[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
make 3.79.1 on Cray PVPs
From: |
Charles M. Castevens IV |
Subject: |
make 3.79.1 on Cray PVPs |
Date: |
Wed, 25 Apr 2001 15:01:15 -0400 (EDT) |
make 3.79.1 has a bug in it that prevents it from compiling on Cray PVPs, or
at least the J90 Classic with cf90 3.2.0.0 that I'm on. I used "./configure
--prefix=/usr/people/castevens/local" and then "make." I've included the
Makefile at the bottom of this email, and here are the last lines of output
before the crash:
+ cc -DALIASPATH=\"/usr/people/castevens/local/share/locale:.\"
-DLOCALEDIR=\"/usr/people/castevens/local/share/locale\"
-DLIBDIR=\"/usr/people/castevens/local/lib\"
-DINCLUDEDIR=\"/usr/people/castevens/local/include\" -DHAVE_CONFIG_H -I. -I.
-I./glob -g -c gettext.c
+ CC-147 cc: ERROR File = gettext.c, Line = 795
+ Declaration is incompatible with "nls_uint32 SWAP(nls_uint32)" (declared at
+ line 792).
+
+ SWAP (i)
+ ^
+
+ 1 error detected in the compilation of "gettext.c".
The fix is to add three lines, starting at line 708 in gettext.c.
prompt% diff gettext.c.orig gettext.c.cray
707a708,710
> #ifdef CRAY
> #undef UINT_MAX
> #endif
Inspiration: http://www.flora.org/lynx-dev/html/month091998/msg00602.html
because on Cray PVPs UINT_MAX is also defined in limits.h (and also as
4294967295U).
I will be happy to run and send you the output of any tests on this modified
make, just to be sure it works. I've had luck compiling MPICH with -j14 so
far, things seem fine.
--
address@hidden
charles castevens
# Generated automatically from Makefile.in by configure.
# Makefile.in generated automatically by automake 1.4 from Makefile.am
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
# This is a -*-Makefile-*-, or close enough
SHELL = /bin/sh
srcdir = .
top_srcdir = .
prefix = /usr/people/castevens/local
exec_prefix = ${prefix}
bindir = ${exec_prefix}/bin
sbindir = ${exec_prefix}/sbin
libexecdir = ${exec_prefix}/libexec
datadir = ${prefix}/share
sysconfdir = ${prefix}/etc
sharedstatedir = ${prefix}/com
localstatedir = ${prefix}/var
libdir = ${exec_prefix}/lib
infodir = ${prefix}/info
mandir = ${prefix}/man
includedir = ${prefix}/include
oldincludedir = /usr/include
DESTDIR =
pkgdatadir = $(datadir)/make
pkglibdir = $(libdir)/make
pkgincludedir = $(includedir)/make
top_builddir = .
ACLOCAL = /tmp/castevens/make-3.79.1/missing aclocal
AUTOCONF = /tmp/castevens/make-3.79.1/missing autoconf
AUTOMAKE = /tmp/castevens/make-3.79.1/missing automake
AUTOHEADER = /tmp/castevens/make-3.79.1/missing autoheader
INSTALL = ./install-sh -c
INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_SCRIPT = ${INSTALL_PROGRAM}
transform = s,x,x,
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = j90-cray-unicos10.0.0.3
host_triplet = c90-cray-unicos
ALL_LINGUAS = de es fr ja ko nl pl pt_BR ru
ALL_MOFILES = de.mo es.mo fr.mo ja.mo ko.mo nl.mo pl.mo pt_BR.mo ru.mo
ALL_POFILES = de.po es.po fr.po ja.po ko.po nl.po pl.po pt_BR.po ru.po
AR = ar
CC = cc
CPP = cc -E
GETCONF = getconf
GLOBDIR = glob
GLOBINC = -I$(srcdir)/glob
GLOBLIB = glob/libglob.a
LIBOBJS = gettext.o getloadavg.o
MAKEINFO = /tmp/castevens/make-3.79.1/missing makeinfo
MOFILES = de.mo es.mo fr.mo ja.mo ko.mo nl.mo pl.mo pt_BR.mo ru.mo
PACKAGE = make
PERL = perl
RANLIB = ranlib
REMOTE = stub
VERSION = 3.79.1
AUTOMAKE_OPTIONS = 1.4
SUBDIRS = $(GLOBDIR) i18n
bin_PROGRAMS = make
# These source files also have gettext references
SRCS = ar.c arscan.c commands.c dir.c expand.c file.c function.c
getopt.c implicit.c job.c main.c misc.c read.c remake.c rule.c
signame.c variable.c vpath.c
make_SOURCES = $(SRCS) default.c remote-$(REMOTE).c version.c
getopt1.c
noinst_HEADERS = commands.h dep.h filedef.h job.h make.h rule.h variable.h
debug.h signame.h getopt.h gettext.h
make_LDADD = $(LIBOBJS) alloca.o $(GLOBLIB)
man_MANS = make.1
info_TEXINFOS = make.texinfo
DEFS = -DALIASPATH=\"$(aliaspath)\" -DLOCALEDIR=\"$(localedir)\"
-DLIBDIR=\"$(libdir)\" -DINCLUDEDIR=\"$(includedir)\" -DHAVE_CONFIG_H
INCLUDES = -I. -I$(srcdir) $(GLOBINC)
EXTRA_DIST = README build.sh.in $(man_MANS) README.customs remote-cstms.c
make-stds.texi SCOPTIONS SMakefile README.Amiga
Makefile.ami config.ami make.lnk amiga.c amiga.h README.DOS
Makefile.DOS configure.bat dosbuild.bat configh.dos README.W32
NMakefile config.h.W32 build_w32.bat subproc.bat readme.vms
makefile.vms makefile.com config.h-vms vmsdir.h vmsfunctions.c
vmsify.c gettext.c glob/COPYING.LIB
glob/ChangeLog glob/Makefile.am glob/Makefile.ami
glob/Makefile.in glob/SCOPTIONS glob/SMakefile glob/configure.bat
glob/fnmatch.c glob/fnmatch.h glob/glob.c glob/glob.h
MOSTLYCLEANFILES = loadavg.c
CLEANFILES = loadavg
MAKE_HOST = c90-cray-unicos
# --------------- Internationalization Section
POTFILES = $(SRCS) remote-cstms.c vmsfunctions.c
localedir = $(prefix)/share/locale
aliaspath = $(localedir):.
# --------------- Local INSTALL Section
# If necessary, change the gid of the app and turn on the setgid flag.
#
# Whether or not make needs to be installed setgid.
# The value should be either `true' or `false'.
# On many systems, the getloadavg function (used to implement the `-l'
# switch) will not work unless make is installed setgid kmem.
#
inst_setgid = false
# Install make setgid to this group so it can get the load average.
#
inst_group =
# > check-regression
#
# Look for the make test suite, and run it if found and we can find perl.
# If we're building outside the tree, we use symlinks to make a local copy of
# the test suite. Unfortunately the test suite itself isn't localizable yet.
#
MAKETESTFLAGS =
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = build.sh
PROGRAMS = $(bin_PROGRAMS)
CPPFLAGS =
LDFLAGS =
LIBS = -ldir
make_OBJECTS = ar.o arscan.o commands.o dir.o expand.o file.o \
function.o getopt.o implicit.o job.o main.o misc.o read.o remake.o \
rule.o signame.o variable.o vpath.o default.o remote-$(REMOTE).o \
version.o getopt1.o
make_DEPENDENCIES = gettext.o getloadavg.o alloca.o
make_LDFLAGS =
CFLAGS = -g
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS)
$(CFLAGS)
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
TEXI2DVI = texi2dvi
INFO_DEPS = make.info
DVIS = make.dvi
TEXINFOS = make.texinfo
man1dir = $(mandir)/man1
MANS = $(man_MANS)
NROFF = nroff
HEADERS = $(noinst_HEADERS)
DIST_COMMON = README ./stamp-h.in ABOUT-NLS AUTHORS COPYING ChangeLog \
INSTALL Makefile.am Makefile.in NEWS acconfig.h acinclude.m4 aclocal.m4 \
alloca.c build.sh.in config.guess config.h.in config.sub configure \
configure.in getloadavg.c gettext.c install-sh missing mkinstalldirs \
texinfo.tex
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
TAR = tar
GZIP_ENV = --best
SOURCES = $(make_SOURCES)
OBJECTS = $(make_OBJECTS)
all: all-redirect
.SUFFIXES:
.SUFFIXES: .S .c .dvi .info .o .ps .s .texi .texinfo .txi
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) \
&& CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
$(ACLOCAL_M4): configure.in acinclude.m4
cd $(srcdir) && $(ACLOCAL)
config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4)
$(CONFIGURE_DEPENDENCIES)
cd $(srcdir) && $(AUTOCONF)
config.h: stamp-h
@if test ! -f $@; then \
rm -f stamp-h; \
$(MAKE) stamp-h; \
else :; fi
stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
cd $(top_builddir) \
&& CONFIG_FILES= CONFIG_HEADERS=config.h \
$(SHELL) ./config.status
@echo timestamp > stamp-h 2> /dev/null
$(srcdir)/config.h.in: $(srcdir)/stamp-h.in
@if test ! -f $@; then \
rm -f $(srcdir)/stamp-h.in; \
$(MAKE) $(srcdir)/stamp-h.in; \
else :; fi
$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h
cd $(top_srcdir) && $(AUTOHEADER)
@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
mostlyclean-hdr:
clean-hdr:
distclean-hdr:
-rm -f config.h
maintainer-clean-hdr:
build.sh: $(top_builddir)/config.status build.sh.in
cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL)
./config.status
mostlyclean-binPROGRAMS:
clean-binPROGRAMS:
-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
distclean-binPROGRAMS:
maintainer-clean-binPROGRAMS:
install-binPROGRAMS: $(bin_PROGRAMS)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(bindir)
@list='$(bin_PROGRAMS)'; for p in $$list; do \
if test -f $$p; then \
echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed
's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
$(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed
's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
else :; fi; \
done
uninstall-binPROGRAMS:
@$(NORMAL_UNINSTALL)
list='$(bin_PROGRAMS)'; for p in $$list; do \
rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed
'$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
done
.c.o:
$(COMPILE) -c $<
.s.o:
$(COMPILE) -c $<
.S.o:
$(COMPILE) -c $<
mostlyclean-compile:
-rm -f *.o core *.core
clean-compile:
distclean-compile:
-rm -f *.tab.c
maintainer-clean-compile:
make: $(make_OBJECTS) $(make_DEPENDENCIES)
@rm -f make
$(LINK) $(make_LDFLAGS) $(make_OBJECTS) $(make_LDADD) $(LIBS)
make.info: make.texinfo
make.dvi: make.texinfo
DVIPS = dvips
.texi.info:
@cd $(srcdir) && rm -f $@ address@hidden address@hidden
cd $(srcdir) \
&& $(MAKEINFO) `echo $< | sed 's,.*/,,'`
.texi.dvi:
TEXINPUTS=.:$$TEXINPUTS \
MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
.texi:
@cd $(srcdir) && rm -f $@ address@hidden address@hidden
cd $(srcdir) \
&& $(MAKEINFO) `echo $< | sed 's,.*/,,'`
.texinfo.info:
@cd $(srcdir) && rm -f $@ address@hidden address@hidden
cd $(srcdir) \
&& $(MAKEINFO) `echo $< | sed 's,.*/,,'`
.texinfo:
@cd $(srcdir) && rm -f $@ address@hidden address@hidden
cd $(srcdir) \
&& $(MAKEINFO) `echo $< | sed 's,.*/,,'`
.texinfo.dvi:
TEXINPUTS=.:$$TEXINPUTS \
MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
.txi.info:
@cd $(srcdir) && rm -f $@ address@hidden address@hidden
cd $(srcdir) \
&& $(MAKEINFO) `echo $< | sed 's,.*/,,'`
.txi.dvi:
TEXINPUTS=.:$$TEXINPUTS \
MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
.txi:
@cd $(srcdir) && rm -f $@ address@hidden address@hidden
cd $(srcdir) \
&& $(MAKEINFO) `echo $< | sed 's,.*/,,'`
.dvi.ps:
$(DVIPS) $< -o $@
install-info-am: $(INFO_DEPS)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(infodir)
@list='$(INFO_DEPS)'; \
for file in $$list; do \
d=$(srcdir); \
for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`;
do \
if test -f $$d/$$ifile; then \
echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile";
\
$(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
else : ; fi; \
done; \
done
@$(POST_INSTALL)
@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i
debian' >/dev/null 2>&1; then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
echo " install-info --info-dir=$(DESTDIR)$(infodir)
$(DESTDIR)$(infodir)/$$file";\
install-info --info-dir=$(DESTDIR)$(infodir)
$(DESTDIR)$(infodir)/$$file || :;\
done; \
else : ; fi
uninstall-info:
$(PRE_UNINSTALL)
@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i
debian' >/dev/null 2>&1; then \
ii=yes; \
else ii=; fi; \
list='$(INFO_DEPS)'; \
for file in $$list; do \
test -z "$ii" \
|| install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
done
@$(NORMAL_UNINSTALL)
list='$(INFO_DEPS)'; \
for file in $$list; do \
(cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9]
$$file-[0-9][0-9]); \
done
dist-info: $(INFO_DEPS)
list='$(INFO_DEPS)'; \
for base in $$list; do \
d=$(srcdir); \
for file in `cd $$d && eval echo $$base*`; do \
test -f $(distdir)/$$file \
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|| cp -p $$d/$$file $(distdir)/$$file; \
done; \
done
mostlyclean-aminfo:
-rm -f make.aux make.cp make.cps make.dvi make.fn make.fns make.ky \
make.kys make.ps make.log make.pg make.toc make.tp make.tps \
make.vr make.vrs make.op make.tr make.cv make.cn
clean-aminfo:
distclean-aminfo:
maintainer-clean-aminfo:
cd $(srcdir) && for i in $(INFO_DEPS); do \
rm -f $$i; \
if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
rm -f $$i-[0-9]*; \
fi; \
done
install-man1:
$(mkinstalldirs) $(DESTDIR)$(man1dir)
@list='$(man1_MANS)'; \
l2='$(man_MANS)'; for i in $$l2; do \
case "$$i" in \
*.1*) list="$$list $$i" ;; \
esac; \
done; \
for i in $$list; do \
if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
else file=$$i; fi; \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
$(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
done
uninstall-man1:
@list='$(man1_MANS)'; \
l2='$(man_MANS)'; for i in $$l2; do \
case "$$i" in \
*.1*) list="$$list $$i" ;; \
esac; \
done; \
for i in $$list; do \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
rm -f $(DESTDIR)$(man1dir)/$$inst; \
done
install-man: $(MANS)
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-man1
uninstall-man:
@$(NORMAL_UNINSTALL)
$(MAKE) $(AM_MAKEFLAGS) uninstall-man1
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive \
check-recursive installcheck-recursive info-recursive dvi-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
rev="$$subdir $$rev"; \
test "$$subdir" = "." && dot_seen=yes; \
done; \
test "$$dot_seen" = "no" && rev=". $$rev"; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
done
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP)
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
here=`pwd` && cd $(srcdir) \
&& mkid -f$$here/ID $$unique $(LISP)
TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES)
$(LISP)
tags=; \
here=`pwd`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique
$(LISP) -o $$here/TAGS)
mostlyclean-tags:
clean-tags:
distclean-tags:
-rm -f TAGS ID
maintainer-clean-tags:
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
-rm -rf $(distdir)
GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
mkdir $(distdir)/=build
mkdir $(distdir)/=inst
dc_install_base=`cd $(distdir)/=inst && pwd`; \
cd $(distdir)/=build \
&& ../configure --srcdir=.. --prefix=$$dc_install_base \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) dist
-rm -rf $(distdir)
@banner="$(distdir).tar.gz is ready for distribution"; \
dashes=`echo "$$banner" | sed s/./=/g`; \
echo "$$dashes"; \
echo "$$banner"; \
echo "$$dashes"
dist: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
dist-all: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
distdir: $(DISTFILES)
-rm -rf $(distdir)
mkdir $(distdir)
-chmod 777 $(distdir)
$(mkinstalldirs) $(distdir)/glob
@for file in $(DISTFILES); do \
d=$(srcdir); \
if test -d $$d/$$file; then \
cp -pr $$/$$file $(distdir)/$$file; \
else \
test -f $(distdir)/$$file \
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|| cp -p $$d/$$file $(distdir)/$$file || :; \
fi; \
done
for subdir in $(SUBDIRS); do \
if test "$$subdir" = .; then :; else \
test -d $(distdir)/$$subdir \
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
chmod 777 $(distdir)/$$subdir; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir)
distdir=../$(distdir)/$$subdir distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)"
distdir="$(distdir)" dist-info
$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)"
distdir="$(distdir)" dist-hook
alloca.o: alloca.c config.h
ar.o: ar.c make.h config.h gettext.h filedef.h dep.h glob/fnmatch.h
arscan.o: arscan.c make.h config.h gettext.h
commands.o: commands.c make.h config.h gettext.h dep.h filedef.h \
variable.h job.h commands.h
default.o: default.c make.h config.h gettext.h rule.h dep.h filedef.h \
job.h commands.h variable.h
dir.o: dir.c make.h config.h gettext.h glob/glob.h
expand.o: expand.c make.h config.h gettext.h filedef.h job.h commands.h \
variable.h rule.h
file.o: file.c make.h config.h gettext.h dep.h filedef.h job.h \
commands.h variable.h
function.o: function.c make.h config.h gettext.h filedef.h variable.h \
dep.h job.h commands.h debug.h
getloadavg.o: getloadavg.c config.h
getopt.o: getopt.c config.h gettext.h getopt.h
getopt1.o: getopt1.c config.h getopt.h
gettext.o: gettext.c config.h gettext.h
implicit.o: implicit.c make.h config.h gettext.h rule.h dep.h filedef.h \
debug.h
job.o: job.c make.h config.h gettext.h job.h debug.h filedef.h \
commands.h variable.h
main.o: main.c make.h config.h gettext.h dep.h filedef.h variable.h \
job.h commands.h rule.h debug.h getopt.h
misc.o: misc.c make.h config.h gettext.h dep.h debug.h
read.o: read.c make.h config.h gettext.h glob/glob.h dep.h filedef.h \
job.h commands.h variable.h rule.h debug.h
remake.o: remake.c make.h config.h gettext.h filedef.h job.h commands.h \
dep.h variable.h debug.h
remote-stub.o: remote-stub.c make.h config.h gettext.h filedef.h job.h \
commands.h
rule.o: rule.c make.h config.h gettext.h dep.h filedef.h job.h \
commands.h variable.h rule.h
signame.o: signame.c make.h config.h gettext.h signame.h
variable.o: variable.c make.h config.h gettext.h dep.h filedef.h job.h \
commands.h variable.h rule.h
version.o: version.c config.h
vpath.o: vpath.c make.h config.h gettext.h filedef.h variable.h
info-am: $(INFO_DEPS)
info: info-recursive
dvi-am: $(DVIS)
dvi: dvi-recursive
check-am: all-am
$(MAKE) $(AM_MAKEFLAGS) check-local
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
all-recursive-am: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
install-exec-am: install-binPROGRAMS install-exec-local
install-exec: install-exec-recursive
install-data-am: install-info-am install-man
install-data: install-data-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am: uninstall-binPROGRAMS uninstall-info uninstall-man
uninstall: uninstall-recursive
all-am: Makefile $(INFO_DEPS) $(PROGRAMS) $(MANS) $(HEADERS) config.h \
all-local
all-redirect: all-recursive-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
$(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(infodir) \
$(DESTDIR)$(mandir)/man1
mostlyclean-generic:
-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
mostlyclean-am: mostlyclean-hdr mostlyclean-binPROGRAMS \
mostlyclean-compile mostlyclean-aminfo mostlyclean-tags \
mostlyclean-generic
mostlyclean: mostlyclean-recursive
clean-am: clean-hdr clean-binPROGRAMS clean-compile clean-aminfo \
clean-tags clean-generic mostlyclean-am
clean: clean-recursive
distclean-am: distclean-hdr distclean-binPROGRAMS distclean-compile \
distclean-aminfo distclean-tags distclean-generic \
clean-am
distclean: distclean-recursive
-rm -f config.status
maintainer-clean-am: maintainer-clean-hdr maintainer-clean-binPROGRAMS \
maintainer-clean-compile maintainer-clean-aminfo \
maintainer-clean-tags maintainer-clean-generic \
distclean-am maintainer-clean-local
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
maintainer-clean: maintainer-clean-recursive
-rm -f config.status
.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
mostlyclean-compile distclean-compile clean-compile \
maintainer-clean-compile install-info-am uninstall-info \
mostlyclean-aminfo distclean-aminfo clean-aminfo \
maintainer-clean-aminfo install-man1 uninstall-man1 install-man \
uninstall-man install-data-recursive uninstall-data-recursive \
install-exec-recursive uninstall-exec-recursive installdirs-recursive \
uninstalldirs-recursive all-recursive check-recursive \
installcheck-recursive info-recursive dvi-recursive \
mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check-local check check-am installcheck-am installcheck \
all-recursive-am install-exec-local install-exec-am install-exec \
install-data-am install-data install-am install uninstall-am uninstall \
all-local all-redirect all-am all installdirs-am installdirs \
mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean
all-local: $(srcdir)/stamp-pot
$(srcdir)/stamp-pot: $(POTFILES)
@echo "$(POTFILES)" > $@
install-exec-local:
@if $(inst_setgid); then \
app=$(DESTDIR)$(bindir)/`echo $(bin_PROGRAMS)|sed '$(transform)'`; \
if chgrp $(inst_group) $$app && chmod g+s $$app; then \
echo "chgrp $(inst_group) $$app && chmod g+s $$app"; \
else \
echo "$$app needs to be owned by group $(inst_group) and setgid;";
\
echo "otherwise the \`-l' option will probably not work."; \
echo "You may need special privileges to complete the
installation"; \
echo "of $$app."; \
fi; \
else true; fi
# --------------- Local DIST Section
# Install the w32 and tests subdirectories
#
dist-hook:
(cd $(srcdir); \
sub=`find w32 tests -follow \( -name CVS -prune -o -name work -prune
\) -o \( -name \*.orig -o -name \*.rej -o -name \*~ -prune \) -o -type f
-print`; \
tar chf - $$sub) \
| (cd $(distdir); tar xfBp -)
# --------------- Local CHECK Section
check-local: check-regression check-loadavg
@banner=" Regression PASSED: GNU Make $(VERSION) ($(MAKE_HOST)) built
with $(CC) "; \
dashes=`echo "$$banner" | sed s/./=/g`; \
echo; \
echo "$$dashes"; \
echo "$$banner"; \
echo "$$dashes"; \
echo
.PHONY: check-loadavg check-regression
# > check-loadavg
#
loadavg: loadavg.c config.h
@rm -f loadavg
$(LINK) -DTEST $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS)
$(make_LDFLAGS) loadavg.c $(LIBS)
# We copy getloadavg.c into a different file rather than compiling it
# directly because some compilers clobber getloadavg.o in the process.
#
loadavg.c: getloadavg.c
ln $(srcdir)/getloadavg.c loadavg.c || \
cp $(srcdir)/getloadavg.c loadavg.c
check-loadavg: loadavg
@echo The system uptime program believes the load average to be:
-uptime
@echo The GNU load average checking code believes:
-./loadavg
check-regression:
@if test -f "$(srcdir)/tests/run_make_tests"; then \
if $(PERL) -v >/dev/null 2>&1; then \
case `cd $(srcdir); pwd` in `pwd`) : ;; \
*) test -d tests || mkdir tests; \
rm -f srctests; \
if ln -s "$(srcdir)/tests" srctests; then \
for f in run_make_tests run_make_tests.pl test_driver.pl
scripts; do \
rm -f tests/$$f; ln -s ../srctests/$$f tests; \
done; fi ;; \
esac; \
echo "cd tests && $(PERL) ./run_make_tests.pl -make ../make
$(MAKETESTFLAGS)"; \
cd tests && $(PERL) ./run_make_tests.pl -make ../make
$(MAKETESTFLAGS); \
else \
echo "Can't find a working Perl ($(PERL)); the test suite requires
Perl."; \
fi; \
else \
echo "Can't find the GNU Make test suite ($(srcdir)/tests)."; \
fi
# --------------- Local CLEAN section
maintainer-clean-local:
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
# --------------- Maintainer's Section
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- make 3.79.1 on Cray PVPs,
Charles M. Castevens IV <=