[Commit-gnuradio] r4350 - usrp-hw/trunk/sym/generated

[matt]

Author: matt
Date: 2007-01-31 18:53:22 -0700 (Wed, 31 Jan 2007)
New Revision: 4350

Added:
   usrp-hw/trunk/sym/generated/adl5385-MIX.src
   usrp-hw/trunk/sym/generated/adl5385-PWR.src
   usrp-hw/trunk/sym/generated/lt1613.src
   usrp-hw/trunk/sym/generated/nb6l239-CLK.src
   usrp-hw/trunk/sym/generated/nb6l239-CTRL.src
   usrp-hw/trunk/sym/generated/nb6l239-PWR.src
Modified:
   usrp-hw/trunk/sym/generated/Makefile
Log:
new parts


Modified: usrp-hw/trunk/sym/generated/Makefile
===================================================================
--- usrp-hw/trunk/sym/generated/Makefile        2007-01-31 23:13:57 UTC (rev 
4349)
+++ usrp-hw/trunk/sym/generated/Makefile        2007-02-01 01:53:22 UTC (rev 
4350)
@@ -158,7 +158,13 @@
        cy7c1356cv25-bz-PWR.sym \
        cy7c1356cv25-bz-CTRL.sym \
        cy7c1356cv25-bz-RAM.sym \
-       ipass-sas-x4.sym
+       ipass-sas-x4.sym \
+       adl5385-PWR.sym \
+       adl5385-MIX.sym \
+       nb6l239-PWR.sym \
+       nb6l239-CLK.sym \
+       nb6l239-CTRL.sym \
+       lt1613.sym
 
 
 all : $(SOURCES)

Added: usrp-hw/trunk/sym/generated/adl5385-MIX.src
===================================================================
--- usrp-hw/trunk/sym/generated/adl5385-MIX.src                         (rev 0)
+++ usrp-hw/trunk/sym/generated/adl5385-MIX.src 2007-02-01 01:53:22 UTC (rev 
4350)
@@ -0,0 +1,57 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=no
+sort_labels=no
+generate_pinseq=yes
+sym_width=1400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=ADL5385-MIX
+device=ADL5385
+refdes=U?
+footprint=LFCSP24
+description=Analog Devices Quadrature Modulator
+documentation=http://www.analog.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=Part 2 of 2
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel. 
+#      negation lines can be added with _Q_ 
+#      if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq     type    style   posit.  net     label   
+#-----------------------------------------------------
+13             in      line    l               IBBP
+14             in      dot     l               \_IBBN\_
+18             in      line    l               QBBP
+17             in      dot     l               \_QBBN\_
+7              out     line    r               VOUT
+21             in      line    l               LOIP
+22             in      dot     l               \_LOIN\_

Added: usrp-hw/trunk/sym/generated/adl5385-PWR.src
===================================================================
--- usrp-hw/trunk/sym/generated/adl5385-PWR.src                         (rev 0)
+++ usrp-hw/trunk/sym/generated/adl5385-PWR.src 2007-02-01 01:53:22 UTC (rev 
4350)
@@ -0,0 +1,72 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=no
+sort_labels=no
+generate_pinseq=yes
+sym_width=1400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=ADL5385-PWR
+device=ADL5385
+refdes=U?
+footprint=LFCSP24
+description=Analog Devices Quadrature Modulator
+documentation=http://www.analog.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=Part 1 of 2
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel. 
+#      negation lines can be added with _Q_ 
+#      if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq     type    style   posit.  net     label   
+#-----------------------------------------------------
+4              pwr     line    r               COM1
+5              pwr     line    r               COM1
+6              pwr     line    r               COM1
+15             pwr     line    r               COM2
+16             pwr     line    r               COM2
+19             pwr     line    r               COM3
+20             pwr     line    r               COM3
+
+1              pas     line    b               NC/GND
+2              pas     line    b               NC/GND
+3              pas     line    b               NC/GND
+
+8              pwr     line    l               VPS1
+9              pwr     line    l               VPS1
+11             pwr     line    l               VPS2
+23             pwr     line    l               VPS3
+24             pwr     line    l               VPS3
+
+
+12             in      line    l               ENBL
+
+10             out     line    b               TEMP

Added: usrp-hw/trunk/sym/generated/lt1613.src
===================================================================
--- usrp-hw/trunk/sym/generated/lt1613.src                              (rev 0)
+++ usrp-hw/trunk/sym/generated/lt1613.src      2007-02-01 01:53:22 UTC (rev 
4350)
@@ -0,0 +1,55 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=no
+sort_labels=no
+generate_pinseq=yes
+sym_width=1400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=LT1613CS5
+device=LT1613CS5
+refdes=U?
+footprint=SOT23-5
+description=Linear Tech Adj. Buck Regulator
+documentation=NA
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel. 
+#      negation lines can be added with _Q_ 
+#      if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq     type    style   posit.  net     label   
+#-----------------------------------------------------
+1              pwr     line    r               SW
+2              pwr     line    b               GND
+3              in      line    r               FB
+5              pwr     line    l               Vin
+4              in      dot     l               \_SHDN\_

Added: usrp-hw/trunk/sym/generated/nb6l239-CLK.src
===================================================================
--- usrp-hw/trunk/sym/generated/nb6l239-CLK.src                         (rev 0)
+++ usrp-hw/trunk/sym/generated/nb6l239-CLK.src 2007-02-01 01:53:22 UTC (rev 
4350)
@@ -0,0 +1,59 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=no
+sort_labels=no
+generate_pinseq=yes
+sym_width=1400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=NB6L239-CLK
+device=NB6L239
+refdes=U?
+footprint=QFN16EP
+description=On Semi Clock Divider
+documentation=http://www.onsemi.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=Part 1 of 3
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel. 
+#      negation lines can be added with _Q_ 
+#      if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq     type    style   posit.  net     label   
+#-----------------------------------------------------
+1              in      line    l               VT
+2              in      clk     l               CLK
+3              in      dotclk  l               \_CLK\_
+4              out     line    l               Vbbac
+12             out     line    r               QA
+11             out     dot     r               \_QA\_
+10             out     line    r               QB
+9              out     dot     r               \_QB\_
+

Added: usrp-hw/trunk/sym/generated/nb6l239-CTRL.src
===================================================================
--- usrp-hw/trunk/sym/generated/nb6l239-CTRL.src                                
(rev 0)
+++ usrp-hw/trunk/sym/generated/nb6l239-CTRL.src        2007-02-01 01:53:22 UTC 
(rev 4350)
@@ -0,0 +1,56 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=no
+sort_labels=no
+generate_pinseq=yes
+sym_width=1400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=NB6L239-CTRL
+device=NB6L239
+refdes=U?
+footprint=QFN16EP
+description=On Semi Clock Divider
+documentation=http://www.onsemi.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=Part 3 of 3
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel. 
+#      negation lines can be added with _Q_ 
+#      if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq     type    style   posit.  net     label   
+#-----------------------------------------------------
+15             in      line    l               SELA0
+14             in      line    l               SELA1
+6              in      line    l               SELB0
+7              in      line    l               SELB1
+5              in      dot     r               \_EN\_
+16             in      dot     r               \_MR\_

Added: usrp-hw/trunk/sym/generated/nb6l239-PWR.src
===================================================================
--- usrp-hw/trunk/sym/generated/nb6l239-PWR.src                         (rev 0)
+++ usrp-hw/trunk/sym/generated/nb6l239-PWR.src 2007-02-01 01:53:22 UTC (rev 
4350)
@@ -0,0 +1,53 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=no
+sort_labels=no
+generate_pinseq=yes
+sym_width=1400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=NB6L239-PWR
+device=NB6L239
+refdes=U?
+footprint=QFN16EP
+description=On Semi Clock Divider
+documentation=http://www.onsemi.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=Part 2 of 3
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel. 
+#      negation lines can be added with _Q_ 
+#      if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq     type    style   posit.  net     label   
+#-----------------------------------------------------
+13             pwr     line    l               Vcc
+8              pwr     line    r               Vee
+17             pwr     line    r               GND_EP