coreutils
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH] build: do not require help2man at build-from-tarball time


From: Jim Meyering
Subject: Re: [PATCH] build: do not require help2man at build-from-tarball time
Date: Thu, 25 Oct 2012 15:37:28 +0200

Stefano Lattarini wrote:
...
> Here is the updated patch.  Sorry for the noise,
>   Stefano
>
> ----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<----
>
>>From f61dcb763975c1aab299fa9678ea180d70db6acf Mon Sep 17 00:00:00 2001
> Message-Id: <address@hidden>
> From: Stefano Lattarini <address@hidden>
> Date: Tue, 11 Sep 2012 20:54:30 +0200
> Subject: [PATCH] build: graceful degradation in man pages generation if perl

Thanks.  That looks good.
I've made some minor changes.  Here's an incremental:

diff --git a/man/dummy-man b/man/dummy-man
index 2e32320..633a5ba 100755
--- a/man/dummy-man
+++ b/man/dummy-man
@@ -1,7 +1,7 @@
 #!/bin/sh
-# Poor placeholder for help2man invocation on systems lacking perl;
-# it generates a dummy manpage stating that as proper manpage could
-# not be generated, and redirecting the user back to either the info
+# Poor man's placeholder for help2man invocation on systems lacking perl;
+# it generates a dummy man page stating that a proper one could not be
+# generated, and redirecting the user back to either the info
 # documentation or the '--help' output.

 set -e; set -u
@@ -42,8 +42,8 @@ test $# -le 1 || fatal_ "too many non-option arguments"

 baseout=`basename_ "$output"`
 sed 's/^/WARNING: /' >&2 <<END
-Cannot create proper man page '$baseout' since perl is missing or
-inadequate on this system.  Will create a stub man page instead.
+Cannot create proper '$baseout' man page, since perl is missing or
+inadequate on this system.  Creating a stub man page instead.
 END

 progname=`basename_ "$1"`
@@ -53,20 +53,20 @@ bs='\'
 cat >"$output" <<END
 .TH "$progname" 1 "$year" "$source" "User Commands"
 .SH NAME
-$progname $bs- a GNU coreutils program
+$progname $bs- a $source program
 .SH DESCRIPTION
 .B OOOPS!
-Due to lack of perl on your system, the GNU coreutils build system
-hasn't been able to create the manual page for
+Due to lack of perl on your system, the $source build system
+failed to create the manual page for
 .B $progname.
-For a quick help about that program, try running
+For concise option descriptions, run
 .IP
 .B env $progname --help
 .PP
 The full documentation for
 .B $progname
-is maintained as a Texinfo manual, which you might be accessible
-on your system with the command
+is maintained as a Texinfo manual, which should be accessible
+on your system via the command
 .IP
 .B info coreutils $bs(aq$progname invocation$bs(aq
 END

Here is the merged result, also with an adjusted log.  Ok?

----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<----
>From 6f64d745fb2ce525a056b016ef4ada66416c9e8d Mon Sep 17 00:00:00 2001
From: Stefano Lattarini <address@hidden>
Date: Tue, 11 Sep 2012 20:54:30 +0200
Subject: [PATCH] build: graceful degradation in man pages generation if perl
 is lacking

Since commit v8.19-118-g57da212, our 'dist-hook' rule tweaks the
distributed Makefile.in so that each man page 'man/foo.1' depends
on the corresponding source 'src/foo.c' rather than the corresponding
program 'src/foo'.  That is done to accommodate inferior systems that,
lacking perl, cannot run help2man to regenerate the manpage after
its corresponding program has been built.

This seems a right and proper graceful degradation, in that the
man pages dependencies are still 100% correct in a git checkout,
while being laxer but "more portable" in a distribution tarball.

Alas, that is not the case in practice, as it turns out the tweaked
Makefile makes the building of man pages unreliable and potentially
incorrect!

In fact, assume that instead of the correct a dependency:

    man/ls.1: src/ls

we have the laxer one:

    man/ls.1: src/ls.c

and think of what happens if a user modifies, say, 'src/ls.c', and then
runs "make -j4" to rebuild everything.  The make process will see that
it has to rebuild the man page 'man/ls.1' (because its prerequisite
'src/ls.c' has changed), but won't see that it has to rebuild 'src/ls'
*before* re-running 'help2man' to generate that man page; so, if
'man/ls.1' is rebuilt before 'src/ls' (which can happen with concurrent
make), our user will get either a build error (if 'src/ls' did non
exist) or, worse, a man page with an up-to-date timestamp but an
out-of-date content.  And what's even worse in all of this is that
this problem will be present also for users who have perl installed:
this is not a "graceful degradation" at all!

In our situation, the best and simplest way to implement a graceful
degradation it to keep the correct dependencies for man pages (that
is, "man/ls.1: src/ls"), and if perl is not present, just generate
dummy man pages reporting that built-time issue and redirecting the
user back to either the info documentation or the '--help' output.

As a consequence of this change, we also stop distributing man pages,
since they will now be generated unconditionally.

* Makefile.am (do-not-require-help2man): Remove.
(dist-hook): Don't depend on it.
* man/local.mk: Remove an obsolete comment.
(EXTRA_DIST): Stop distributing generated man pages.
($(EXTRA_MANS)): This no longer needs to depend on $(all_programs).
(MAINTAINERCLEANFILES): $(ALL_MANS) Do not list it here, and ...
(CLEANFILES): ... list it here, instead.
(.x.1): Instead of warning if perl is missing, but then trying to run
'help2man' unconditionally, simply run ...
(run_help2man): ... the command referenced by this new variable, that
expands to a proper invocation of 'help2man' if perl is present, and
to an invocation of a shell script generating a dummy manpage if it
is not.
(EXTRA_DIST): Distribute that shell script.
* man/dummy-man: New shell script.
Fixes coreutils http://bugs.gnu.org/12715.
---
 Makefile.am   | 20 +----------------
 man/dummy-man | 72 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 man/local.mk  | 25 +++++++++++----------
 3 files changed, 86 insertions(+), 31 deletions(-)
 create mode 100755 man/dummy-man

diff --git a/Makefile.am b/Makefile.am
index 0232090..5eaa45b 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -93,29 +93,11 @@ BUILT_SOURCES = .version
 .version:
        $(AM_V_GEN)echo $(VERSION) > $@-t && mv $@-t $@

-# In general, we run help2man to build a man page from the binary's --help
-# output, but when building from a just-unpacked distribution tarball, we
-# must not do that, since help2man uses perl.  We don't want to depend on
-# perl in that case.  In general, the .1 file does indeed depend on the
-# binary.  I.e., for cat, we have this Makefile dependency:
-#   man/cat.1: src/cat
-# That means that once we build src/cat, we would trigger the .x.1
-# rule which runs help2man.  The trick is simply to change the RHS to
-# "src/cat.c" in the $(distdir) that we're about to tar and compress.
-# Also handle the three exceptions corresponding to the three binaries
-# for which there is no like-named .c file: dir, vdir, ginstall.
-.PHONY: do-not-require-help2man
-do-not-require-help2man:
-       perl -pi -e 's,^(man/.+?\.1:\s*src/.+?)$$,$$1.c,;'              \
-           -e  's,^(man/.+?\.1:\s*src)/ginstall\.c$$,$$1/install.c,;'  \
-           -e  's,^(man/.+?\.1:\s*src)/v?dir\.c$$,$$1/ls.c,;'          \
-          $(distdir)/Makefile.in
-
 # Arrange so that .tarball-version appears only in the distribution
 # tarball, and never in a checked-out repository.
 # The perl substitution is to change some key uses of "rm" to "/bin/rm".
 # See the rm_subst comment for details.
-dist-hook: gen-ChangeLog do-not-require-help2man
+dist-hook: gen-ChangeLog
        $(AM_V_GEN)echo $(VERSION) > $(distdir)/.tarball-version
        $(AM_V_at)perl -pi -e '$(rm_subst)' $(distdir)/Makefile.in

diff --git a/man/dummy-man b/man/dummy-man
new file mode 100755
index 0000000..633a5ba
--- /dev/null
+++ b/man/dummy-man
@@ -0,0 +1,72 @@
+#!/bin/sh
+# Poor man's placeholder for help2man invocation on systems lacking perl;
+# it generates a dummy man page stating that a proper one could not be
+# generated, and redirecting the user back to either the info
+# documentation or the '--help' output.
+
+set -e; set -u
+
+fatal_ ()
+{
+  printf '%s: %s\n' "$0" "$*" >&2
+  exit 1
+}
+
+basename_ ()
+{
+  printf '%s\n' "$1" | sed 's,.*/,,'
+}
+
+output=
+source="GNU coreutils"
+while test $# -gt 0; do
+  case $1 in
+    # Help2man options we recognize and handle.
+    --output=*) output=`expr x"$1" : x'--output=\(.*\)'`;;
+    --output) shift; output=$1;;
+    --source=*) source=`expr x"$1" : x'--source=\(.*\)'`;;
+    --source) shift; source=$1;;
+    # Recognize (as no-op) other help2man options that might be used
+    # in the makefile.
+    --include=*);;
+    --include) shift;;
+    -*) fatal_ "invalid or unrecognized help2man option '$1'";;
+    --) shift; break;;
+     *) break;;
+  esac
+  shift
+done
+
+test $# -gt 0 || fatal_ "missing argument"
+test $# -le 1 || fatal_ "too many non-option arguments"
+
+baseout=`basename_ "$output"`
+sed 's/^/WARNING: /' >&2 <<END
+Cannot create proper '$baseout' man page, since perl is missing or
+inadequate on this system.  Creating a stub man page instead.
+END
+
+progname=`basename_ "$1"`
+year=`LC_ALL=C date +%Y`
+bs='\'
+
+cat >"$output" <<END
+.TH "$progname" 1 "$year" "$source" "User Commands"
+.SH NAME
+$progname $bs- a $source program
+.SH DESCRIPTION
+.B OOOPS!
+Due to lack of perl on your system, the $source build system
+failed to create the manual page for
+.B $progname.
+For concise option descriptions, run
+.IP
+.B env $progname --help
+.PP
+The full documentation for
+.B $progname
+is maintained as a Texinfo manual, which should be accessible
+on your system via the command
+.IP
+.B info coreutils $bs(aq$progname invocation$bs(aq
+END
diff --git a/man/local.mk b/man/local.mk
index ebc111d..2c05bb6 100644
--- a/man/local.mk
+++ b/man/local.mk
@@ -16,17 +16,24 @@
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.

-EXTRA_DIST += man/help2man
+EXTRA_DIST += man/help2man man/dummy-man
+
+## Graceful degradation for systems lacking perl.
+if HAVE_PERL
+run_help2man = $(PERL) -- $(srcdir)/man/help2man
+else
+run_help2man = $(SHELL) $(srcdir)/man/dummy-man
+endif

 man1_MANS = @man1_MANS@
-EXTRA_DIST += $(man1_MANS) $(man1_MANS:.1=.x)
+EXTRA_DIST += $(man1_MANS:.1=.x)

 EXTRA_MANS = @EXTRA_MANS@
-EXTRA_DIST += $(EXTRA_MANS) $(EXTRA_MANS:.1=.x)
+EXTRA_DIST += $(EXTRA_MANS:.1=.x)

 ALL_MANS = $(man1_MANS) $(EXTRA_MANS)

-MAINTAINERCLEANFILES += $(ALL_MANS)
+CLEANFILES += $(ALL_MANS)

 # This is required because we have subtle inter-directory dependencies:
 # in order to generate all man pages, even those for which we don't
@@ -161,13 +168,7 @@ man/whoami.1:    src/whoami
 man/yes.1:       src/yes

 .x.1:
-       $(AM_V_GEN)case '$(PERL)' in                            \
-         *"/missing "*)                                        \
-           echo 'WARNING: cannot update man page $@ since perl is missing' \
-             'or inadequate' 1>&2                              \
-           exit 0;;                                            \
-       esac; \
-       name=`echo $@ | sed -e 's|.*/||' -e 's|\.1$$||'` || exit 1;     \
+       $(AM_V_GEN)name=`echo $@ | sed 's|.*/||; s|\.1$$||'` || exit 1; \
 ## Ensure that help2man runs the 'src/ginstall' binary as 'install' when
 ## creating 'install.1'.  Similarly, ensure that it uses the 'src/[' binary
 ## to create 'test.1'.
@@ -184,7 +185,7 @@ man/yes.1:       src/yes
          && rm -rf $$t                                                 \
          && $(MKDIR_P) $$t                                             \
          && (cd $$t && $(LN_S) '$(abs_top_builddir)/src/'$$prog $$name) \
-         && $(PERL) -- $(srcdir)/man/help2man                          \
+         && $(run_help2man)                                            \
                     --source='$(PACKAGE_STRING)'                       \
                     --include=$(srcdir)/man/$$name.x                   \
                     --output=$$t/$$name.1 $$t/$$name                   \
--
1.8.0



reply via email to

[Prev in Thread] Current Thread [Next in Thread]