bug-hurd
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Hurd/gnu-nat.c] Use ptid_t.lwpid to store, thread ids instead of ptid_


From: Pedro Alves
Subject: [Hurd/gnu-nat.c] Use ptid_t.lwpid to store, thread ids instead of ptid_t.tid. (was: Re: [PATCH 1/2] Port gdbserver to GNU/Hurd)
Date: Wed, 18 Sep 2013 15:52:49 +0100
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:17.0) Gecko/20130625 Thunderbird/17.0.7

On 09/18/2013 02:48 PM, Yue Lu wrote:
> On Wed, Sep 18, 2013 at 8:11 PM, Pedro Alves <address@hidden> wrote:
>>
>> /me gives it a try.
>>
>> I grepped for ptid_build and ptid_get_tid in *gnu* files, and
>> adjusted all I found.
> 
> I have tried this way before, but it doesn't work.
> After apply your patch, the gdb can't use, it says "Can't fetch
> registers from thread Thread 29826.3: No such thread".
...
> As before, I thought it is a big problem, so I don't dig into it. Your
> last email has reminder me, both you and I  forgot to patch the
> i386gnu-nat.c which also used the tid filed.

Eh, grep-fail then.

> 
> Add this everything is ok.

Nice, thanks.  I've merged that in, and applied it.

---------
Subject: [Hurd/gnu-nat.c] Use ptid_t.lwpid to store
 thread ids instead of ptid_t.tid.

In preparation for reusing gnu-nat.c in gdbserver, switch to storing
thread ids in the lwpid field of ptid_t rather than in the tid
field.  The Hurd's thread model is 1:1, so it doesn't feel wrong
anyway.

gdb/
2013-09-18  Pedro Alves  <address@hidden>
            Yue Lu  <address@hidden>

        * gnu-nat.c (inf_validate_procs, gnu_wait, gnu_resume)
        (gnu_create_inferior)
        (gnu_attach, gnu_thread_alive, gnu_pid_to_str, cur_thread)
        (set_sig_thread_cmd): Use the lwpid field of ptids to
        store/extract thread ids instead of the tid field.
        * i386gnu-nat.c (gnu_fetch_registers): Adjust.
---
 gdb/gnu-nat.c     | 24 ++++++++++++------------
 gdb/i386gnu-nat.c |  4 ++--
 2 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/gdb/gnu-nat.c b/gdb/gnu-nat.c
index fa55b10..b4f99f8 100644
--- a/gdb/gnu-nat.c
+++ b/gdb/gnu-nat.c
@@ -1083,7 +1083,7 @@ inf_validate_procs (struct inf *inf)
            last = thread;
            proc_debug (thread, "new thread: %d", threads[i]);

-           ptid = ptid_build (inf->pid, 0, thread->tid);
+           ptid = ptid_build (inf->pid, thread->tid, 0);

            /* Tell GDB's generic thread code.  */

@@ -1613,17 +1613,17 @@ rewait:

   thread = inf->wait.thread;
   if (thread)
-    ptid = ptid_build (inf->pid, 0, thread->tid);
+    ptid = ptid_build (inf->pid, thread->tid, 0);
   else if (ptid_equal (ptid, minus_one_ptid))
     thread = inf_tid_to_thread (inf, -1);
   else
-    thread = inf_tid_to_thread (inf, ptid_get_tid (ptid));
+    thread = inf_tid_to_thread (inf, ptid_get_lwp (ptid));

   if (!thread || thread->port == MACH_PORT_NULL)
     {
       /* TID is dead; try and find a new thread.  */
       if (inf_update_procs (inf) && inf->threads)
-       ptid = ptid_build (inf->pid, 0, inf->threads->tid); /* The first
+       ptid = ptid_build (inf->pid, inf->threads->tid, 0); /* The first
                                                               available
                                                               thread.  */
       else
@@ -2022,7 +2022,7 @@ gnu_resume (struct target_ops *ops,
   else
     /* Just allow a single thread to run.  */
     {
-      struct proc *thread = inf_tid_to_thread (inf, ptid_get_tid (ptid));
+      struct proc *thread = inf_tid_to_thread (inf, ptid_get_lwp (ptid));

       if (!thread)
        error (_("Can't run single thread id %s: no such thread!"),
@@ -2033,7 +2033,7 @@ gnu_resume (struct target_ops *ops,

   if (step)
     {
-      step_thread = inf_tid_to_thread (inf, ptid_get_tid (ptid));
+      step_thread = inf_tid_to_thread (inf, ptid_get_lwp (ptid));
       if (!step_thread)
        warning (_("Can't step thread id %s: no such thread."),
                 target_pid_to_str (ptid));
@@ -2133,7 +2133,7 @@ gnu_create_inferior (struct target_ops *ops,

   /* We now have thread info.  */
   thread_change_ptid (inferior_ptid,
-                     ptid_build (inf->pid, 0, inf_pick_first_thread ()));
+                     ptid_build (inf->pid, inf_pick_first_thread (), 0));

   startup_inferior (inf->pending_execs);

@@ -2190,7 +2190,7 @@ gnu_attach (struct target_ops *ops, char *args, int 
from_tty)

   inf_update_procs (inf);

-  inferior_ptid = ptid_build (pid, 0, inf_pick_first_thread ());
+  inferior_ptid = ptid_build (pid, inf_pick_first_thread (), 0);

   /* We have to initialize the terminal settings now, since the code
      below might try to restore them.  */
@@ -2261,7 +2261,7 @@ gnu_thread_alive (struct target_ops *ops, ptid_t ptid)
 {
   inf_update_procs (gnu_current_inf);
   return !!inf_tid_to_thread (gnu_current_inf,
-                             ptid_get_tid (ptid));
+                             ptid_get_lwp (ptid));
 }

 
@@ -2596,7 +2596,7 @@ static char *
 gnu_pid_to_str (struct target_ops *ops, ptid_t ptid)
 {
   struct inf *inf = gnu_current_inf;
-  int tid = ptid_get_tid (ptid);
+  int tid = ptid_get_lwp (ptid);
   struct proc *thread = inf_tid_to_thread (inf, tid);

   if (thread)
@@ -2729,7 +2729,7 @@ cur_thread (void)
 {
   struct inf *inf = cur_inf ();
   struct proc *thread = inf_tid_to_thread (inf,
-                                          ptid_get_tid (inferior_ptid));
+                                          ptid_get_lwp (inferior_ptid));
   if (!thread)
     error (_("No current thread."));
   return thread;
@@ -2928,7 +2928,7 @@ set_sig_thread_cmd (char *args, int from_tty)
        error (_("Thread ID %s not known.  "
                 "Use the \"info threads\" command to\n"
               "see the IDs of currently known threads."), args);
-      inf->signal_thread = inf_tid_to_thread (inf, ptid_get_tid (ptid));
+      inf->signal_thread = inf_tid_to_thread (inf, ptid_get_lwp (ptid));
     }
 }

diff --git a/gdb/i386gnu-nat.c b/gdb/i386gnu-nat.c
index 0fd8d91..2b93fee 100644
--- a/gdb/i386gnu-nat.c
+++ b/gdb/i386gnu-nat.c
@@ -132,7 +132,7 @@ gnu_fetch_registers (struct target_ops *ops,
   inf_update_procs (gnu_current_inf);

   thread = inf_tid_to_thread (gnu_current_inf,
-                             ptid_get_tid (inferior_ptid));
+                             ptid_get_lwp (inferior_ptid));
   if (!thread)
     error (_("Can't fetch registers from thread %s: No such thread"),
           target_pid_to_str (inferior_ptid));
@@ -225,7 +225,7 @@ gnu_store_registers (struct target_ops *ops,
   inf_update_procs (gnu_current_inf);

   thread = inf_tid_to_thread (gnu_current_inf,
-                             ptid_get_tid (inferior_ptid));
+                             ptid_get_lwp (inferior_ptid));
   if (!thread)
     error (_("Couldn't store registers into thread %s: No such thread"),
           target_pid_to_str (inferior_ptid));
-- 
1.7.11.7





reply via email to

[Prev in Thread] Current Thread [Next in Thread]