[Commit-gnuradio] r10171 - usrp-hw/trunk/sym/generated

[matt]

Author: matt
Date: 2008-12-26 17:56:08 -0700 (Fri, 26 Dec 2008)
New Revision: 10171

Added:
   usrp-hw/trunk/sym/generated/ads62p4x-CTRL.src
   usrp-hw/trunk/sym/generated/ads62p4x-PWR.src
   usrp-hw/trunk/sym/generated/ads62p4x-lvds-ADC.src
Modified:
   usrp-hw/trunk/sym/generated/Makefile
Log:
new adc


Modified: usrp-hw/trunk/sym/generated/Makefile
===================================================================
--- usrp-hw/trunk/sym/generated/Makefile        2008-12-27 00:55:50 UTC (rev 
10170)
+++ usrp-hw/trunk/sym/generated/Makefile        2008-12-27 00:56:08 UTC (rev 
10171)
@@ -212,6 +212,16 @@
        adl5375-PWR.sym \
        spi-flash-so16.sym \
        ltc64x0-xx.sym \
+       ads62p4x-lvds-ADC.sym \
+       ads62p4x-PWR.sym \
+       ads62p4x-CTRL.sym \
+       et1011c2-PWR.sym \
+       et1011c2-CFGLED.sym \
+       et1011c2-MDI.sym \
+       et1011c2-MGT.sym \
+       et1011c2-GMII.sym \
+       et1011c2-JTAG.sym \
+       et1011c2-CLK.sym \
        lt55x4.sym
 
 

Added: usrp-hw/trunk/sym/generated/ads62p4x-CTRL.src
===================================================================
--- usrp-hw/trunk/sym/generated/ads62p4x-CTRL.src                               
(rev 0)
+++ usrp-hw/trunk/sym/generated/ads62p4x-CTRL.src       2008-12-27 00:56:08 UTC 
(rev 10171)
@@ -0,0 +1,60 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=no
+generate_pinseq=yes
+sym_width=1800
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=LTC2284-CTRL
+device=LTC2284
+refdes=U?
+footprint=QFN64
+description=Linear Technology Dual 14-bit 105 MS/s ADC
+documentation=NA
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=Part 2 of 3
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel. 
+#      negation lines can be added with _Q_ 
+#      if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq     type    style   posit.  net     label   
+#-----------------------------------------------------
+23             in      line    r               VCM
+12             in      line    r               RESET
+35             in      line    r               CTRL1
+36             in      line    r               CTRL2
+37             in      line    r               CTRL3
+15             in      line    l               SEN
+14             in      line    l               SDATA
+13             in      clk     l               SCLK
+

Added: usrp-hw/trunk/sym/generated/ads62p4x-PWR.src
===================================================================
--- usrp-hw/trunk/sym/generated/ads62p4x-PWR.src                                
(rev 0)
+++ usrp-hw/trunk/sym/generated/ads62p4x-PWR.src        2008-12-27 00:56:08 UTC 
(rev 10171)
@@ -0,0 +1,75 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=no
+generate_pinseq=yes
+sym_width=1800
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=ADS62P4X-LVDS-PWR
+device=ADS62P4X
+refdes=U?
+footprint=QFN64
+description=TI Dual 14-bit 125/105/80/65 MS/s ADC
+documentation=NA
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=Part 1 of 3
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel. 
+#      negation lines can be added with _Q_ 
+#      if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq     type    style   posit.  net     label   
+#-----------------------------------------------------
+16             pwr     line    l               AVDD
+33             pwr     line    l               AVDD
+34             pwr     line    l               AVDD
+
+17             pwr     line    r               AGND
+18             pwr     line    r               AGND
+21             pwr     line    r               AGND
+22             pwr     line    r               AGND
+24             pwr     line    r               AGND
+27             pwr     line    r               AGND
+28             pwr     line    r               AGND
+31             pwr     line    r               AGND
+32             pwr     line    r               AGND
+
+1              pwr     line    l               DRVDD
+38             pwr     line    l               DRVDD
+48             pwr     line    l               DRVDD
+58             pwr     line    l               DRVDD
+
+39             pwr     line    r               DRGND
+49             pwr     line    r               DRGND
+59             pwr     line    r               DRGND
+64             pwr     line    r               DRGND
+65             pwr     line    r               DRGND

Added: usrp-hw/trunk/sym/generated/ads62p4x-lvds-ADC.src
===================================================================
--- usrp-hw/trunk/sym/generated/ads62p4x-lvds-ADC.src                           
(rev 0)
+++ usrp-hw/trunk/sym/generated/ads62p4x-lvds-ADC.src   2008-12-27 00:56:08 UTC 
(rev 10171)
@@ -0,0 +1,89 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=no
+generate_pinseq=yes
+sym_width=1800
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=ADS62P4X-LVDS-ADC
+device=ADS62P4X
+refdes=U?
+footprint=QFN64
+description=TI Dual 14-bit 125/105/80/65 MS/s ADC
+documentation=NA
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=Part 3 of 3
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel. 
+#      negation lines can be added with _Q_ 
+#      if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq     type    style   posit.  net     label   
+#-----------------------------------------------------
+
+
+29             in      line    l               INP_A
+30             in      dot     l               \_INN_A\_
+19             in      line    l               INP_B
+20             in      dot     l               \_INN_B\_
+41             out     line    r               DA_0_1_P
+40             out     dot     r               \_DA_0_1_N\_
+43             out     line    r               DA_2_3_P
+42             out     dot     r               \_DA_2_3_N\_
+45             out     line    r               DA_4_5_P
+44             out     dot     r               \_DA_4_5_N\_
+47             out     line    r               DA_6_7_P
+46             out     dot     r               \_DA_6_7_N\_
+51             out     line    r               DA_8_9_P
+50             out     dot     r               \_DA_8_9_N\_
+53             out     line    r               DA_10_11_P
+52             out     dot     r               \_DA_10_11_N\_
+55             out     line    r               DA_12_13_P
+54             out     dot     r               \_DA_12_13_N\_
+61             out     line    r               DB_0_1_P
+60             out     dot     r               \_DB_0_1_N\_
+63             out     line    r               DB_2_3_P
+62             out     dot     r               \_DB_2_3_N\_
+3              out     line    r               DB_4_5_P
+2              out     dot     r               \_DB_4_5_N\_
+5              out     line    r               DB_6_7_P
+4              out     dot     r               \_DB_6_7_N\_
+7              out     line    r               DB_8_9_P
+6              out     dot     r               \_DB_8_9_N\_
+9              out     line    r               DB_10_11_P
+8              out     dot     r               \_DB_10_11_N\_
+11             out     line    r               DB_12_13_P
+10             out     dot     r               \_DB_12_13_N\_
+25             in      clk     l               CLKinP
+26             in      dotclk  l               \_CLKinN\_
+57             out     clk     r               CLKoutP
+56             out     dotclk  r               \_CLKoutN\_