commit-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Commit-gnuradio] r10473 - usrp-hw/trunk/sym/generated


From: matt
Subject: [Commit-gnuradio] r10473 - usrp-hw/trunk/sym/generated
Date: Sat, 21 Feb 2009 17:19:57 -0700 (MST)

Author: matt
Date: 2009-02-21 17:19:55 -0700 (Sat, 21 Feb 2009)
New Revision: 10473

Added:
   usrp-hw/trunk/sym/generated/sn74aup1t57.src
Modified:
   usrp-hw/trunk/sym/generated/Makefile
Log:
level translator


Modified: usrp-hw/trunk/sym/generated/Makefile
===================================================================
--- usrp-hw/trunk/sym/generated/Makefile        2009-02-21 04:55:11 UTC (rev 
10472)
+++ usrp-hw/trunk/sym/generated/Makefile        2009-02-22 00:19:55 UTC (rev 
10473)
@@ -247,6 +247,7 @@
        sky73202-PWR.sym \
        sky73202-SIG.sym \
        sky73202-CTRL.sym \
+       sn74aup1t57.sym \
        lt55x4.sym
 
 

Added: usrp-hw/trunk/sym/generated/sn74aup1t57.src
===================================================================
--- usrp-hw/trunk/sym/generated/sn74aup1t57.src                         (rev 0)
+++ usrp-hw/trunk/sym/generated/sn74aup1t57.src 2009-02-22 00:19:55 UTC (rev 
10473)
@@ -0,0 +1,57 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=no
+generate_pinseq=yes
+sym_width=1400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=SN74AUP1T57
+device=SN74AUP1T57
+refdes=U?
+footprint=DBV
+description=Level translator
+documentation=www.ti.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+#comment=
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel. 
+#      negation lines can be added with _Q_ 
+#      if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq     type    style   posit.  net     label   
+#-----------------------------------------------------
+3              in      line    l               A
+1              in      line    l               B
+6              in      line    l               C
+4              out     line    r               Y
+5              pwr     line    b               Vcc
+2              pwr     line    b               GND





reply via email to

[Prev in Thread] Current Thread [Next in Thread]