-
-
-/*---------------------------------------------------*/
-/*--- Stuff for randomising repetitive blocks     ---*/
-/*---------------------------------------------------*/
-
-/*---------------------------------------------*/
-static Int32 rNums[512] = { 
-   619, 720, 127, 481, 931, 816, 813, 233, 566, 247, 
-   985, 724, 205, 454, 863, 491, 741, 242, 949, 214, 
-   733, 859, 335, 708, 621, 574, 73, 654, 730, 472, 
-   419, 436, 278, 496, 867, 210, 399, 680, 480, 51, 
-   878, 465, 811, 169, 869, 675, 611, 697, 867, 561, 
-   862, 687, 507, 283, 482, 129, 807, 591, 733, 623, 
-   150, 238, 59, 379, 684, 877, 625, 169, 643, 105, 
-   170, 607, 520, 932, 727, 476, 693, 425, 174, 647, 
-   73, 122, 335, 530, 442, 853, 695, 249, 445, 515, 
-   909, 545, 703, 919, 874, 474, 882, 500, 594, 612, 
-   641, 801, 220, 162, 819, 984, 589, 513, 495, 799, 
-   161, 604, 958, 533, 221, 400, 386, 867, 600, 782, 
-   382, 596, 414, 171, 516, 375, 682, 485, 911, 276, 
-   98, 553, 163, 354, 666, 933, 424, 341, 533, 870, 
-   227, 730, 475, 186, 263, 647, 537, 686, 600, 224, 
-   469, 68, 770, 919, 190, 373, 294, 822, 808, 206, 
-   184, 943, 795, 384, 383, 461, 404, 758, 839, 887, 
-   715, 67, 618, 276, 204, 918, 873, 777, 604, 560, 
-   951, 160, 578, 722, 79, 804, 96, 409, 713, 940, 
-   652, 934, 970, 447, 318, 353, 859, 672, 112, 785, 
-   645, 863, 803, 350, 139, 93, 354, 99, 820, 908, 
-   609, 772, 154, 274, 580, 184, 79, 626, 630, 742, 
-   653, 282, 762, 623, 680, 81, 927, 626, 789, 125, 
-   411, 521, 938, 300, 821, 78, 343, 175, 128, 250, 
-   170, 774, 972, 275, 999, 639, 495, 78, 352, 126, 
-   857, 956, 358, 619, 580, 124, 737, 594, 701, 612, 
-   669, 112, 134, 694, 363, 992, 809, 743, 168, 974, 
-   944, 375, 748, 52, 600, 747, 642, 182, 862, 81, 
-   344, 805, 988, 739, 511, 655, 814, 334, 249, 515, 
-   897, 955, 664, 981, 649, 113, 974, 459, 893, 228, 
-   433, 837, 553, 268, 926, 240, 102, 654, 459, 51, 
-   686, 754, 806, 760, 493, 403, 415, 394, 687, 700, 
-   946, 670, 656, 610, 738, 392, 760, 799, 887, 653, 
-   978, 321, 576, 617, 626, 502, 894, 679, 243, 440, 
-   680, 879, 194, 572, 640, 724, 926, 56, 204, 700, 
-   707, 151, 457, 449, 797, 195, 791, 558, 945, 679, 
-   297, 59, 87, 824, 713, 663, 412, 693, 342, 606, 
-   134, 108, 571, 364, 631, 212, 174, 643, 304, 329, 
-   343, 97, 430, 751, 497, 314, 983, 374, 822, 928, 
-   140, 206, 73, 263, 980, 736, 876, 478, 430, 305, 
-   170, 514, 364, 692, 829, 82, 855, 953, 676, 246, 
-   369, 970, 294, 750, 807, 827, 150, 790, 288, 923, 
-   804, 378, 215, 828, 592, 281, 565, 555, 710, 82, 
-   896, 831, 547, 261, 524, 462, 293, 465, 502, 56, 
-   661, 821, 976, 991, 658, 869, 905, 758, 745, 193, 
-   768, 550, 608, 933, 378, 286, 215, 979, 792, 961, 
-   61, 688, 793, 644, 986, 403, 106, 366, 905, 644, 
-   372, 567, 466, 434, 645, 210, 389, 550, 919, 135, 
-   780, 773, 635, 389, 707, 100, 626, 958, 165, 504, 
-   920, 176, 193, 713, 857, 265, 203, 50, 668, 108, 
-   645, 990, 626, 197, 510, 357, 358, 850, 858, 364, 
-   936, 638
-};
-
-
-#define RAND_DECLS                                \
-   Int32 rNToGo = 0;                              \
-   Int32 rTPos  = 0;                              \
-
-#define RAND_MASK ((rNToGo == 1) ? 1 : 0)
-
-#define RAND_UPD_MASK                             \
-   if (rNToGo == 0) {                             \
-      rNToGo = rNums[rTPos];                      \
-      rTPos++; if (rTPos == 512) rTPos = 0;       \
-   }                                              \
-   rNToGo--;
-
-
-
-/*---------------------------------------------------*/
-/*--- The Reversible Transformation (tm)          ---*/
-/*---------------------------------------------------*/
-
-/*---------------------------------------------*/
-
-
-static INLINE Int32 indexIntoF ( Int32 indx, Int32 *cftab )
-{
-   Int32 nb, na, mid;
-   nb = 0;
-   na = 256;
-   do {
-      mid = (nb + na) >> 1;
-      if (indx >= cftab[mid]) nb = mid; else na = mid;
-   }
-   while (na - nb != 1);
-   return nb;
-}
-
-
-
-#define GET_SMALL(cccc)                     \
-                                            \
-      cccc = indexIntoF ( tPos, cftab );    \
-      tPos = GET_LL(tPos);
-
-
-
-static void undoReversibleTransformation_small ( void* dst )
-{
-   Int32  cftab[257], cftabAlso[257];
-   Int32  i, j, tmp, tPos;
-   UChar  ch;
-
-   /*--
-      We assume here that the global array unzftab will
-      already be holding the frequency counts for
-      ll8[0 .. last].
-   --*/
-
-   /*-- Set up cftab to facilitate generation of indexIntoF --*/
-   cftab[0] = 0;
-   for (i = 1; i <= 256; i++) cftab[i] = unzftab[i-1];
-   for (i = 1; i <= 256; i++) cftab[i] += cftab[i-1];
-
-   /*-- Make a copy of it, used in generation of T --*/
-   for (i = 0; i <= 256; i++) cftabAlso[i] = cftab[i];
-
-   /*-- compute the T vector --*/
-   for (i = 0; i <= last; i++) {
-      ch = (UChar)ll16[i];
-      SET_LL(i, cftabAlso[ch]);
-      cftabAlso[ch]++;
-   }
-
-   /*--
-      Compute T^(-1) by pointer reversal on T.  This is rather
-      subtle, in that, if the original block was two or more
-      (in general, N) concatenated copies of the same thing,
-      the T vector will consist of N cycles, each of length
-      blocksize / N, and decoding will involve traversing one
-      of these cycles N times.  Which particular cycle doesn't
-      matter -- they are all equivalent.  The tricky part is to
-      make sure that the pointer reversal creates a correct
-      reversed cycle for us to traverse.  So, the code below
-      simply reverses whatever cycle origPtr happens to fall into,
-      without regard to the cycle length.  That gives one reversed
-      cycle, which for normal blocks, is the entire block-size long.
-      For repeated blocks, it will be interspersed with the other
-      N-1 non-reversed cycles.  Providing that the F-subscripting
-      phase which follows starts at origPtr, all then works ok.
-   --*/
-   i = origPtr;
-   j = GET_LL(i);
-   do {
-      tmp = GET_LL(j);
-      SET_LL(j, i);
-      i = j;
-      j = tmp;
-   }
-      while (i != origPtr);
-
-   /*--
-      We recreate the original by subscripting F through T^(-1).
-      The run-length-decoder below requires characters incrementally,
-      so tPos is set to a starting value, and is updated by
-      the GET_SMALL macro.
-   --*/
-   tPos   = origPtr;
-
-   /*-------------------------------------------------*/
-   /*--
-      This is pretty much a verbatim copy of the
-      run-length decoder present in the distribution
-      bzip-0.21; it has to be here to avoid creating
-      block[] as an intermediary structure.  As in 0.21,
-      this code derives from some sent to me by
-      Christian von Roques.
-
-      It allows dst==NULL, so as to support the test (-t)
-      option without slowing down the fast decompression
-      code.
-   --*/
-   {
-      IntNative retVal;
-      Int32     i2, count, chPrev, ch2;
-      UInt32    localCrc;
-
-      count    = 0;
-      i2       = 0;
-      ch2      = 256;   /*-- not a char and not EOF --*/
-      localCrc = getGlobalCRC();
-
-      {
-         RAND_DECLS;
-         while ( i2 <= last ) {
-            chPrev = ch2;
-            GET_SMALL(ch2);
-            if (blockRandomised) {
-               RAND_UPD_MASK;
-               ch2 ^= (UInt32)RAND_MASK;
-            }
-            i2++;
-   
-            if (dst)
-               retVal = bz2_putc ( ch2, dst );
-   
-            UPDATE_CRC ( localCrc, (UChar)ch2 );
-   
-            if (ch2 != chPrev) {
-               count = 1;
-            } else {
-               count++;
-               if (count >= 4) {
-                  Int32 j2;
-                  UChar z;
-                  GET_SMALL(z);
-                  if (blockRandomised) {
-                     RAND_UPD_MASK;
-                     z ^= RAND_MASK;
-                  }
-                  for (j2 = 0;  j2 < (Int32)z;  j2++) {
-                     if (dst) retVal = bz2_putc (ch2, dst);
-                     UPDATE_CRC ( localCrc, (UChar)ch2 );
-                  }
-                  i2++;
-                  count = 0;
-               }
-            }
-         }
-      }
-
-      setGlobalCRC ( localCrc );
-   }
-   /*-- end of the in-line run-length-decoder. --*/
-}
-#undef GET_SMALL
-
-
-/*---------------------------------------------*/
-
-#define GET_FAST(cccc)                       \
-                                             \
-      cccc = ll8[tPos];                      \
-      tPos = tt[tPos];
-
-
-
-static void undoReversibleTransformation_fast ( void* dst )
-{
-   Int32  cftab[257];
-   Int32  i, tPos;
-   UChar  ch;
-
-   /*--
-      We assume here that the global array unzftab will
-      already be holding the frequency counts for
-      ll8[0 .. last].
-   --*/
-
-   /*-- Set up cftab to facilitate generation of T^(-1) --*/
-   cftab[0] = 0;
-   for (i = 1; i <= 256; i++) cftab[i] = unzftab[i-1];
-   for (i = 1; i <= 256; i++) cftab[i] += cftab[i-1];
-
-   /*-- compute the T^(-1) vector --*/
-   for (i = 0; i <= last; i++) {
-      ch = (UChar)ll8[i];
-      tt[cftab[ch]] = i;
-      cftab[ch]++;
-   }
-
-   /*--
-      We recreate the original by subscripting L through T^(-1).
-      The run-length-decoder below requires characters incrementally,
-      so tPos is set to a starting value, and is updated by
-      the GET_FAST macro.
-   --*/
-   tPos   = tt[origPtr];
-
-   /*-------------------------------------------------*/
-   /*--
-      This is pretty much a verbatim copy of the
-      run-length decoder present in the distribution
-      bzip-0.21; it has to be here to avoid creating
-      block[] as an intermediary structure.  As in 0.21,
-      this code derives from some sent to me by
-      Christian von Roques.
-   --*/
-   {
-      IntNative retVal;
-      Int32     i2, count, chPrev, ch2;
-      UInt32    localCrc;
-
-      count    = 0;
-      i2       = 0;
-      ch2      = 256;   /*-- not a char and not EOF --*/
-      localCrc = getGlobalCRC();
-
-      if (blockRandomised) {
-         RAND_DECLS;
-         while ( i2 <= last ) {
-            chPrev = ch2;
-            GET_FAST(ch2);
-            RAND_UPD_MASK;
-            ch2 ^= (UInt32)RAND_MASK;
-            i2++;
-   
-            retVal = bz2_putc ( ch2, dst );
-            UPDATE_CRC ( localCrc, (UChar)ch2 );
-   
-            if (ch2 != chPrev) {
-               count = 1;
-            } else {
-               count++;
-               if (count >= 4) {
-                  Int32 j2;
-                  UChar z;
-                  GET_FAST(z);
-                  RAND_UPD_MASK;
-                  z ^= RAND_MASK;
-                  for (j2 = 0;  j2 < (Int32)z;  j2++) {
-                     retVal = bz2_putc (ch2, dst);
-                     UPDATE_CRC ( localCrc, (UChar)ch2 );
-                  }
-                  i2++;
-                  count = 0;
-               }
-            }
-         }
-
-      } else {
-
-         while ( i2 <= last ) {
-            chPrev = ch2;
-            GET_FAST(ch2);
-            i2++;
-   
-            retVal = bz2_putc ( ch2, dst );
-            UPDATE_CRC ( localCrc, (UChar)ch2 );
-   
-            if (ch2 != chPrev) {
-               count = 1;
-            } else {
-               count++;
-               if (count >= 4) {
-                  Int32 j2;
-                  UChar z;
-                  GET_FAST(z);
-                  for (j2 = 0;  j2 < (Int32)z;  j2++) {
-                     retVal = bz2_putc (ch2, dst);
-                     UPDATE_CRC ( localCrc, (UChar)ch2 );
-                  }
-                  i2++;
-                  count = 0;
-               }
-            }
-         }
-
-      }   /*-- if (blockRandomised) --*/
-
-      setGlobalCRC ( localCrc );
-   }
-   /*-- end of the in-line run-length-decoder. --*/
-}
-#undef GET_FAST
-
-
-
-/*---------------------------------------------------*/
-/*--- Processing of complete files and streams    ---*/
-/*---------------------------------------------------*/
-
-/*---------------------------------------------*/
-
-static Bool uncompressStream ( void *zStream, void *stream )
-{
-   UChar      magic1, magic2, magic3, magic4;
-   UChar      magic5, magic6;
-   UInt32     storedBlockCRC, storedCombinedCRC;
-   UInt32     computedBlockCRC, computedCombinedCRC;
-   Int32      currBlockNo;
-   IntNative  retVal;
-
-   SET_BINARY_MODE(stream);
-   SET_BINARY_MODE(zStream);
-
-   ERROR_IF_NOT_ZERO ( bz2_ferror(stream) );
-   ERROR_IF_NOT_ZERO ( bz2_ferror(zStream) );
-
-   bsSetStream ( zStream, False );
-
-   /*--
-      A bad magic number is `recoverable from';
-      return with False so the caller skips the file.
-   --*/
-   magic1 = bsGetUChar ();
-   magic2 = bsGetUChar ();
-   magic3 = bsGetUChar ();
-   magic4 = bsGetUChar ();
-   if (magic1 != 'B' ||
-       magic2 != 'Z' ||
-       magic3 != 'h' ||
-       magic4 < '1'  ||
-       magic4 > '9') {
-     bsFinishedWithStream();
-     retVal = bz2_fclose ( stream );
-     ERROR_IF_EOF ( retVal );
-     return False;
-   }
-
-   setDecompressStructureSizes ( magic4 - '0' );
-   computedCombinedCRC = 0;
-
-   if (verbosity >= 2) fprintf ( stderr, "\n    " );
-   currBlockNo = 0;
-
-   while (True) {
-      magic1 = bsGetUChar ();
-      magic2 = bsGetUChar ();
-      magic3 = bsGetUChar ();
-      magic4 = bsGetUChar ();
-      magic5 = bsGetUChar ();
-      magic6 = bsGetUChar ();
-      if (magic1 == 0x17 && magic2 == 0x72 &&
-          magic3 == 0x45 && magic4 == 0x38 &&
-          magic5 == 0x50 && magic6 == 0x90) break;
-
-      if (magic1 != 0x31 || magic2 != 0x41 ||
-          magic3 != 0x59 || magic4 != 0x26 ||
-          magic5 != 0x53 || magic6 != 0x59) badBlockHeader();
-
-      storedBlockCRC = bsGetUInt32 ();
-
-      if (bsR(1) == 1)
-         blockRandomised = True; else
-         blockRandomised = False;
-
-      currBlockNo++;
-      if (verbosity >= 2)
-         fprintf ( stderr, "[%d: huff+mtf ", currBlockNo );
-      getAndMoveToFrontDecode ();
-      ERROR_IF_NOT_ZERO ( bz2_ferror(zStream) );
-
-      initialiseCRC();
-      if (verbosity >= 2) fprintf ( stderr, "rt+rld" );
-      if (smallMode)
-         undoReversibleTransformation_small ( stream );
-         else
-         undoReversibleTransformation_fast  ( stream );
-
-      ERROR_IF_NOT_ZERO ( bz2_ferror(stream) );
-
-      computedBlockCRC = getFinalCRC();
-      if (verbosity >= 3)
-         fprintf ( stderr, " {0x%x, 0x%x}", storedBlockCRC, computedBlockCRC );
-      if (verbosity >= 2) fprintf ( stderr, "] " );
-
-      /*-- A bad CRC is considered a fatal error. --*/
-      if (storedBlockCRC != computedBlockCRC)
-         crcError ( storedBlockCRC, computedBlockCRC );
-
-      computedCombinedCRC = (computedCombinedCRC << 1) | (computedCombinedCRC 
>> 31);
-      computedCombinedCRC ^= computedBlockCRC;
-   };
-
-   if (verbosity >= 2) fprintf ( stderr, "\n    " );
-
-   storedCombinedCRC  = bsGetUInt32 ();
-   if (verbosity >= 2)
-      fprintf ( stderr,
-                "combined CRCs: stored = 0x%x, computed = 0x%x\n    ",
-                storedCombinedCRC, computedCombinedCRC );
-   if (storedCombinedCRC != computedCombinedCRC)
-      crcError ( storedCombinedCRC, computedCombinedCRC );
-
-
-   bsFinishedWithStream ();
-   ERROR_IF_NOT_ZERO ( bz2_ferror(zStream) );
-   retVal = bz2_fclose ( zStream );
-   ERROR_IF_EOF ( retVal );
-
-   ERROR_IF_NOT_ZERO ( bz2_ferror(stream) );
-   retVal = bz2_fflush ( stream );
-   ERROR_IF_NOT_ZERO ( retVal );
-   return True;
-}
-
-
-#if 0
-
-#endif
-/*---------------------------------------------------*/
-/*--- Error [non-] handling grunge                ---*/
-/*---------------------------------------------------*/
-
-
-
-static void
-myFree (void **p)
-{
-  free (*p);
-  *p = NULL;
-}
-
-/*---------------------------------------------*/
-/* Ugg... Orignal code doesn't free dynamic allocated memories. */
-
-static void cleanUpAndFail ( Int32 ec )
-{
-  myFree ((void **) &ll16);
-  myFree ((void **) &ll4);
-  myFree ((void **) &ll8);
-  myFree ((void **) &tt);
-
-  (*unzip_error) (NULL);
-}
-
-
-/*---------------------------------------------*/
-
-static void panic ( Char* s )
-{
-   cleanUpAndFail( 3 );
-}
-
-
-
-/*---------------------------------------------*/
-
-static void crcError ( UInt32 crcStored, UInt32 crcComputed )
-{
-   cleanUpAndFail( 2 );
-}
-
-
-/*---------------------------------------------*/
-
-static void compressedStreamEOF ( void )
-{
-   cleanUpAndFail( 2 );
-}
-
-
-/*---------------------------------------------*/
-
-static void ioError ( )
-{
-   cleanUpAndFail( 1 );
-}
-
-
-/*---------------------------------------------*/
-
-static void blockOverrun ()
-{
-   cleanUpAndFail( 2 );
-}
-
-
-/*---------------------------------------------*/
-
-static void badBlockHeader ()
-{
-   cleanUpAndFail( 2 );
-}
-
-
-
-/*---------------------------------------------*/
-static void uncompressOutOfMemory ( Int32 draw, Int32 blockSize )
-{
-   cleanUpAndFail(1);
-}
-
-
-
-/*-----------------------------------------------------------*/
-/*--- end                                         bzip2.c ---*/
-/*-----------------------------------------------------------*/
-
-void
-do_bunzip2 (void)
-{
-  Bool ret;
-  
-  /*-- Initialise --*/
-  ll4                     = NULL;
-  ll16                    = NULL;
-  ll8                     = NULL;
-  tt                      = NULL;
-#ifdef SMALL_BZIP2
-  smallMode               = True;
-#else
-  smallMode               = False;
-#endif
-  verbosity               = 0;
-  blockSize100k           = 0;
-  bsStream                = NULL;
-
-  outcnt = 0;
-  inptr = 0;
-  insize = 0;
-  
-  ret = uncompressStream ((void *)1, (void *)2); /* Arguments ignored. */
-  if (ret != True)
-    cleanUpAndFail(1);
-}
diff --git a/exec/exec.c b/exec/exec.c
index de796f9..0aa47af 100644
--- a/exec/exec.c
+++ b/exec/exec.c
@@ -11,9 +11,6 @@
    Can exec any executable format the BFD library understands
    to be for this flavor of machine.
    #endif
-   #ifdef BZIP2
-   Can bunzip2 executables into core on the fly.
-   #endif
 
 This file is part of the GNU Hurd.
 
@@ -75,10 +72,6 @@ b2he (error_t deflt)
 static void check_gzip (struct execdata *);
 #endif
 
-#ifdef BZIP2
-static void check_bzip2 (struct execdata *);
-#endif
-
 #ifdef BFD
 
 /* Check a section, updating the `locations' vector [BFD].  */
@@ -1243,105 +1236,6 @@ check_gzip (struct execdata *earg)
   prepare_in_memory (e);
 }
 #endif
-
-#ifdef BZIP2
-/* Check the file for being a bzip2'd image.  Return with ENOEXEC means not
-   a valid bzip2 file; return with another error means lossage in decoding;
-   return with zero means the file was uncompressed into memory which E now
-   points to, and `check' can be run again.  */
-
-static void
-check_bzip2 (struct execdata *earg)
-{
-  struct execdata *e = earg;
-  /* Entry points to bunzip2 engine.  */
-  void do_bunzip2 (void);
-  /* Callbacks from unzip for I/O and error interface.  */
-  extern int (*unzip_read) (char *buf, size_t maxread);
-  extern void (*unzip_write) (const char *buf, size_t nwrite);
-  extern void (*unzip_read_error) (void);
-  extern void (*unzip_error) (const char *msg);
-
-  char *zipdata = NULL;
-  size_t zipdatasz = 0;
-  FILE *zipout = NULL;
-  jmp_buf ziperr;
-  off_t zipread_pos = 0;
-  int zipread (char *buf, size_t maxread)
-    {
-      char *contents = map (e, zipread_pos, 1);
-      size_t n;
-      if (contents == NULL)
-       {
-         errno = e->error;
-         return -1;
-       }
-      n = MIN (maxread, map_buffer (e) + map_fsize (e) - contents);
-      errno = hurd_safe_copyin (buf, contents, n); /* XXX/fault */
-      if (errno)
-        longjmp (ziperr, 2);
-
-      zipread_pos += n;
-      return n;
-    }
-  void zipwrite (const char *buf, size_t nwrite)
-    {
-      if (fwrite (buf, nwrite, 1, zipout) != 1)
-       longjmp (ziperr, 1);
-    }
-  void ziprderr (void)
-    {
-      errno = ENOEXEC;
-      longjmp (ziperr, 2);
-    }
-  void ziperror (const char *msg)
-    {
-      errno = ENOEXEC;
-      longjmp (ziperr, 2);
-    }
-
-  unzip_read = zipread;
-  unzip_write = zipwrite;
-  unzip_read_error = ziprderr;
-  unzip_error = ziperror;
-
-  if (setjmp (ziperr))
-    {
-      /* Error in unzipping jumped out.  */
-      if (zipout)
-       {
-         fclose (zipout);
-         free (zipdata);
-       }
-      e->error = errno;
-      return;
-    }
-
-  zipout = open_memstream (&zipdata, &zipdatasz);
-  if (! zipout)
-    {
-      e->error = errno;
-      return;
-    }
-
-  /* Call the bunzip2 engine.  */
-  do_bunzip2 ();
-
-  /* The output is complete.  Clean up the stream and store its resultant
-     buffer and size in the execdata as the file contents.  */
-  fclose (zipout);
-
-  /* Clean up the old exec file stream's state.
-     Now that we have the contents all in memory (in E->file_data),
-     nothing will in fact ever try to use E->stream again.  */
-  finish (e, 0);
-
-  /* Prepare the stream state to use the file contents already in memory.  */
-  e->file_data = zipdata;
-  e->file_size = zipdatasz;
-  prepare_in_memory (e);
-}
-#endif
 
 
 static inline void *
@@ -1419,24 +1313,6 @@ do_exec (file_t file,
            check (e);
        }
 #endif
-#ifdef BZIP2
-      if (e->error == ENOEXEC)
-       {
-         /* See if it is a compressed image.  */
-         static pthread_mutex_t lock = PTHREAD_MUTEX_INITIALIZER;
-         /* The bzip2 code is really cheesy, not even close to thread-safe.
-            So we serialize all uses of it.  */
-         pthread_mutex_lock (&lock);
-         e->error = 0;
-         check_bzip2 (e);
-         pthread_mutex_unlock (&lock);
-         if (e->error == 0)
-           /* The file was uncompressed into memory, and now E describes the
-              uncompressed image rather than the actual file.  Check it again
-              for a valid magic number.  */
-           check (e);
-       }
-#endif
     }
 
 
diff --git a/libstore/do-bunzip2.c b/libstore/do-bunzip2.c
new file mode 100644
index 0000000..716a0cd
--- /dev/null
+++ b/libstore/do-bunzip2.c
@@ -0,0 +1,1745 @@
+/* bunzip2 engine, modified by address@hidden */
+
+/* Stolen from util.c. */
+#include <stdio.h>
+#include <sys/types.h>
+
+/* I/O interface */
+extern int (*unzip_read) (char *buf, size_t maxread);
+extern void (*unzip_write) (const char *buf, size_t nwrite);
+extern void (*unzip_read_error) (void);
+extern void (*unzip_error) (const char *msg);
+
+/* bzip2 doesn't require window sliding. Just for buffering. */
+#define INBUFSIZ       0x1000
+#define OUTBUFSIZ      0x1000
+
+static unsigned char inbuf[INBUFSIZ];
+static unsigned char outbuf[OUTBUFSIZ];
+static unsigned inptr;
+static unsigned insize;
+static unsigned outcnt;
+
+/* ===========================================================================
+ * Fill the input buffer. This is called only when the buffer is empty.
+ */
+static int
+fill_inbuf (int eof_ok)
+{
+  int len;
+  
+  /* Read as much as possible */
+  insize = 0;
+  do
+    {
+      len = (*unzip_read)((char*)inbuf+insize, INBUFSIZ-insize);
+      if (len == 0 || len == EOF)
+       break;
+      insize += len;
+    }
+  while (insize < INBUFSIZ);
+  
+  if (insize == 0)
+    {
+      if (eof_ok)
+       return EOF;
+      unzip_read_error();
+    }
+  
+  inptr = 1;
+  return inbuf[0];
+}
+
+static void
+flush_outbuf (void)
+{
+  if (outcnt == 0)
+    return;
+
+  (*unzip_write) ((char *) outbuf, outcnt);
+  outcnt = 0;
+}
+
+static inline int
+bz2_getc (void *stream)
+{
+  return inptr < insize ? inbuf[inptr++] : fill_inbuf (1);
+}
+
+static inline int
+bz2_putc (int c, void *stream)
+{
+  if (outcnt == OUTBUFSIZ)
+    flush_outbuf ();
+  outbuf[outcnt++] = c;
+  return c;
+}
+
+static inline int
+bz2_ferror (void *stream)
+{
+  return 0;
+}
+
+static inline int
+bz2_fflush (void *stream)
+{
+  flush_outbuf ();
+  return 0;
+}
+
+static inline int
+bz2_fclose (void *stream)
+{
+  flush_outbuf ();
+  return 0;
+}
+
+#define fprintf(s, f...)       /**/
+
+
+/*-----------------------------------------------------------*/
+/*--- A block-sorting, lossless compressor        bzip2.c ---*/
+/*-----------------------------------------------------------*/
+
+/*--
+  This program is bzip2, a lossless, block-sorting data compressor,
+  version 0.1pl2, dated 29-Aug-1997.
+
+  Copyright (C) 1996, 1997 by Julian Seward.
+     Guildford, Surrey, UK
+     email: address@hidden
+
+  This program is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program; if not, write to the Free Software
+  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+  The GNU General Public License is contained in the file LICENSE.
+
+  This program is based on (at least) the work of:
+     Mike Burrows
+     David Wheeler
+     Peter Fenwick
+     Alistair Moffat
+     Radford Neal
+     Ian H. Witten
+     Robert Sedgewick
+     Jon L. Bentley
+
+  For more information on these sources, see the file ALGORITHMS.
+--*/
+
+/*----------------------------------------------------*/
+/*--- IMPORTANT                                    ---*/
+/*----------------------------------------------------*/
+
+/*--
+   WARNING:
+      This program (attempts to) compress data by performing several
+      non-trivial transformations on it.  Unless you are 100% familiar
+      with *all* the algorithms contained herein, and with the
+      consequences of modifying them, you should NOT meddle with the
+      compression or decompression machinery.  Incorrect changes can
+      and very likely *will* lead to disastrous loss of data.
+
+   DISCLAIMER:
+      I TAKE NO RESPONSIBILITY FOR ANY LOSS OF DATA ARISING FROM THE
+      USE OF THIS PROGRAM, HOWSOEVER CAUSED.
+
+      Every compression of a file implies an assumption that the
+      compressed file can be decompressed to reproduce the original.
+      Great efforts in design, coding and testing have been made to
+      ensure that this program works correctly.  However, the
+      complexity of the algorithms, and, in particular, the presence
+      of various special cases in the code which occur with very low
+      but non-zero probability make it impossible to rule out the
+      possibility of bugs remaining in the program.  DO NOT COMPRESS
+      ANY DATA WITH THIS PROGRAM UNLESS YOU ARE PREPARED TO ACCEPT THE
+      POSSIBILITY, HOWEVER SMALL, THAT THE DATA WILL NOT BE RECOVERABLE.
+
+      That is not to say this program is inherently unreliable.
+      Indeed, I very much hope the opposite is true.  bzip2 has been
+      carefully constructed and extensively tested.
+
+   PATENTS:
+      To the best of my knowledge, bzip2 does not use any patented
+      algorithms.  However, I do not have the resources available to
+      carry out a full patent search.  Therefore I cannot give any
+      guarantee of the above statement.
+--*/
+
+
+
+/*----------------------------------------------------*/
+/*--- and now for something much more pleasant :-) ---*/
+/*----------------------------------------------------*/
+
+/*---------------------------------------------*/
+/*--
+  Place a 1 beside your platform, and 0 elsewhere.
+--*/
+
+/*--
+  Generic 32-bit Unix.
+  Also works on 64-bit Unix boxes.
+--*/
+#define BZ_UNIX      1
+
+/*--
+  Win32, as seen by Jacob Navia's excellent
+  port of (Chris Fraser & David Hanson)'s excellent
+  lcc compiler.
+--*/
+#define BZ_LCCWIN32  0
+
+
+
+/*---------------------------------------------*/
+/*--
+  Some stuff for all platforms.
+--*/
+
+#include <stdio.h>
+#include <stdlib.h>
+#if DEBUG
+  #include <assert.h>
+#endif
+#include <string.h>
+#include <signal.h>
+#include <math.h>
+
+#define ERROR_IF_EOF(i)       { if ((i) == EOF)  ioError(); }
+#define ERROR_IF_NOT_ZERO(i)  { if ((i) != 0)    ioError(); }
+#define ERROR_IF_MINUS_ONE(i) { if ((i) == (-1)) ioError(); }
+
+
+/*---------------------------------------------*/
+/*--
+   Platform-specific stuff.
+--*/
+
+#if BZ_UNIX
+   #include <sys/types.h>
+   #include <utime.h>
+   #include <unistd.h>
+   #include <malloc.h>
+   #include <sys/stat.h>
+   #include <sys/times.h>
+
+   #define Int32   int
+   #define UInt32  unsigned int
+   #define Char    char
+   #define UChar   unsigned char
+   #define Int16   short
+   #define UInt16  unsigned short
+
+   #define PATH_SEP    '/'
+   #define MY_LSTAT    lstat
+   #define MY_S_IFREG  S_ISREG
+   #define MY_STAT     stat
+
+   #define APPEND_FILESPEC(root, name) \
+      root=snocString((root), (name))
+
+   #define SET_BINARY_MODE(fd) /**/
+
+   /*--
+      You should try very hard to persuade your C compiler
+      to inline the bits marked INLINE.  Otherwise bzip2 will
+      run rather slowly.  gcc version 2.x is recommended.
+   --*/
+   #ifdef __GNUC__
+      #define INLINE   inline
+      #define NORETURN __attribute__ ((noreturn))
+   #else
+      #define INLINE   /**/
+      #define NORETURN /**/
+   #endif
+#endif
+
+
+
+#if BZ_LCCWIN32
+   #include <io.h>
+   #include <fcntl.h>
+   #include <sys\stat.h>
+
+   #define Int32   int
+   #define UInt32  unsigned int
+   #define Int16   short
+   #define UInt16  unsigned short
+   #define Char    char
+   #define UChar   unsigned char
+
+   #define INLINE         /**/
+   #define NORETURN       /**/
+   #define PATH_SEP       '\\'
+   #define MY_LSTAT       _stat
+   #define MY_STAT        _stat
+   #define MY_S_IFREG(x)  ((x) & _S_IFREG)
+
+   #if 0
+   /*-- lcc-win32 seems to expand wildcards itself --*/
+   #define APPEND_FILESPEC(root, spec)                \
+      do {                                            \
+         if ((spec)[0] == '-') {                      \
+            root = snocString((root), (spec));        \
+         } else {                                     \
+            struct _finddata_t c_file;                \
+            long hFile;                               \
+            hFile = _findfirst((spec), &c_file);      \
+            if ( hFile == -1L ) {                     \
+               root = snocString ((root), (spec));    \
+            } else {                                  \
+               int anInt = 0;                         \
+               while ( anInt == 0 ) {                 \
+                  root = snocString((root),           \
+                            &c_file.name[0]);         \
+                  anInt = _findnext(hFile, &c_file);  \
+               }                                      \
+            }                                         \
+         }                                            \
+      } while ( 0 )
+   #else
+   #define APPEND_FILESPEC(root, name)                \
+      root = snocString ((root), (name))
+   #endif
+
+   #define SET_BINARY_MODE(fd)                        \
+      do {                                            \
+         int retVal = setmode ( fileno ( fd ),        \
+                               O_BINARY );            \
+         ERROR_IF_MINUS_ONE ( retVal );               \
+      } while ( 0 )
+
+#endif
+
+
+/*---------------------------------------------*/
+/*--
+  Some more stuff for all platforms :-)
+--*/
+
+#define Bool   unsigned char
+#define True   1
+#define False  0
+
+/*--
+  IntNative is your platform's `native' int size.
+  Only here to avoid probs with 64-bit platforms.
+--*/
+#define IntNative int
+
+
+/*--
+   change to 1, or compile with -DDEBUG=1 to debug
+--*/
+#ifndef DEBUG
+#define DEBUG 0
+#endif
+
+
+/*---------------------------------------------------*/
+/*---                                             ---*/
+/*---------------------------------------------------*/
+
+/*--
+   Implementation notes, July 1997
+   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+   Memory allocation
+   ~~~~~~~~~~~~~~~~~
+   All large data structures are allocated on the C heap,
+   for better or for worse.  That includes the various
+   arrays of pointers, striped words, bytes, frequency
+   tables and buffers for compression and decompression.
+
+   bzip2 can operate at various block-sizes, ranging from
+   100k to 900k in 100k steps, and it allocates only as
+   much as it needs to.  When compressing, we know from the
+   command-line options what the block-size is going to be,
+   so all allocation can be done at start-up; if that
+   succeeds, there can be no further allocation problems.
+
+   Decompression is more complicated.  Each compressed file
+   contains, in its header, a byte indicating the block
+   size used for compression.  This means bzip2 potentially
+   needs to reallocate memory for each file it deals with,
+   which in turn opens the possibility for a memory allocation
+   failure part way through a run of files, by encountering
+   a file requiring a much larger block size than all the
+   ones preceding it.
+
+   The policy is to simply give up if a memory allocation
+   failure occurs.  During decompression, it would be
+   possible to move on to subsequent files in the hope that
+   some might ask for a smaller block size, but the
+   complications for doing this seem more trouble than they
+   are worth.
+
+
+   Compressed file formats
+   ~~~~~~~~~~~~~~~~~~~~~~~
+   [This is now entirely different from both 0.21, and from
+    any previous Huffman-coded variant of bzip.
+    See the associated file bzip2.txt for details.]
+
+
+   Error conditions
+   ~~~~~~~~~~~~~~~~
+   Dealing with error conditions is the least satisfactory
+   aspect of bzip2.  The policy is to try and leave the
+   filesystem in a consistent state, then quit, even if it
+   means not processing some of the files mentioned in the
+   command line.  `A consistent state' means that a file
+   exists either in its compressed or uncompressed form,
+   but not both.  This boils down to the rule `delete the
+   output file if an error condition occurs, leaving the
+   input intact'.  Input files are only deleted when we can
+   be pretty sure the output file has been written and
+   closed successfully.
+
+   Errors are a dog because there's so many things to
+   deal with.  The following can happen mid-file, and
+   require cleaning up.
+
+     internal `panics' -- indicating a bug
+     corrupted or inconsistent compressed file
+     can't allocate enough memory to decompress this file
+     I/O error reading/writing/opening/closing
+     signal catches -- Control-C, SIGTERM, SIGHUP.
+
+   Other conditions, primarily pertaining to file names,
+   can be checked in-between files, which makes dealing
+   with them easier.
+--*/
+
+
+
+/*---------------------------------------------------*/
+/*--- Misc (file handling) data decls             ---*/
+/*---------------------------------------------------*/
+
+static UInt32  bytesIn, bytesOut;
+static Int32   verbosity;
+static Bool    smallMode;
+static UInt32  globalCrc;
+
+
+
+
+static void    panic                 ( Char* );
+static void    ioError               ( void );
+static void    uncompressOutOfMemory ( Int32, Int32 );
+static void    blockOverrun          ( void );
+static void    badBlockHeader        ( void );
+static void    crcError              ( UInt32, UInt32 );
+static void    cleanUpAndFail        ( Int32 );
+static void    compressedStreamEOF   ( void );
+
+
+
+/*---------------------------------------------------*/
+/*--- Data decls for the front end                ---*/
+/*---------------------------------------------------*/
+
+/*--
+   The overshoot bytes allow us to avoid most of
+   the cost of pointer renormalisation during
+   comparison of rotations in sorting.
+   The figure of 20 is derived as follows:
+      qSort3 allows an overshoot of up to 10.
+      It then calls simpleSort, which calls
+      fullGtU, also with max overshoot 10.
+      fullGtU does up to 10 comparisons without
+      renormalising, giving 10+10 == 20.
+--*/
+#define NUM_OVERSHOOT_BYTES 20
+
+/*--
+  These are the main data structures for
+  the Burrows-Wheeler transform.
+--*/
+
+/*--
+  Pointers to compression and decompression
+  structures.  Set by
+     allocateCompressStructures   and
+     setDecompressStructureSizes
+
+  The structures are always set to be suitable
+  for a block of size 100000 * blockSize100k.
+--*/
+static UInt16   *ll16;     /*-- small decompress --*/
+static UChar    *ll4;      /*-- small decompress --*/
+
+static Int32    *tt;       /*-- fast decompress  --*/
+static UChar    *ll8;      /*-- fast decompress  --*/
+
+
+/*--
+  freq table collected to save a pass over the data
+  during decompression.
+--*/
+static Int32   unzftab[256];
+
+
+/*--
+   index of the last char in the block, so
+   the block size == last + 1.
+--*/
+static Int32  last;
+
+
+/*--
+  index in zptr[] of original string after sorting.
+--*/
+static Int32  origPtr;
+
+
+/*--
+  always: in the range 0 .. 9.
+  The current block size is 100000 * this number.
+--*/
+static Int32  blockSize100k;
+
+
+/*--
+  Used when sorting.  If too many long comparisons
+  happen, we stop sorting, randomise the block 
+  slightly, and try again.
+--*/
+
+static Bool   blockRandomised;
+
+
+
+/*---------------------------------------------------*/
+/*--- Data decls for the back end                 ---*/
+/*---------------------------------------------------*/
+
+#define MAX_ALPHA_SIZE 258
+#define MAX_CODE_LEN    23
+
+#define RUNA 0
+#define RUNB 1
+
+#define N_GROUPS 6
+#define G_SIZE   50
+#define N_ITERS  4
+
+#define MAX_SELECTORS (2 + (900000 / G_SIZE))
+
+static Bool  inUse[256];
+static Int32 nInUse;
+
+static UChar seqToUnseq[256];
+static UChar unseqToSeq[256];
+
+static UChar selector   [MAX_SELECTORS];
+static UChar selectorMtf[MAX_SELECTORS];
+
+static UChar len  [N_GROUPS][MAX_ALPHA_SIZE];
+
+/*-- decompress only --*/
+static Int32 limit  [N_GROUPS][MAX_ALPHA_SIZE];
+static Int32 base   [N_GROUPS][MAX_ALPHA_SIZE];
+static Int32 perm   [N_GROUPS][MAX_ALPHA_SIZE];
+static Int32 minLens[N_GROUPS];
+
+
+/*---------------------------------------------------*/
+/*--- 32-bit CRC grunge                           ---*/
+/*---------------------------------------------------*/
+
+/*--
+  I think this is an implementation of the AUTODIN-II,
+  Ethernet & FDDI 32-bit CRC standard.  Vaguely derived
+  from code by Rob Warnock, in Section 51 of the
+  comp.compression FAQ.
+--*/
+
+static UInt32 crc32Table[256] = {
+
+   /*-- Ugly, innit? --*/
+
+   0x00000000UL, 0x04c11db7UL, 0x09823b6eUL, 0x0d4326d9UL,
+   0x130476dcUL, 0x17c56b6bUL, 0x1a864db2UL, 0x1e475005UL,
+   0x2608edb8UL, 0x22c9f00fUL, 0x2f8ad6d6UL, 0x2b4bcb61UL,
+   0x350c9b64UL, 0x31cd86d3UL, 0x3c8ea00aUL, 0x384fbdbdUL,
+   0x4c11db70UL, 0x48d0c6c7UL, 0x4593e01eUL, 0x4152fda9UL,
+   0x5f15adacUL, 0x5bd4b01bUL, 0x569796c2UL, 0x52568b75UL,
+   0x6a1936c8UL, 0x6ed82b7fUL, 0x639b0da6UL, 0x675a1011UL,
+   0x791d4014UL, 0x7ddc5da3UL, 0x709f7b7aUL, 0x745e66cdUL,
+   0x9823b6e0UL, 0x9ce2ab57UL, 0x91a18d8eUL, 0x95609039UL,
+   0x8b27c03cUL, 0x8fe6dd8bUL, 0x82a5fb52UL, 0x8664e6e5UL,
+   0xbe2b5b58UL, 0xbaea46efUL, 0xb7a96036UL, 0xb3687d81UL,
+   0xad2f2d84UL, 0xa9ee3033UL, 0xa4ad16eaUL, 0xa06c0b5dUL,
+   0xd4326d90UL, 0xd0f37027UL, 0xddb056feUL, 0xd9714b49UL,
+   0xc7361b4cUL, 0xc3f706fbUL, 0xceb42022UL, 0xca753d95UL,
+   0xf23a8028UL, 0xf6fb9d9fUL, 0xfbb8bb46UL, 0xff79a6f1UL,
+   0xe13ef6f4UL, 0xe5ffeb43UL, 0xe8bccd9aUL, 0xec7dd02dUL,
+   0x34867077UL, 0x30476dc0UL, 0x3d044b19UL, 0x39c556aeUL,
+   0x278206abUL, 0x23431b1cUL, 0x2e003dc5UL, 0x2ac12072UL,
+   0x128e9dcfUL, 0x164f8078UL, 0x1b0ca6a1UL, 0x1fcdbb16UL,
+   0x018aeb13UL, 0x054bf6a4UL, 0x0808d07dUL, 0x0cc9cdcaUL,
+   0x7897ab07UL, 0x7c56b6b0UL, 0x71159069UL, 0x75d48ddeUL,
+   0x6b93dddbUL, 0x6f52c06cUL, 0x6211e6b5UL, 0x66d0fb02UL,
+   0x5e9f46bfUL, 0x5a5e5b08UL, 0x571d7dd1UL, 0x53dc6066UL,
+   0x4d9b3063UL, 0x495a2dd4UL, 0x44190b0dUL, 0x40d816baUL,
+   0xaca5c697UL, 0xa864db20UL, 0xa527fdf9UL, 0xa1e6e04eUL,
+   0xbfa1b04bUL, 0xbb60adfcUL, 0xb6238b25UL, 0xb2e29692UL,
+   0x8aad2b2fUL, 0x8e6c3698UL, 0x832f1041UL, 0x87ee0df6UL,
+   0x99a95df3UL, 0x9d684044UL, 0x902b669dUL, 0x94ea7b2aUL,
+   0xe0b41de7UL, 0xe4750050UL, 0xe9362689UL, 0xedf73b3eUL,
+   0xf3b06b3bUL, 0xf771768cUL, 0xfa325055UL, 0xfef34de2UL,
+   0xc6bcf05fUL, 0xc27dede8UL, 0xcf3ecb31UL, 0xcbffd686UL,
+   0xd5b88683UL, 0xd1799b34UL, 0xdc3abdedUL, 0xd8fba05aUL,
+   0x690ce0eeUL, 0x6dcdfd59UL, 0x608edb80UL, 0x644fc637UL,
+   0x7a089632UL, 0x7ec98b85UL, 0x738aad5cUL, 0x774bb0ebUL,
+   0x4f040d56UL, 0x4bc510e1UL, 0x46863638UL, 0x42472b8fUL,
+   0x5c007b8aUL, 0x58c1663dUL, 0x558240e4UL, 0x51435d53UL,
+   0x251d3b9eUL, 0x21dc2629UL, 0x2c9f00f0UL, 0x285e1d47UL,
+   0x36194d42UL, 0x32d850f5UL, 0x3f9b762cUL, 0x3b5a6b9bUL,
+   0x0315d626UL, 0x07d4cb91UL, 0x0a97ed48UL, 0x0e56f0ffUL,
+   0x1011a0faUL, 0x14d0bd4dUL, 0x19939b94UL, 0x1d528623UL,
+   0xf12f560eUL, 0xf5ee4bb9UL, 0xf8ad6d60UL, 0xfc6c70d7UL,
+   0xe22b20d2UL, 0xe6ea3d65UL, 0xeba91bbcUL, 0xef68060bUL,
+   0xd727bbb6UL, 0xd3e6a601UL, 0xdea580d8UL, 0xda649d6fUL,
+   0xc423cd6aUL, 0xc0e2d0ddUL, 0xcda1f604UL, 0xc960ebb3UL,
+   0xbd3e8d7eUL, 0xb9ff90c9UL, 0xb4bcb610UL, 0xb07daba7UL,
+   0xae3afba2UL, 0xaafbe615UL, 0xa7b8c0ccUL, 0xa379dd7bUL,
+   0x9b3660c6UL, 0x9ff77d71UL, 0x92b45ba8UL, 0x9675461fUL,
+   0x8832161aUL, 0x8cf30badUL, 0x81b02d74UL, 0x857130c3UL,
+   0x5d8a9099UL, 0x594b8d2eUL, 0x5408abf7UL, 0x50c9b640UL,
+   0x4e8ee645UL, 0x4a4ffbf2UL, 0x470cdd2bUL, 0x43cdc09cUL,
+   0x7b827d21UL, 0x7f436096UL, 0x7200464fUL, 0x76c15bf8UL,
+   0x68860bfdUL, 0x6c47164aUL, 0x61043093UL, 0x65c52d24UL,
+   0x119b4be9UL, 0x155a565eUL, 0x18197087UL, 0x1cd86d30UL,
+   0x029f3d35UL, 0x065e2082UL, 0x0b1d065bUL, 0x0fdc1becUL,
+   0x3793a651UL, 0x3352bbe6UL, 0x3e119d3fUL, 0x3ad08088UL,
+   0x2497d08dUL, 0x2056cd3aUL, 0x2d15ebe3UL, 0x29d4f654UL,
+   0xc5a92679UL, 0xc1683bceUL, 0xcc2b1d17UL, 0xc8ea00a0UL,
+   0xd6ad50a5UL, 0xd26c4d12UL, 0xdf2f6bcbUL, 0xdbee767cUL,
+   0xe3a1cbc1UL, 0xe760d676UL, 0xea23f0afUL, 0xeee2ed18UL,
+   0xf0a5bd1dUL, 0xf464a0aaUL, 0xf9278673UL, 0xfde69bc4UL,
+   0x89b8fd09UL, 0x8d79e0beUL, 0x803ac667UL, 0x84fbdbd0UL,
+   0x9abc8bd5UL, 0x9e7d9662UL, 0x933eb0bbUL, 0x97ffad0cUL,
+   0xafb010b1UL, 0xab710d06UL, 0xa6322bdfUL, 0xa2f33668UL,
+   0xbcb4666dUL, 0xb8757bdaUL, 0xb5365d03UL, 0xb1f740b4UL
+};
+
+
+/*---------------------------------------------*/
+
+static void initialiseCRC ( void )
+{
+   globalCrc = 0xffffffffUL;
+}
+
+
+/*---------------------------------------------*/
+
+static UInt32 getFinalCRC ( void )
+{
+   return ~globalCrc;
+}
+
+
+/*---------------------------------------------*/
+
+static UInt32 getGlobalCRC ( void )
+{
+   return globalCrc;
+}
+
+
+/*---------------------------------------------*/
+
+static void setGlobalCRC ( UInt32 newCrc )
+{
+   globalCrc = newCrc;
+}
+
+
+/*---------------------------------------------*/
+
+#define UPDATE_CRC(crcVar,cha)              \
+{                                           \
+   crcVar = (crcVar << 8) ^                 \
+            crc32Table[(crcVar >> 24) ^     \
+                       ((UChar)cha)];       \
+}
+
+
+/*---------------------------------------------------*/
+/*--- Bit stream I/O                              ---*/
+/*---------------------------------------------------*/
+
+
+static UInt32 bsBuff;
+static Int32  bsLive;
+static void*  bsStream;
+static Bool   bsWriting;
+
+
+/*---------------------------------------------*/
+
+static void bsSetStream ( void* f, Bool wr )
+{
+   if (bsStream != NULL) panic ( "bsSetStream" );
+   bsStream = f;
+   bsLive = 0;
+   bsBuff = 0;
+   bytesOut = 0;
+   bytesIn = 0;
+   bsWriting = wr;
+}
+
+
+/*---------------------------------------------*/
+
+static void bsFinishedWithStream ( void )
+{
+   if (bsWriting)
+      while (bsLive > 0) {
+         bz2_putc ( (UChar)(bsBuff >> 24), bsStream );
+         bsBuff <<= 8;
+         bsLive -= 8;
+         bytesOut++;
+      }
+   bsStream = NULL;
+}
+
+
+/*---------------------------------------------*/
+
+#define bsNEEDR(nz)                           \
+{                                             \
+   while (bsLive < nz) {                      \
+      Int32 zzi = bz2_getc ( bsStream );      \
+      if (zzi == EOF) compressedStreamEOF();  \
+      bsBuff = (bsBuff << 8) | (zzi & 0xffL); \
+      bsLive += 8;                            \
+   }                                          \
+}
+
+
+/*---------------------------------------------*/
+
+#define bsR1(vz)                              \
+{                                             \
+   bsNEEDR(1);                                \
+   vz = (bsBuff >> (bsLive-1)) & 1;           \
+   bsLive--;                                  \
+}
+
+
+/*---------------------------------------------*/
+
+static INLINE UInt32 bsR ( Int32 n )
+{
+   UInt32 v;
+   bsNEEDR ( n );
+   v = (bsBuff >> (bsLive-n)) & ((1 << n)-1);
+   bsLive -= n;
+   return v;
+}
+
+
+/*---------------------------------------------*/
+
+static UChar bsGetUChar ( void )
+{
+   return (UChar)bsR(8);
+}
+
+
+
+/*---------------------------------------------*/
+
+static Int32 bsGetUInt32 ( void )
+{
+   UInt32 u;
+   u = 0;
+   u = (u << 8) | bsR(8);
+   u = (u << 8) | bsR(8);
+   u = (u << 8) | bsR(8);
+   u = (u << 8) | bsR(8);
+   return u;
+}
+
+
+/*---------------------------------------------*/
+
+static UInt32 bsGetIntVS ( UInt32 numBits )
+{
+   return (UInt32)bsR(numBits);
+}
+
+
+
+/*---------------------------------------------------*/
+/*--- Huffman coding low-level stuff              ---*/
+/*---------------------------------------------------*/
+
+
+/*---------------------------------------------*/
+
+static void hbCreateDecodeTables ( Int32 *limit,
+                                  Int32 *base,
+                                  Int32 *perm,
+                                  UChar *length,
+                                  Int32 minLen,
+                                  Int32 maxLen,
+                                  Int32 alphaSize )
+{
+   Int32 pp, i, j, vec;
+
+   pp = 0;
+   for (i = minLen; i <= maxLen; i++)
+      for (j = 0; j < alphaSize; j++)
+         if (length[j] == i) { perm[pp] = j; pp++; };
+
+   for (i = 0; i < MAX_CODE_LEN; i++) base[i] = 0;
+   for (i = 0; i < alphaSize; i++) base[length[i]+1]++;
+
+   for (i = 1; i < MAX_CODE_LEN; i++) base[i] += base[i-1];
+
+   for (i = 0; i < MAX_CODE_LEN; i++) limit[i] = 0;
+   vec = 0;
+
+   for (i = minLen; i <= maxLen; i++) {
+      vec += (base[i+1] - base[i]);
+      limit[i] = vec-1;
+      vec <<= 1;
+   }
+   for (i = minLen + 1; i <= maxLen; i++)
+      base[i] = ((limit[i-1] + 1) << 1) - base[i];
+}
+
+
+
+/*---------------------------------------------------*/
+/*--- Undoing the reversible transformation       ---*/
+/*---------------------------------------------------*/
+
+/*---------------------------------------------*/
+
+#define SET_LL4(i,n)                                          \
+   { if (((i) & 0x1) == 0)                                    \
+        ll4[(i) >> 1] = (ll4[(i) >> 1] & 0xf0) | (n); else    \
+        ll4[(i) >> 1] = (ll4[(i) >> 1] & 0x0f) | ((n) << 4);  \
+   }
+
+
+#define GET_LL4(i)                             \
+    (((UInt32)(ll4[(i) >> 1])) >> (((i) << 2) & 0x4) & 0xF)
+
+
+#define SET_LL(i,n)                       \
+   { ll16[i] = (UInt16)(n & 0x0000ffff);  \
+     SET_LL4(i, n >> 16);                 \
+   }
+
+
+#define GET_LL(i) \
+   (((UInt32)ll16[i]) | (GET_LL4(i) << 16))
+
+
+/*---------------------------------------------*/
+/*--
+  Manage memory for compression/decompression.
+  When compressing, a single block size applies to
+  all files processed, and that's set when the
+  program starts.  But when decompressing, each file
+  processed could have been compressed with a
+  different block size, so we may have to free
+  and reallocate on a per-file basis.
+
+  A call with argument of zero means
+  `free up everything.'  And a value of zero for
+  blockSize100k means no memory is currently allocated.
+--*/
+
+
+/*---------------------------------------------*/
+
+static void setDecompressStructureSizes ( Int32 newSize100k )
+{
+   if (! (0 <= newSize100k   && newSize100k   <= 9 &&
+          0 <= blockSize100k && blockSize100k <= 9))
+      panic ( "setDecompressStructureSizes" );
+
+   if (newSize100k == blockSize100k) return;
+
+   blockSize100k = newSize100k;
+
+   if (ll16  != NULL) free ( ll16  );
+   if (ll4   != NULL) free ( ll4   );
+   if (ll8   != NULL) free ( ll8   );
+   if (tt    != NULL) free ( tt    );
+
+   if (newSize100k == 0) return;
+
+   if (smallMode) {
+
+      Int32 n = 100000 * newSize100k;
+      ll16    = malloc ( n * sizeof(UInt16) );
+      ll4     = malloc ( ((n+1) >> 1) * sizeof(UChar) );
+
+      if (ll4 == NULL || ll16 == NULL) {
+         Int32 totalDraw
+            = n * sizeof(Int16) + ((n+1) >> 1) * sizeof(UChar);
+         uncompressOutOfMemory ( totalDraw, n );
+      }
+
+   } else {
+
+      Int32 n = 100000 * newSize100k;
+      ll8     = malloc ( n * sizeof(UChar) );
+      tt      = malloc ( n * sizeof(Int32) );
+
+      if (ll8 == NULL || tt == NULL) {
+         Int32 totalDraw
+            = n * sizeof(UChar) + n * sizeof(UInt32);
+         uncompressOutOfMemory ( totalDraw, n );
+      }
+
+   }
+}
+
+
+
+/*---------------------------------------------------*/
+/*--- The new back end                            ---*/
+/*---------------------------------------------------*/
+
+/*---------------------------------------------*/
+
+static void makeMaps ( void )
+{
+   Int32 i;
+   nInUse = 0;
+   for (i = 0; i < 256; i++)
+      if (inUse[i]) {
+         seqToUnseq[nInUse] = i;
+         unseqToSeq[i] = nInUse;
+         nInUse++;
+      }
+}
+
+
+
+/*---------------------------------------------*/
+
+static void recvDecodingTables ( void )
+{
+   Int32 i, j, t, nGroups, nSelectors, alphaSize;
+   Int32 minLen, maxLen;
+   Bool inUse16[16];
+
+   /*--- Receive the mapping table ---*/
+   for (i = 0; i < 16; i++)
+      if (bsR(1) == 1) 
+         inUse16[i] = True; else 
+         inUse16[i] = False;
+
+   for (i = 0; i < 256; i++) inUse[i] = False;
+
+   for (i = 0; i < 16; i++)
+      if (inUse16[i])
+         for (j = 0; j < 16; j++)
+            if (bsR(1) == 1) inUse[i * 16 + j] = True;
+
+   makeMaps();
+   alphaSize = nInUse+2;
+
+   /*--- Now the selectors ---*/
+   nGroups = bsR ( 3 );
+   nSelectors = bsR ( 15 );
+   for (i = 0; i < nSelectors; i++) {
+      j = 0;
+      while (bsR(1) == 1) j++;
+      selectorMtf[i] = j;
+   }
+
+   /*--- Undo the MTF values for the selectors. ---*/
+   {
+      UChar pos[N_GROUPS], tmp, v;
+      for (v = 0; v < nGroups; v++) pos[v] = v;
+   
+      for (i = 0; i < nSelectors; i++) {
+         v = selectorMtf[i];
+         tmp = pos[v];
+         while (v > 0) { pos[v] = pos[v-1]; v--; }
+         pos[0] = tmp;
+         selector[i] = tmp;
+      }
+   }
+
+   /*--- Now the coding tables ---*/
+   for (t = 0; t < nGroups; t++) {
+      Int32 curr = bsR ( 5 );
+      for (i = 0; i < alphaSize; i++) {
+         while (bsR(1) == 1) {
+            if (bsR(1) == 0) curr++; else curr--;
+         }
+         len[t][i] = curr;
+      }
+   }
+
+   /*--- Create the Huffman decoding tables ---*/
+   for (t = 0; t < nGroups; t++) {
+      minLen = 32;
+      maxLen = 0;
+      for (i = 0; i < alphaSize; i++) {
+         if (len[t][i] > maxLen) maxLen = len[t][i];
+         if (len[t][i] < minLen) minLen = len[t][i];
+      }
+      hbCreateDecodeTables ( 
+         &limit[t][0], &base[t][0], &perm[t][0], &len[t][0],
+         minLen, maxLen, alphaSize
+      );
+      minLens[t] = minLen;
+   }
+}
+
+
+/*---------------------------------------------*/
+
+#define GET_MTF_VAL(lval)                 \
+{                                         \
+   Int32 zt, zn, zvec, zj;                \
+   if (groupPos == 0) {                   \
+      groupNo++;                          \
+      groupPos = G_SIZE;                  \
+   }                                      \
+   groupPos--;                            \
+   zt = selector[groupNo];                \
+   zn = minLens[zt];                      \
+   zvec = bsR ( zn );                     \
+   while (zvec > limit[zt][zn]) {         \
+      zn++; bsR1(zj);                     \
+      zvec = (zvec << 1) | zj;            \
+   };                                     \
+   lval = perm[zt][zvec - base[zt][zn]];  \
+}
+
+
+/*---------------------------------------------*/
+
+static void getAndMoveToFrontDecode ( void )
+{
+   UChar  yy[256];
+   Int32  i, j, nextSym, limitLast;
+   Int32  EOB, groupNo, groupPos;
+
+   limitLast = 100000 * blockSize100k;
+   origPtr   = bsGetIntVS ( 24 );
+
+   recvDecodingTables();
+   EOB      = nInUse+1;
+   groupNo  = -1;
+   groupPos = 0;
+
+   /*--
+      Setting up the unzftab entries here is not strictly
+      necessary, but it does save having to do it later
+      in a separate pass, and so saves a block's worth of
+      cache misses.
+   --*/
+   for (i = 0; i <= 255; i++) unzftab[i] = 0;
+
+   for (i = 0; i <= 255; i++) yy[i] = (UChar) i;
+
+   last = -1;
+
+   GET_MTF_VAL(nextSym);
+
+   while (True) {
+
+      if (nextSym == EOB) break;
+
+      if (nextSym == RUNA || nextSym == RUNB) {
+         UChar ch;
+         Int32 s = -1;
+         Int32 N = 1;
+         do {
+            if (nextSym == RUNA) s = s + (0+1) * N; else
+            if (nextSym == RUNB) s = s + (1+1) * N;
+            N = N * 2;
+            GET_MTF_VAL(nextSym);
+         }
+            while (nextSym == RUNA || nextSym == RUNB);
+
+         s++;
+         ch = seqToUnseq[yy[0]];
+         unzftab[ch] += s;
+
+         if (smallMode)
+            while (s > 0) {
+               last++; 
+               ll16[last] = ch;
+               s--;
+            }
+         else
+            while (s > 0) {
+               last++;
+               ll8[last] = ch;
+               s--;
+            };
+
+         if (last >= limitLast) blockOverrun();
+         continue;
+
+      } else {
+
+         UChar tmp;
+         last++; if (last >= limitLast) blockOverrun();
+
+         tmp = yy[nextSym-1];
+         unzftab[seqToUnseq[tmp]]++;
+         if (smallMode)
+            ll16[last] = seqToUnseq[tmp]; else
+            ll8[last]  = seqToUnseq[tmp];
+
+         /*--
+            This loop is hammered during decompression,
+            hence the unrolling.
+
+            for (j = nextSym-1; j > 0; j--) yy[j] = yy[j-1];
+         --*/
+
+         j = nextSym-1;
+         for (; j > 3; j -= 4) {
+            yy[j]   = yy[j-1];
+            yy[j-1] = yy[j-2];
+            yy[j-2] = yy[j-3];
+            yy[j-3] = yy[j-4];
+         }
+         for (; j > 0; j--) yy[j] = yy[j-1];
+
+         yy[0] = tmp;
+         GET_MTF_VAL(nextSym);
+         continue;
+      }
+   }
+}
+
+
+/*---------------------------------------------------*/
+/*--- Stuff for randomising repetitive blocks     ---*/
+/*---------------------------------------------------*/
+
+/*---------------------------------------------*/
+static Int32 rNums[512] = { 
+   619, 720, 127, 481, 931, 816, 813, 233, 566, 247, 
+   985, 724, 205, 454, 863, 491, 741, 242, 949, 214, 
+   733, 859, 335, 708, 621, 574, 73, 654, 730, 472, 
+   419, 436, 278, 496, 867, 210, 399, 680, 480, 51, 
+   878, 465, 811, 169, 869, 675, 611, 697, 867, 561, 
+   862, 687, 507, 283, 482, 129, 807, 591, 733, 623, 
+   150, 238, 59, 379, 684, 877, 625, 169, 643, 105, 
+   170, 607, 520, 932, 727, 476, 693, 425, 174, 647, 
+   73, 122, 335, 530, 442, 853, 695, 249, 445, 515, 
+   909, 545, 703, 919, 874, 474, 882, 500, 594, 612, 
+   641, 801, 220, 162, 819, 984, 589, 513, 495, 799, 
+   161, 604, 958, 533, 221, 400, 386, 867, 600, 782, 
+   382, 596, 414, 171, 516, 375, 682, 485, 911, 276, 
+   98, 553, 163, 354, 666, 933, 424, 341, 533, 870, 
+   227, 730, 475, 186, 263, 647, 537, 686, 600, 224, 
+   469, 68, 770, 919, 190, 373, 294, 822, 808, 206, 
+   184, 943, 795, 384, 383, 461, 404, 758, 839, 887, 
+   715, 67, 618, 276, 204, 918, 873, 777, 604, 560, 
+   951, 160, 578, 722, 79, 804, 96, 409, 713, 940, 
+   652, 934, 970, 447, 318, 353, 859, 672, 112, 785, 
+   645, 863, 803, 350, 139, 93, 354, 99, 820, 908, 
+   609, 772, 154, 274, 580, 184, 79, 626, 630, 742, 
+   653, 282, 762, 623, 680, 81, 927, 626, 789, 125, 
+   411, 521, 938, 300, 821, 78, 343, 175, 128, 250, 
+   170, 774, 972, 275, 999, 639, 495, 78, 352, 126, 
+   857, 956, 358, 619, 580, 124, 737, 594, 701, 612, 
+   669, 112, 134, 694, 363, 992, 809, 743, 168, 974, 
+   944, 375, 748, 52, 600, 747, 642, 182, 862, 81, 
+   344, 805, 988, 739, 511, 655, 814, 334, 249, 515, 
+   897, 955, 664, 981, 649, 113, 974, 459, 893, 228, 
+   433, 837, 553, 268, 926, 240, 102, 654, 459, 51, 
+   686, 754, 806, 760, 493, 403, 415, 394, 687, 700, 
+   946, 670, 656, 610, 738, 392, 760, 799, 887, 653, 
+   978, 321, 576, 617, 626, 502, 894, 679, 243, 440, 
+   680, 879, 194, 572, 640, 724, 926, 56, 204, 700, 
+   707, 151, 457, 449, 797, 195, 791, 558, 945, 679, 
+   297, 59, 87, 824, 713, 663, 412, 693, 342, 606, 
+   134, 108, 571, 364, 631, 212, 174, 643, 304, 329, 
+   343, 97, 430, 751, 497, 314, 983, 374, 822, 928, 
+   140, 206, 73, 263, 980, 736, 876, 478, 430, 305, 
+   170, 514, 364, 692, 829, 82, 855, 953, 676, 246, 
+   369, 970, 294, 750, 807, 827, 150, 790, 288, 923, 
+   804, 378, 215, 828, 592, 281, 565, 555, 710, 82, 
+   896, 831, 547, 261, 524, 462, 293, 465, 502, 56, 
+   661, 821, 976, 991, 658, 869, 905, 758, 745, 193, 
+   768, 550, 608, 933, 378, 286, 215, 979, 792, 961, 
+   61, 688, 793, 644, 986, 403, 106, 366, 905, 644, 
+   372, 567, 466, 434, 645, 210, 389, 550, 919, 135, 
+   780, 773, 635, 389, 707, 100, 626, 958, 165, 504, 
+   920, 176, 193, 713, 857, 265, 203, 50, 668, 108, 
+   645, 990, 626, 197, 510, 357, 358, 850, 858, 364, 
+   936, 638
+};
+
+
+#define RAND_DECLS                                \
+   Int32 rNToGo = 0;                              \
+   Int32 rTPos  = 0;                              \
+
+#define RAND_MASK ((rNToGo == 1) ? 1 : 0)
+
+#define RAND_UPD_MASK                             \
+   if (rNToGo == 0) {                             \
+      rNToGo = rNums[rTPos];                      \
+      rTPos++; if (rTPos == 512) rTPos = 0;       \
+   }                                              \
+   rNToGo--;
+
+
+
+/*---------------------------------------------------*/
+/*--- The Reversible Transformation (tm)          ---*/
+/*---------------------------------------------------*/
+
+/*---------------------------------------------*/
+
+
+static INLINE Int32 indexIntoF ( Int32 indx, Int32 *cftab )
+{
+   Int32 nb, na, mid;
+   nb = 0;
+   na = 256;
+   do {
+      mid = (nb + na) >> 1;
+      if (indx >= cftab[mid]) nb = mid; else na = mid;
+   }
+   while (na - nb != 1);
+   return nb;
+}
+
+
+
+#define GET_SMALL(cccc)                     \
+                                            \
+      cccc = indexIntoF ( tPos, cftab );    \
+      tPos = GET_LL(tPos);
+
+
+
+static void undoReversibleTransformation_small ( void* dst )
+{
+   Int32  cftab[257], cftabAlso[257];
+   Int32  i, j, tmp, tPos;
+   UChar  ch;
+
+   /*--
+      We assume here that the global array unzftab will
+      already be holding the frequency counts for
+      ll8[0 .. last].
+   --*/
+
+   /*-- Set up cftab to facilitate generation of indexIntoF --*/
+   cftab[0] = 0;
+   for (i = 1; i <= 256; i++) cftab[i] = unzftab[i-1];
+   for (i = 1; i <= 256; i++) cftab[i] += cftab[i-1];
+
+   /*-- Make a copy of it, used in generation of T --*/
+   for (i = 0; i <= 256; i++) cftabAlso[i] = cftab[i];
+
+   /*-- compute the T vector --*/
+   for (i = 0; i <= last; i++) {
+      ch = (UChar)ll16[i];
+      SET_LL(i, cftabAlso[ch]);
+      cftabAlso[ch]++;
+   }
+
+   /*--
+      Compute T^(-1) by pointer reversal on T.  This is rather
+      subtle, in that, if the original block was two or more
+      (in general, N) concatenated copies of the same thing,
+      the T vector will consist of N cycles, each of length
+      blocksize / N, and decoding will involve traversing one
+      of these cycles N times.  Which particular cycle doesn't
+      matter -- they are all equivalent.  The tricky part is to
+      make sure that the pointer reversal creates a correct
+      reversed cycle for us to traverse.  So, the code below
+      simply reverses whatever cycle origPtr happens to fall into,
+      without regard to the cycle length.  That gives one reversed
+      cycle, which for normal blocks, is the entire block-size long.
+      For repeated blocks, it will be interspersed with the other
+      N-1 non-reversed cycles.  Providing that the F-subscripting
+      phase which follows starts at origPtr, all then works ok.
+   --*/
+   i = origPtr;
+   j = GET_LL(i);
+   do {
+      tmp = GET_LL(j);
+      SET_LL(j, i);
+      i = j;
+      j = tmp;
+   }
+      while (i != origPtr);
+
+   /*--
+      We recreate the original by subscripting F through T^(-1).
+      The run-length-decoder below requires characters incrementally,
+      so tPos is set to a starting value, and is updated by
+      the GET_SMALL macro.
+   --*/
+   tPos   = origPtr;
+
+   /*-------------------------------------------------*/
+   /*--
+      This is pretty much a verbatim copy of the
+      run-length decoder present in the distribution
+      bzip-0.21; it has to be here to avoid creating
+      block[] as an intermediary structure.  As in 0.21,
+      this code derives from some sent to me by
+      Christian von Roques.
+
+      It allows dst==NULL, so as to support the test (-t)
+      option without slowing down the fast decompression
+      code.
+   --*/
+   {
+      IntNative retVal;
+      Int32     i2, count, chPrev, ch2;
+      UInt32    localCrc;
+
+      count    = 0;
+      i2       = 0;
+      ch2      = 256;   /*-- not a char and not EOF --*/
+      localCrc = getGlobalCRC();
+
+      {
+         RAND_DECLS;
+         while ( i2 <= last ) {
+            chPrev = ch2;
+            GET_SMALL(ch2);
+            if (blockRandomised) {
+               RAND_UPD_MASK;
+               ch2 ^= (UInt32)RAND_MASK;
+            }
+            i2++;
+   
+            if (dst)
+               retVal = bz2_putc ( ch2, dst );
+   
+            UPDATE_CRC ( localCrc, (UChar)ch2 );
+   
+            if (ch2 != chPrev) {
+               count = 1;
+            } else {
+               count++;
+               if (count >= 4) {
+                  Int32 j2;
+                  UChar z;
+                  GET_SMALL(z);
+                  if (blockRandomised) {
+                     RAND_UPD_MASK;
+                     z ^= RAND_MASK;
+                  }
+                  for (j2 = 0;  j2 < (Int32)z;  j2++) {
+                     if (dst) retVal = bz2_putc (ch2, dst);
+                     UPDATE_CRC ( localCrc, (UChar)ch2 );
+                  }
+                  i2++;
+                  count = 0;
+               }
+            }
+         }
+      }
+
+      setGlobalCRC ( localCrc );
+   }
+   /*-- end of the in-line run-length-decoder. --*/
+}
+#undef GET_SMALL
+
+
+/*---------------------------------------------*/
+
+#define GET_FAST(cccc)                       \
+                                             \
+      cccc = ll8[tPos];                      \
+      tPos = tt[tPos];
+
+
+
+static void undoReversibleTransformation_fast ( void* dst )
+{
+   Int32  cftab[257];
+   Int32  i, tPos;
+   UChar  ch;
+
+   /*--
+      We assume here that the global array unzftab will
+      already be holding the frequency counts for
+      ll8[0 .. last].
+   --*/
+
+   /*-- Set up cftab to facilitate generation of T^(-1) --*/
+   cftab[0] = 0;
+   for (i = 1; i <= 256; i++) cftab[i] = unzftab[i-1];
+   for (i = 1; i <= 256; i++) cftab[i] += cftab[i-1];
+
+   /*-- compute the T^(-1) vector --*/
+   for (i = 0; i <= last; i++) {
+      ch = (UChar)ll8[i];
+      tt[cftab[ch]] = i;
+      cftab[ch]++;
+   }
+
+   /*--
+      We recreate the original by subscripting L through T^(-1).
+      The run-length-decoder below requires characters incrementally,
+      so tPos is set to a starting value, and is updated by
+      the GET_FAST macro.
+   --*/
+   tPos   = tt[origPtr];
+
+   /*-------------------------------------------------*/
+   /*--
+      This is pretty much a verbatim copy of the
+      run-length decoder present in the distribution
+      bzip-0.21; it has to be here to avoid creating
+      block[] as an intermediary structure.  As in 0.21,
+      this code derives from some sent to me by
+      Christian von Roques.
+   --*/
+   {
+      IntNative retVal;
+      Int32     i2, count, chPrev, ch2;
+      UInt32    localCrc;
+
+      count    = 0;
+      i2       = 0;
+      ch2      = 256;   /*-- not a char and not EOF --*/
+      localCrc = getGlobalCRC();
+
+      if (blockRandomised) {
+         RAND_DECLS;
+         while ( i2 <= last ) {
+            chPrev = ch2;
+            GET_FAST(ch2);
+            RAND_UPD_MASK;
+            ch2 ^= (UInt32)RAND_MASK;
+            i2++;
+   
+            retVal = bz2_putc ( ch2, dst );
+            UPDATE_CRC ( localCrc, (UChar)ch2 );
+   
+            if (ch2 != chPrev) {
+               count = 1;
+            } else {
+               count++;
+               if (count >= 4) {
+                  Int32 j2;
+                  UChar z;
+                  GET_FAST(z);
+                  RAND_UPD_MASK;
+                  z ^= RAND_MASK;
+                  for (j2 = 0;  j2 < (Int32)z;  j2++) {
+                     retVal = bz2_putc (ch2, dst);
+                     UPDATE_CRC ( localCrc, (UChar)ch2 );
+                  }
+                  i2++;
+                  count = 0;
+               }
+            }
+         }
+
+      } else {
+
+         while ( i2 <= last ) {
+            chPrev = ch2;
+            GET_FAST(ch2);
+            i2++;
+   
+            retVal = bz2_putc ( ch2, dst );
+            UPDATE_CRC ( localCrc, (UChar)ch2 );
+   
+            if (ch2 != chPrev) {
+               count = 1;
+            } else {
+               count++;
+               if (count >= 4) {
+                  Int32 j2;
+                  UChar z;
+                  GET_FAST(z);
+                  for (j2 = 0;  j2 < (Int32)z;  j2++) {
+                     retVal = bz2_putc (ch2, dst);
+                     UPDATE_CRC ( localCrc, (UChar)ch2 );
+                  }
+                  i2++;
+                  count = 0;
+               }
+            }
+         }
+
+      }   /*-- if (blockRandomised) --*/
+
+      setGlobalCRC ( localCrc );
+   }
+   /*-- end of the in-line run-length-decoder. --*/
+}
+#undef GET_FAST
+
+
+
+/*---------------------------------------------------*/
+/*--- Processing of complete files and streams    ---*/
+/*---------------------------------------------------*/
+
+/*---------------------------------------------*/
+
+static Bool uncompressStream ( void *zStream, void *stream )
+{
+   UChar      magic1, magic2, magic3, magic4;
+   UChar      magic5, magic6;
+   UInt32     storedBlockCRC, storedCombinedCRC;
+   UInt32     computedBlockCRC, computedCombinedCRC;
+   Int32      currBlockNo;
+   IntNative  retVal;
+
+   SET_BINARY_MODE(stream);
+   SET_BINARY_MODE(zStream);
+
+   ERROR_IF_NOT_ZERO ( bz2_ferror(stream) );
+   ERROR_IF_NOT_ZERO ( bz2_ferror(zStream) );
+
+   bsSetStream ( zStream, False );
+
+   /*--
+      A bad magic number is `recoverable from';
+      return with False so the caller skips the file.
+   --*/
+   magic1 = bsGetUChar ();
+   magic2 = bsGetUChar ();
+   magic3 = bsGetUChar ();
+   magic4 = bsGetUChar ();
+   if (magic1 != 'B' ||
+       magic2 != 'Z' ||
+       magic3 != 'h' ||
+       magic4 < '1'  ||
+       magic4 > '9') {
+     bsFinishedWithStream();
+     retVal = bz2_fclose ( stream );
+     ERROR_IF_EOF ( retVal );
+     return False;
+   }
+
+   setDecompressStructureSizes ( magic4 - '0' );
+   computedCombinedCRC = 0;
+
+   if (verbosity >= 2) fprintf ( stderr, "\n    " );
+   currBlockNo = 0;
+
+   while (True) {
+      magic1 = bsGetUChar ();
+      magic2 = bsGetUChar ();
+      magic3 = bsGetUChar ();
+      magic4 = bsGetUChar ();
+      magic5 = bsGetUChar ();
+      magic6 = bsGetUChar ();
+      if (magic1 == 0x17 && magic2 == 0x72 &&
+          magic3 == 0x45 && magic4 == 0x38 &&
+          magic5 == 0x50 && magic6 == 0x90) break;
+
+      if (magic1 != 0x31 || magic2 != 0x41 ||
+          magic3 != 0x59 || magic4 != 0x26 ||
+          magic5 != 0x53 || magic6 != 0x59) badBlockHeader();
+
+      storedBlockCRC = bsGetUInt32 ();
+
+      if (bsR(1) == 1)
+         blockRandomised = True; else
+         blockRandomised = False;
+
+      currBlockNo++;
+      if (verbosity >= 2)
+         fprintf ( stderr, "[%d: huff+mtf ", currBlockNo );
+      getAndMoveToFrontDecode ();
+      ERROR_IF_NOT_ZERO ( bz2_ferror(zStream) );
+
+      initialiseCRC();
+      if (verbosity >= 2) fprintf ( stderr, "rt+rld" );
+      if (smallMode)
+         undoReversibleTransformation_small ( stream );
+         else
+         undoReversibleTransformation_fast  ( stream );
+
+      ERROR_IF_NOT_ZERO ( bz2_ferror(stream) );
+
+      computedBlockCRC = getFinalCRC();
+      if (verbosity >= 3)
+         fprintf ( stderr, " {0x%x, 0x%x}", storedBlockCRC, computedBlockCRC );
+      if (verbosity >= 2) fprintf ( stderr, "] " );
+
+      /*-- A bad CRC is considered a fatal error. --*/
+      if (storedBlockCRC != computedBlockCRC)
+         crcError ( storedBlockCRC, computedBlockCRC );
+
+      computedCombinedCRC = (computedCombinedCRC << 1) | (computedCombinedCRC 
>> 31);
+      computedCombinedCRC ^= computedBlockCRC;
+   };
+
+   if (verbosity >= 2) fprintf ( stderr, "\n    " );
+
+   storedCombinedCRC  = bsGetUInt32 ();
+   if (verbosity >= 2)
+      fprintf ( stderr,
+                "combined CRCs: stored = 0x%x, computed = 0x%x\n    ",
+                storedCombinedCRC, computedCombinedCRC );
+   if (storedCombinedCRC != computedCombinedCRC)
+      crcError ( storedCombinedCRC, computedCombinedCRC );
+
+
+   bsFinishedWithStream ();
+   ERROR_IF_NOT_ZERO ( bz2_ferror(zStream) );
+   retVal = bz2_fclose ( zStream );
+   ERROR_IF_EOF ( retVal );
+
+   ERROR_IF_NOT_ZERO ( bz2_ferror(stream) );
+   retVal = bz2_fflush ( stream );
+   ERROR_IF_NOT_ZERO ( retVal );
+   return True;
+}
+
+
+#if 0
+
+#endif
+/*---------------------------------------------------*/
+/*--- Error [non-] handling grunge                ---*/
+/*---------------------------------------------------*/
+
+
+
+static void
+myFree (void **p)
+{
+  free (*p);
+  *p = NULL;
+}
+
+/*---------------------------------------------*/
+/* Ugg... Orignal code doesn't free dynamic allocated memories. */
+
+static void cleanUpAndFail ( Int32 ec )
+{
+  myFree ((void **) &ll16);
+  myFree ((void **) &ll4);
+  myFree ((void **) &ll8);
+  myFree ((void **) &tt);
+
+  (*unzip_error) (NULL);
+}
+
+
+/*---------------------------------------------*/
+
+static void panic ( Char* s )
+{
+   cleanUpAndFail( 3 );
+}
+
+
+
+/*---------------------------------------------*/
+
+static void crcError ( UInt32 crcStored, UInt32 crcComputed )
+{
+   cleanUpAndFail( 2 );
+}
+
+
+/*---------------------------------------------*/
+
+static void compressedStreamEOF ( void )
+{
+   cleanUpAndFail( 2 );
+}
+
+
+/*---------------------------------------------*/
+
+static void ioError ( )
+{
+   cleanUpAndFail( 1 );
+}
+
+
+/*---------------------------------------------*/
+
+static void blockOverrun ()
+{
+   cleanUpAndFail( 2 );
+}
+
+
+/*---------------------------------------------*/
+
+static void badBlockHeader ()
+{
+   cleanUpAndFail( 2 );
+}
+
+
+
+/*---------------------------------------------*/
+static void uncompressOutOfMemory ( Int32 draw, Int32 blockSize )
+{
+   cleanUpAndFail(1);
+}
+
+
+
+/*-----------------------------------------------------------*/
+/*--- end                                         bzip2.c ---*/
+/*-----------------------------------------------------------*/
+
+void
+do_bunzip2 (void)
+{
+  Bool ret;
+  
+  /*-- Initialise --*/
+  ll4                     = NULL;
+  ll16                    = NULL;
+  ll8                     = NULL;
+  tt                      = NULL;
+#ifdef SMALL_BZIP2
+  smallMode               = True;
+#else
+  smallMode               = False;
+#endif
+  verbosity               = 0;
+  blockSize100k           = 0;
+  bsStream                = NULL;
+
+  outcnt = 0;
+  inptr = 0;
+  insize = 0;
+  
+  ret = uncompressStream ((void *)1, (void *)2); /* Arguments ignored. */
+  if (ret != True)
+    cleanUpAndFail(1);
+}
-- 
1.7.10.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]