[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Cvs-cvs] Changes to ccvs/lib/regex.h
From: |
Derek Robert Price |
Subject: |
[Cvs-cvs] Changes to ccvs/lib/regex.h |
Date: |
Sun, 04 Sep 2005 01:59:03 -0400 |
Index: ccvs/lib/regex.h
diff -u ccvs/lib/regex.h:1.9 ccvs/lib/regex.h:1.10
--- ccvs/lib/regex.h:1.9 Fri Aug 12 20:58:10 2005
+++ ccvs/lib/regex.h Sun Sep 4 05:58:56 2005
@@ -1,6 +1,6 @@
/* Definitions for data structures and routines for the regular
expression library.
- Copyright (C) 1985,1989-93,1995-98,2000,2001,2002,2003
+ Copyright (C) 1985,1989-93,1995-98,2000,2001,2002,2003,2005
Free Software Foundation, Inc.
This file is part of the GNU C Library.
@@ -28,15 +28,61 @@
extern "C" {
#endif
-/* POSIX says that <sys/types.h> must be included (by the caller) before
- <regex.h>. */
+/* Define _REGEX_SOURCE to get definitions that are incompatible with
+ POSIX. */
+#if (!defined _REGEX_SOURCE \
+ && (defined _GNU_SOURCE \
+ || (!defined _POSIX_C_SOURCE && !defined _POSIX_SOURCE \
+ && !defined _XOPEN_SOURCE)))
+# define _REGEX_SOURCE 1
+#endif
-#if !defined _POSIX_C_SOURCE && !defined _POSIX_SOURCE && defined VMS
+#if defined _REGEX_SOURCE && defined VMS
/* VMS doesn't have `size_t' in <sys/types.h>, even though POSIX says it
should be there. */
# include <stddef.h>
#endif
+#ifdef _REGEX_LARGE_OFFSETS
+
+/* Use types and values that are wide enough to represent signed and
+ unsigned byte offsets in memory. This currently works only when
+ the regex code is used outside of the GNU C library; it is not yet
+ supported within glibc itself, and glibc users should not define
+ _REGEX_LARGE_OFFSETS. */
+
+/* The type of the offset of a byte within a string.
+ For historical reasons POSIX 1003.1-2004 requires that regoff_t be
+ at least as wide as off_t. This is a bit odd (and many common
+ POSIX platforms set it to the more-sensible ssize_t) but we might
+ as well conform. We don't know of any hosts where ssize_t is wider
+ than off_t, so off_t is safe. */
+typedef off_t regoff_t;
+
+/* The type of nonnegative object indexes. Traditionally, GNU regex
+ uses 'int' for these. Code that uses __re_idx_t should work
+ regardless of whether the type is signed. */
+typedef size_t __re_idx_t;
+
+/* The type of object sizes. */
+typedef size_t __re_size_t;
+
+/* The type of object sizes, in places where the traditional code
+ uses unsigned long int. */
+typedef size_t __re_long_size_t;
+
+#else
+
+/* Use types that are binary-compatible with the traditional GNU regex
+ implementation, which mishandles strings longer than INT_MAX. */
+
+typedef int regoff_t;
+typedef int __re_idx_t;
+typedef unsigned int __re_size_t;
+typedef unsigned long int __re_long_size_t;
+
+#endif
+
/* The following two types have to be signed and unsigned integer type
wide enough to hold a value of a pointer. For most ANSI compilers
ptrdiff_t and size_t should be likely OK. Still size of these two
@@ -53,18 +99,18 @@
/* If this bit is not set, then \ inside a bracket expression is literal.
If set, then such a \ quotes the following character. */
-#define RE_BACKSLASH_ESCAPE_IN_LISTS ((unsigned long int) 1)
+#define REG_BACKSLASH_ESCAPE_IN_LISTS 1ul
/* If this bit is not set, then + and ? are operators, and \+ and \? are
literals.
If set, then \+ and \? are operators and + and ? are literals. */
-#define RE_BK_PLUS_QM (RE_BACKSLASH_ESCAPE_IN_LISTS << 1)
+#define REG_BK_PLUS_QM (1ul << 1)
/* If this bit is set, then character classes are supported. They are:
[:alpha:], [:upper:], [:lower:], [:digit:], [:alnum:], [:xdigit:],
[:space:], [:print:], [:punct:], [:graph:], and [:cntrl:].
If not set, then character classes are not supported. */
-#define RE_CHAR_CLASSES (RE_BK_PLUS_QM << 1)
+#define REG_CHAR_CLASSES (1ul << 2)
/* If this bit is set, then ^ and $ are always anchors (outside bracket
expressions, of course).
@@ -74,11 +120,11 @@
$ is an anchor if it is at the end of a regular expression, or
before a close-group or an alternation operator.
- This bit could be (re)combined with RE_CONTEXT_INDEP_OPS, because
+ This bit could be (re)combined with REG_CONTEXT_INDEP_OPS, because
POSIX draft 11.2 says that * etc. in leading positions is undefined.
We already implemented a previous draft which made those constructs
invalid, though, so we haven't changed the code back. */
-#define RE_CONTEXT_INDEP_ANCHORS (RE_CHAR_CLASSES << 1)
+#define REG_CONTEXT_INDEP_ANCHORS (1ul << 3)
/* If this bit is set, then special characters are always special
regardless of where they are in the pattern.
@@ -86,71 +132,70 @@
some contexts; otherwise they are ordinary. Specifically,
* + ? and intervals are only special when not after the beginning,
open-group, or alternation operator. */
-#define RE_CONTEXT_INDEP_OPS (RE_CONTEXT_INDEP_ANCHORS << 1)
+#define REG_CONTEXT_INDEP_OPS (1ul << 4)
/* If this bit is set, then *, +, ?, and { cannot be first in an re or
immediately after an alternation or begin-group operator. */
-#define RE_CONTEXT_INVALID_OPS (RE_CONTEXT_INDEP_OPS << 1)
+#define REG_CONTEXT_INVALID_OPS (1ul << 5)
/* If this bit is set, then . matches newline.
If not set, then it doesn't. */
-#define RE_DOT_NEWLINE (RE_CONTEXT_INVALID_OPS << 1)
+#define REG_DOT_NEWLINE (1ul << 6)
/* If this bit is set, then . doesn't match NUL.
If not set, then it does. */
-#define RE_DOT_NOT_NULL (RE_DOT_NEWLINE << 1)
+#define REG_DOT_NOT_NULL (1ul << 7)
/* If this bit is set, nonmatching lists [^...] do not match newline.
If not set, they do. */
-#define RE_HAT_LISTS_NOT_NEWLINE (RE_DOT_NOT_NULL << 1)
+#define REG_HAT_LISTS_NOT_NEWLINE (1ul << 8)
/* If this bit is set, either \{...\} or {...} defines an
- interval, depending on RE_NO_BK_BRACES.
+ interval, depending on REG_NO_BK_BRACES.
If not set, \{, \}, {, and } are literals. */
-#define RE_INTERVALS (RE_HAT_LISTS_NOT_NEWLINE << 1)
+#define REG_INTERVALS (1ul << 9)
/* If this bit is set, +, ? and | aren't recognized as operators.
If not set, they are. */
-#define RE_LIMITED_OPS (RE_INTERVALS << 1)
+#define REG_LIMITED_OPS (1ul << 10)
/* If this bit is set, newline is an alternation operator.
If not set, newline is literal. */
-#define RE_NEWLINE_ALT (RE_LIMITED_OPS << 1)
+#define REG_NEWLINE_ALT (1ul << 11)
/* If this bit is set, then `{...}' defines an interval, and \{ and \}
are literals.
If not set, then `\{...\}' defines an interval. */
-#define RE_NO_BK_BRACES (RE_NEWLINE_ALT << 1)
+#define REG_NO_BK_BRACES (1ul << 12)
/* If this bit is set, (...) defines a group, and \( and \) are literals.
If not set, \(...\) defines a group, and ( and ) are literals. */
-#define RE_NO_BK_PARENS (RE_NO_BK_BRACES << 1)
+#define REG_NO_BK_PARENS (1ul << 13)
/* If this bit is set, then \<digit> matches <digit>.
If not set, then \<digit> is a back-reference. */
-#define RE_NO_BK_REFS (RE_NO_BK_PARENS << 1)
+#define REG_NO_BK_REFS (1ul << 14)
/* If this bit is set, then | is an alternation operator, and \| is literal.
If not set, then \| is an alternation operator, and | is literal. */
-#define RE_NO_BK_VBAR (RE_NO_BK_REFS << 1)
+#define REG_NO_BK_VBAR (1ul << 15)
/* If this bit is set, then an ending range point collating higher
than the starting range point, as in [z-a], is invalid.
- If not set, then when ending range point collates higher than the
- starting range point, the range is ignored. */
-#define RE_NO_EMPTY_RANGES (RE_NO_BK_VBAR << 1)
+ If not set, the containing range is empty and does not match any string. */
+#define REG_NO_EMPTY_RANGES (1ul << 16)
/* If this bit is set, then an unmatched ) is ordinary.
If not set, then an unmatched ) is invalid. */
-#define RE_UNMATCHED_RIGHT_PAREN_ORD (RE_NO_EMPTY_RANGES << 1)
+#define REG_UNMATCHED_RIGHT_PAREN_ORD (1ul << 17)
/* If this bit is set, succeed as soon as we match the whole pattern,
without further backtracking. */
-#define RE_NO_POSIX_BACKTRACKING (RE_UNMATCHED_RIGHT_PAREN_ORD << 1)
+#define REG_NO_POSIX_BACKTRACKING (1ul << 18)
/* If this bit is set, do not process the GNU regex operators.
If not set, then the GNU regex operators are recognized. */
-#define RE_NO_GNU_OPS (RE_NO_POSIX_BACKTRACKING << 1)
+#define REG_NO_GNU_OPS (1ul << 19)
/* If this bit is set, turn on internal regex debugging.
If not set, and debugging was on, turn it off.
@@ -158,29 +203,29 @@
We define this bit always, so that all that's needed to turn on
debugging is to recompile regex.c; the calling code can always have
this bit set, and it won't affect anything in the normal case. */
-#define RE_DEBUG (RE_NO_GNU_OPS << 1)
+#define REG_DEBUG (1ul << 20)
/* If this bit is set, a syntactically invalid interval is treated as
a string of ordinary characters. For example, the ERE 'a{1' is
treated as 'a\{1'. */
-#define RE_INVALID_INTERVAL_ORD (RE_DEBUG << 1)
+#define REG_INVALID_INTERVAL_ORD (1ul << 21)
/* If this bit is set, then ignore case when matching.
If not set, then case is significant. */
-#define RE_ICASE (RE_INVALID_INTERVAL_ORD << 1)
+#define REG_IGNORE_CASE (1ul << 22)
-/* This bit is used internally like RE_CONTEXT_INDEP_ANCHORS but only
+/* This bit is used internally like REG_CONTEXT_INDEP_ANCHORS but only
for ^, because it is difficult to scan the regex backwards to find
whether ^ should be special. */
-#define RE_CARET_ANCHORS_HERE (RE_ICASE << 1)
+#define REG_CARET_ANCHORS_HERE (1ul << 23)
/* If this bit is set, then \{ cannot be first in an bre or
immediately after an alternation or begin-group operator. */
-#define RE_CONTEXT_INVALID_DUP (RE_CARET_ANCHORS_HERE << 1)
+#define REG_CONTEXT_INVALID_DUP (1ul << 24)
/* If this bit is set, then no_sub will be set to 1 during
re_compile_pattern. */
-#define RE_NO_SUB (RE_CONTEXT_INVALID_DUP << 1)
+#define REG_NO_SUB (1ul << 25)
/* This global variable defines the particular regexp syntax to use (for
some interfaces). When a regexp is compiled, the syntax used is
@@ -192,81 +237,78 @@
(The [[[ comments delimit what gets put into the Texinfo file, so
don't delete them!) */
/* [[[begin syntaxes]]] */
-#define RE_SYNTAX_EMACS 0
+#define REG_SYNTAX_EMACS 0
-#define RE_SYNTAX_AWK \
- (RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DOT_NOT_NULL \
- | RE_NO_BK_PARENS | RE_NO_BK_REFS \
- | RE_NO_BK_VBAR | RE_NO_EMPTY_RANGES \
- | RE_DOT_NEWLINE | RE_CONTEXT_INDEP_ANCHORS \
- | RE_UNMATCHED_RIGHT_PAREN_ORD | RE_NO_GNU_OPS)
-
-#define RE_SYNTAX_GNU_AWK \
- ((RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DEBUG)
\
- & ~(RE_DOT_NOT_NULL | RE_INTERVALS | RE_CONTEXT_INDEP_OPS \
- | RE_CONTEXT_INVALID_OPS ))
-
-#define RE_SYNTAX_POSIX_AWK \
- (RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS \
- | RE_INTERVALS | RE_NO_GNU_OPS)
-
-#define RE_SYNTAX_GREP \
- (RE_BK_PLUS_QM | RE_CHAR_CLASSES
\
- | RE_HAT_LISTS_NOT_NEWLINE | RE_INTERVALS \
- | RE_NEWLINE_ALT)
-
-#define RE_SYNTAX_EGREP
\
- (RE_CHAR_CLASSES | RE_CONTEXT_INDEP_ANCHORS \
- | RE_CONTEXT_INDEP_OPS | RE_HAT_LISTS_NOT_NEWLINE \
- | RE_NEWLINE_ALT | RE_NO_BK_PARENS \
- | RE_NO_BK_VBAR)
-
-#define RE_SYNTAX_POSIX_EGREP \
- (RE_SYNTAX_EGREP | RE_INTERVALS | RE_NO_BK_BRACES \
- | RE_INVALID_INTERVAL_ORD)
+#define REG_SYNTAX_AWK \
+ (REG_BACKSLASH_ESCAPE_IN_LISTS | REG_DOT_NOT_NULL \
+ | REG_NO_BK_PARENS | REG_NO_BK_REFS \
+ | REG_NO_BK_VBAR | REG_NO_EMPTY_RANGES \
+ | REG_DOT_NEWLINE | REG_CONTEXT_INDEP_ANCHORS \
+ | REG_UNMATCHED_RIGHT_PAREN_ORD | REG_NO_GNU_OPS)
+
+#define REG_SYNTAX_GNU_AWK \
+ ((REG_SYNTAX_POSIX_EXTENDED | REG_BACKSLASH_ESCAPE_IN_LISTS \
+ | REG_DEBUG) \
+ & ~(REG_DOT_NOT_NULL | REG_INTERVALS | REG_CONTEXT_INDEP_OPS
\
+ | REG_CONTEXT_INVALID_OPS ))
+
+#define REG_SYNTAX_POSIX_AWK \
+ (REG_SYNTAX_POSIX_EXTENDED | REG_BACKSLASH_ESCAPE_IN_LISTS \
+ | REG_INTERVALS | REG_NO_GNU_OPS)
+
+#define REG_SYNTAX_GREP
\
+ (REG_BK_PLUS_QM | REG_CHAR_CLASSES \
+ | REG_HAT_LISTS_NOT_NEWLINE | REG_INTERVALS \
+ | REG_NEWLINE_ALT)
+
+#define REG_SYNTAX_EGREP \
+ (REG_CHAR_CLASSES | REG_CONTEXT_INDEP_ANCHORS \
+ | REG_CONTEXT_INDEP_OPS | REG_HAT_LISTS_NOT_NEWLINE \
+ | REG_NEWLINE_ALT | REG_NO_BK_PARENS \
+ | REG_NO_BK_VBAR)
+
+#define REG_SYNTAX_POSIX_EGREP \
+ (REG_SYNTAX_EGREP | REG_INTERVALS | REG_NO_BK_BRACES \
+ | REG_INVALID_INTERVAL_ORD)
/* P1003.2/D11.2, section 4.20.7.1, lines 5078ff. */
-#define RE_SYNTAX_ED RE_SYNTAX_POSIX_BASIC
+#define REG_SYNTAX_ED REG_SYNTAX_POSIX_BASIC
-#define RE_SYNTAX_SED RE_SYNTAX_POSIX_BASIC
+#define REG_SYNTAX_SED REG_SYNTAX_POSIX_BASIC
/* Syntax bits common to both basic and extended POSIX regex syntax. */
-#define _RE_SYNTAX_POSIX_COMMON
\
- (RE_CHAR_CLASSES | RE_DOT_NEWLINE | RE_DOT_NOT_NULL \
- | RE_INTERVALS | RE_NO_EMPTY_RANGES)
+#define _REG_SYNTAX_POSIX_COMMON \
+ (REG_CHAR_CLASSES | REG_DOT_NEWLINE | REG_DOT_NOT_NULL \
+ | REG_INTERVALS | REG_NO_EMPTY_RANGES)
-#define RE_SYNTAX_POSIX_BASIC \
- (_RE_SYNTAX_POSIX_COMMON | RE_BK_PLUS_QM | RE_CONTEXT_INVALID_DUP)
+#define REG_SYNTAX_POSIX_BASIC \
+ (_REG_SYNTAX_POSIX_COMMON | REG_BK_PLUS_QM | REG_CONTEXT_INVALID_DUP)
-/* Differs from ..._POSIX_BASIC only in that RE_BK_PLUS_QM becomes
- RE_LIMITED_OPS, i.e., \? \+ \| are not recognized. Actually, this
+/* Differs from ..._POSIX_BASIC only in that REG_BK_PLUS_QM becomes
+ REG_LIMITED_OPS, i.e., \? \+ \| are not recognized. Actually, this
isn't minimal, since other operators, such as \`, aren't disabled. */
-#define RE_SYNTAX_POSIX_MINIMAL_BASIC \
- (_RE_SYNTAX_POSIX_COMMON | RE_LIMITED_OPS)
+#define REG_SYNTAX_POSIX_MINIMAL_BASIC \
+ (_REG_SYNTAX_POSIX_COMMON | REG_LIMITED_OPS)
-#define RE_SYNTAX_POSIX_EXTENDED \
- (_RE_SYNTAX_POSIX_COMMON | RE_CONTEXT_INDEP_ANCHORS \
- | RE_CONTEXT_INDEP_OPS | RE_NO_BK_BRACES \
- | RE_NO_BK_PARENS | RE_NO_BK_VBAR \
- | RE_CONTEXT_INVALID_OPS | RE_UNMATCHED_RIGHT_PAREN_ORD)
-
-/* Differs from ..._POSIX_EXTENDED in that RE_CONTEXT_INDEP_OPS is
- removed and RE_NO_BK_REFS is added. */
-#define RE_SYNTAX_POSIX_MINIMAL_EXTENDED \
- (_RE_SYNTAX_POSIX_COMMON | RE_CONTEXT_INDEP_ANCHORS \
- | RE_CONTEXT_INVALID_OPS | RE_NO_BK_BRACES \
- | RE_NO_BK_PARENS | RE_NO_BK_REFS \
- | RE_NO_BK_VBAR | RE_UNMATCHED_RIGHT_PAREN_ORD)
+#define REG_SYNTAX_POSIX_EXTENDED \
+ (_REG_SYNTAX_POSIX_COMMON | REG_CONTEXT_INDEP_ANCHORS \
+ | REG_CONTEXT_INDEP_OPS | REG_NO_BK_BRACES
\
+ | REG_NO_BK_PARENS | REG_NO_BK_VBAR \
+ | REG_CONTEXT_INVALID_OPS | REG_UNMATCHED_RIGHT_PAREN_ORD)
+
+/* Differs from ..._POSIX_EXTENDED in that REG_CONTEXT_INDEP_OPS is
+ removed and REG_NO_BK_REFS is added. */
+#define REG_SYNTAX_POSIX_MINIMAL_EXTENDED \
+ (_REG_SYNTAX_POSIX_COMMON | REG_CONTEXT_INDEP_ANCHORS \
+ | REG_CONTEXT_INVALID_OPS | REG_NO_BK_BRACES
\
+ | REG_NO_BK_PARENS | REG_NO_BK_REFS \
+ | REG_NO_BK_VBAR | REG_UNMATCHED_RIGHT_PAREN_ORD)
/* [[[end syntaxes]]] */
-/* Maximum number of duplicates an interval can allow. Some systems
- (erroneously) define this in other header files, but we want our
- value, so remove any previous define. */
-#ifdef RE_DUP_MAX
-# undef RE_DUP_MAX
-#endif
-/* If sizeof(int) == 2, then ((1 << 15) - 1) overflows. */
-#define RE_DUP_MAX (0x7fff)
+/* Maximum number of duplicates an interval can allow. This is
+ distinct from RE_DUP_MAX, to conform to POSIX name space rules and
+ to avoid collisions with <limits.h>. */
+#define REG_DUP_MAX 32767
/* POSIX `cflags' bits (i.e., information for `regcomp'). */
@@ -277,16 +319,16 @@
/* If this bit is set, then ignore case when matching.
If not set, then case is significant. */
-#define REG_ICASE (REG_EXTENDED << 1)
+#define REG_ICASE (1 << 1)
/* If this bit is set, then anchors do not match at newline
characters in the string.
If not set, then anchors do match at newlines. */
-#define REG_NEWLINE (REG_ICASE << 1)
+#define REG_NEWLINE (1 << 2)
/* If this bit is set, then report only success or fail in regexec.
If not set, then returns differ between not matching and errors. */
-#define REG_NOSUB (REG_NEWLINE << 1)
+#define REG_NOSUB (1 << 3)
/* POSIX `eflags' bits (i.e., information for regexec). */
@@ -307,74 +349,131 @@
/* If any error codes are removed, changed, or added, update the
- `re_error_msg' table in regex.c. */
+ `__re_error_msgid' table in regcomp.c. */
+
typedef enum
{
-#ifdef _XOPEN_SOURCE
- REG_ENOSYS = -1, /* This will never happen for this implementation. */
-#endif
+ _REG_ENOSYS = -1, /* This will never happen for this implementation. */
+#define REG_ENOSYS _REG_ENOSYS
- REG_NOERROR = 0, /* Success. */
- REG_NOMATCH, /* Didn't find a match (for regexec). */
+ _REG_NOERROR, /* Success. */
+#define REG_NOERROR _REG_NOERROR
+
+ _REG_NOMATCH, /* Didn't find a match (for regexec). */
+#define REG_NOMATCH _REG_NOMATCH
/* POSIX regcomp return error codes. (In the order listed in the
standard.) */
- REG_BADPAT, /* Invalid pattern. */
- REG_ECOLLATE, /* Inalid collating element. */
- REG_ECTYPE, /* Invalid character class name. */
- REG_EESCAPE, /* Trailing backslash. */
- REG_ESUBREG, /* Invalid back reference. */
- REG_EBRACK, /* Unmatched left bracket. */
- REG_EPAREN, /* Parenthesis imbalance. */
- REG_EBRACE, /* Unmatched \{. */
- REG_BADBR, /* Invalid contents of \{\}. */
- REG_ERANGE, /* Invalid range end. */
- REG_ESPACE, /* Ran out of memory. */
- REG_BADRPT, /* No preceding re for repetition op. */
+
+ _REG_BADPAT, /* Invalid pattern. */
+#define REG_BADPAT _REG_BADPAT
+
+ _REG_ECOLLATE, /* Inalid collating element. */
+#define REG_ECOLLATE _REG_ECOLLATE
+
+ _REG_ECTYPE, /* Invalid character class name. */
+#define REG_ECTYPE _REG_ECTYPE
+
+ _REG_EESCAPE, /* Trailing backslash. */
+#define REG_EESCAPE _REG_EESCAPE
+
+ _REG_ESUBREG, /* Invalid back reference. */
+#define REG_ESUBREG _REG_ESUBREG
+
+ _REG_EBRACK, /* Unmatched left bracket. */
+#define REG_EBRACK _REG_EBRACK
+
+ _REG_EPAREN, /* Parenthesis imbalance. */
+#define REG_EPAREN _REG_EPAREN
+
+ _REG_EBRACE, /* Unmatched \{. */
+#define REG_EBRACE _REG_EBRACE
+
+ _REG_BADBR, /* Invalid contents of \{\}. */
+#define REG_BADBR _REG_BADBR
+
+ _REG_ERANGE, /* Invalid range end. */
+#define REG_ERANGE _REG_ERANGE
+
+ _REG_ESPACE, /* Ran out of memory. */
+#define REG_ESPACE _REG_ESPACE
+
+ _REG_BADRPT, /* No preceding re for repetition op. */
+#define REG_BADRPT _REG_BADRPT
/* Error codes we've added. */
- REG_EEND, /* Premature end. */
- REG_ESIZE, /* Compiled pattern bigger than 2^16 bytes. */
- REG_ERPAREN /* Unmatched ) or \); not returned from regcomp. */
+
+ _REG_EEND, /* Premature end. */
+#define REG_EEND _REG_EEND
+
+ _REG_ESIZE, /* Compiled pattern bigger than 2^16 bytes. */
+#define REG_ESIZE _REG_ESIZE
+
+ _REG_ERPAREN /* Unmatched ) or \); not returned from regcomp. */
+#define REG_ERPAREN _REG_ERPAREN
+
} reg_errcode_t;
+/* In the traditional GNU implementation, regex.h defined member names
+ like `buffer' that POSIX does not allow. These members now have
+ names with leading `re_' (e.g., `re_buffer'). Support the old
+ names only if _REGEX_SOURCE is defined. New programs should use
+ the new names. */
+#ifdef _REGEX_SOURCE
+# define _REG_RE_NAME(id) id
+# define _REG_RM_NAME(id) id
+#else
+# define _REG_RE_NAME(id) re_##id
+# define _REG_RM_NAME(id) rm_##id
+#endif
+
+/* The user can specify the type of the re_translate member by
+ defining the macro REG_TRANSLATE_TYPE. In the traditional GNU
+ implementation, this macro was named RE_TRANSLATE_TYPE, but POSIX
+ does not allow this. Support the old name only if _REGEX_SOURCE
+ and if the new name is not defined. New programs should use the new
+ name. */
+#ifndef REG_TRANSLATE_TYPE
+# if defined _REGEX_SOURCE && defined RE_TRANSLATE_TYPE
+# define REG_TRANSLATE_TYPE RE_TRANSLATE_TYPE
+# else
+# define REG_TRANSLATE_TYPE char *
+# endif
+#endif
+
/* This data structure represents a compiled pattern. Before calling
- the pattern compiler, the fields `buffer', `allocated', `fastmap',
- `translate', and `no_sub' can be set. After the pattern has been
+ the pattern compiler), the fields `re_buffer', `re_allocated', `re_fastmap',
+ `re_translate', and `re_no_sub' can be set. After the pattern has been
compiled, the `re_nsub' field is available. All other fields are
private to the regex routines. */
-#ifndef RE_TRANSLATE_TYPE
-# define RE_TRANSLATE_TYPE char *
-#endif
-
struct re_pattern_buffer
{
/* [[[begin pattern_buffer]]] */
/* Space that holds the compiled pattern. It is declared as
`unsigned char *' because its elements are
sometimes used as array indexes. */
- unsigned char *buffer;
+ unsigned char *_REG_RE_NAME (buffer);
- /* Number of bytes to which `buffer' points. */
- unsigned long int allocated;
+ /* Number of bytes to which `re_buffer' points. */
+ __re_long_size_t _REG_RE_NAME (allocated);
- /* Number of bytes actually used in `buffer'. */
- unsigned long int used;
+ /* Number of bytes actually used in `re_buffer'. */
+ __re_long_size_t _REG_RE_NAME (used);
/* Syntax setting with which the pattern was compiled. */
- reg_syntax_t syntax;
+ reg_syntax_t _REG_RE_NAME (syntax);
/* Pointer to a fastmap, if any, otherwise zero. re_search uses
the fastmap, if there is one, to skip over impossible
starting points for matches. */
- char *fastmap;
+ char *_REG_RE_NAME (fastmap);
/* Either a translate table to apply to all characters before
comparing them, or zero for no translation. The translation
is applied to a pattern when it is compiled and to a string
when it is matched. */
- RE_TRANSLATE_TYPE translate;
+ REG_TRANSLATE_TYPE _REG_RE_NAME (translate);
/* Number of subexpressions found by the compiler. */
size_t re_nsub;
@@ -384,59 +483,55 @@
whether or not we should use the fastmap, so we don't set
this absolutely perfectly; see `re_compile_fastmap' (the
`duplicate' case). */
- unsigned can_be_null : 1;
+ unsigned int _REG_RE_NAME (can_be_null) : 1;
- /* If REGS_UNALLOCATED, allocate space in the `regs' structure
- for `max (RE_NREGS, re_nsub + 1)' groups.
- If REGS_REALLOCATE, reallocate space if necessary.
- If REGS_FIXED, use what's there. */
-#define REGS_UNALLOCATED 0
-#define REGS_REALLOCATE 1
-#define REGS_FIXED 2
- unsigned regs_allocated : 2;
+ /* If REG_UNALLOCATED, allocate space in the `regs' structure
+ for `max (REG_NREGS, re_nsub + 1)' groups.
+ If REG_REALLOCATE, reallocate space if necessary.
+ If REG_FIXED, use what's there. */
+#define REG_UNALLOCATED 0
+#define REG_REALLOCATE 1
+#define REG_FIXED 2
+ unsigned int _REG_RE_NAME (regs_allocated) : 2;
/* Set to zero when `regex_compile' compiles a pattern; set to one
by `re_compile_fastmap' if it updates the fastmap. */
- unsigned fastmap_accurate : 1;
+ unsigned int _REG_RE_NAME (fastmap_accurate) : 1;
/* If set, `re_match_2' does not return information about
subexpressions. */
- unsigned no_sub : 1;
+ unsigned int _REG_RE_NAME (no_sub) : 1;
/* If set, a beginning-of-line anchor doesn't match at the
beginning of the string. */
- unsigned not_bol : 1;
+ unsigned int _REG_RE_NAME (not_bol) : 1;
/* Similarly for an end-of-line anchor. */
- unsigned not_eol : 1;
+ unsigned int _REG_RE_NAME (not_eol) : 1;
/* If true, an anchor at a newline matches. */
- unsigned newline_anchor : 1;
+ unsigned int _REG_RE_NAME (newline_anchor) : 1;
/* [[[end pattern_buffer]]] */
};
typedef struct re_pattern_buffer regex_t;
-/* Type for byte offsets within the string. POSIX mandates this. */
-typedef int regoff_t;
-
-
/* This is the structure we store register match data in. See
regex.texinfo for a full description of what registers match. */
struct re_registers
{
- unsigned num_regs;
- regoff_t *start;
- regoff_t *end;
+ __re_size_t _REG_RM_NAME (num_regs);
+ regoff_t *_REG_RM_NAME (start);
+ regoff_t *_REG_RM_NAME (end);
};
-/* If `regs_allocated' is REGS_UNALLOCATED in the pattern buffer,
+/* If `regs_allocated' is REG_UNALLOCATED in the pattern buffer,
`re_match_2' returns information about at least this many registers
the first time a `regs' structure is passed. */
-#ifndef RE_NREGS
-# define RE_NREGS 30
+#ifndef REG_NREGS
+# define REG_NREGS 30
#endif
@@ -451,70 +546,57 @@
/* Declarations for routines. */
-/* To avoid duplicating every routine declaration -- once with a
- prototype (if we are ANSI), and once without (if we aren't) -- we
- use the following macro to declare argument types. This
- unfortunately clutters up the declarations a bit, but I think it's
- worth it. */
-
-#if __STDC__
-
-# define _RE_ARGS(args) args
-
-#else /* not __STDC__ */
-
-# define _RE_ARGS(args) ()
-
-#endif /* not __STDC__ */
-
/* Sets the current default syntax to SYNTAX, and return the old syntax.
You can also simply assign to the `re_syntax_options' variable. */
-extern reg_syntax_t re_set_syntax _RE_ARGS ((reg_syntax_t syntax));
+extern reg_syntax_t re_set_syntax (reg_syntax_t __syntax);
/* Compile the regular expression PATTERN, with length LENGTH
and syntax given by the global `re_syntax_options', into the buffer
BUFFER. Return NULL if successful, and an error string if not. */
-extern const char *re_compile_pattern
- _RE_ARGS ((const char *pattern, size_t length,
- struct re_pattern_buffer *buffer));
+extern const char *re_compile_pattern (const char *__pattern, size_t __length,
+ struct re_pattern_buffer *__buffer);
/* Compile a fastmap for the compiled pattern in BUFFER; used to
accelerate searches. Return 0 if successful and -2 if was an
internal error. */
-extern int re_compile_fastmap _RE_ARGS ((struct re_pattern_buffer *buffer));
+extern int re_compile_fastmap (struct re_pattern_buffer *__buffer);
/* Search in the string STRING (with length LENGTH) for the pattern
compiled into BUFFER. Start searching at position START, for RANGE
characters. Return the starting position of the match, -1 for no
match, or -2 for an internal error. Also return register
- information in REGS (if REGS and BUFFER->no_sub are nonzero). */
-extern int re_search
- _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string,
- int length, int start, int range, struct re_registers *regs));
+ information in REGS (if REGS and BUFFER->re_no_sub are nonzero). */
+extern regoff_t re_search (struct re_pattern_buffer *__buffer,
+ const char *__string, __re_idx_t __length,
+ __re_idx_t __start, regoff_t __range,
+ struct re_registers *__regs);
/* Like `re_search', but search in the concatenation of STRING1 and
STRING2. Also, stop searching at index START + STOP. */
-extern int re_search_2
- _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string1,
- int length1, const char *string2, int length2,
- int start, int range, struct re_registers *regs, int stop));
+extern regoff_t re_search_2 (struct re_pattern_buffer *__buffer,
+ const char *__string1, __re_idx_t __length1,
+ const char *__string2, __re_idx_t __length2,
+ __re_idx_t __start, regoff_t __range,
+ struct re_registers *__regs,
+ __re_idx_t __stop);
/* Like `re_search', but return how many characters in STRING the regexp
in BUFFER matched, starting at position START. */
-extern int re_match
- _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string,
- int length, int start, struct re_registers *regs));
+extern regoff_t re_match (struct re_pattern_buffer *__buffer,
+ const char *__string, __re_idx_t __length,
+ __re_idx_t __start, struct re_registers *__regs);
/* Relates to `re_match' as `re_search_2' relates to `re_search'. */
-extern int re_match_2
- _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string1,
- int length1, const char *string2, int length2,
- int start, struct re_registers *regs, int stop));
+extern regoff_t re_match_2 (struct re_pattern_buffer *__buffer,
+ const char *__string1, __re_idx_t __length1,
+ const char *__string2, __re_idx_t __length2,
+ __re_idx_t __start, struct re_registers *__regs,
+ __re_idx_t __stop);
/* Set REGS to hold NUM_REGS registers, storing them in STARTS and
@@ -529,15 +611,16 @@
Unless this function is called, the first search or match using
PATTERN_BUFFER will allocate its own register data, without
freeing the old data. */
-extern void re_set_registers
- _RE_ARGS ((struct re_pattern_buffer *buffer, struct re_registers *regs,
- unsigned num_regs, regoff_t *starts, regoff_t *ends));
+extern void re_set_registers (struct re_pattern_buffer *__buffer,
+ struct re_registers *__regs,
+ __re_size_t __num_regs,
+ regoff_t *__starts, regoff_t *__ends);
#if defined _REGEX_RE_COMP || defined _LIBC
# ifndef _CRAY
/* 4.2 bsd compatibility. */
-extern char *re_comp _RE_ARGS ((const char *));
-extern int re_exec _RE_ARGS ((const char *));
+extern char *re_comp (const char *);
+extern int re_exec (const char *);
# endif
#endif
@@ -552,9 +635,9 @@
# endif
# endif
#endif
-/* gcc 3.1 and up support the [restrict] syntax. */
+/* gcc 3.1 and up support the [restrict] syntax, but g++ doesn't. */
#ifndef __restrict_arr
-# if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 1)
+# if (__GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 1)) && !defined
__cplusplus
# define __restrict_arr __restrict
# else
# define __restrict_arr
@@ -562,20 +645,114 @@
#endif
/* POSIX compatibility. */
-extern int regcomp _RE_ARGS ((regex_t *__restrict __preg,
- const char *__restrict __pattern,
- int __cflags));
-
-extern int regexec _RE_ARGS ((const regex_t *__restrict __preg,
- const char *__restrict __string, size_t __nmatch,
- regmatch_t __pmatch[__restrict_arr],
- int __eflags));
+extern int regcomp (regex_t *__restrict __preg,
+ const char *__restrict __pattern,
+ int __cflags);
+
+extern int regexec (const regex_t *__restrict __preg,
+ const char *__restrict __string, size_t __nmatch,
+ regmatch_t __pmatch[__restrict_arr],
+ int __eflags);
+
+extern size_t regerror (int __errcode, const regex_t *__restrict __preg,
+ char *__restrict __errbuf, size_t __errbuf_size);
+
+extern void regfree (regex_t *__preg);
+
+
+#ifdef _REGEX_SOURCE
+
+/* Define the POSIX-compatible member names in terms of the
+ incompatible (and deprecated) names established by _REG_RE_NAME.
+ New programs should use the re_* names. */
+
+# define re_allocated allocated
+# define re_buffer buffer
+# define re_can_be_null can_be_null
+# define re_fastmap fastmap
+# define re_fastmap_accurate fastmap_accurate
+# define re_newline_anchor newline_anchor
+# define re_no_sub no_sub
+# define re_not_bol not_bol
+# define re_not_eol not_eol
+# define re_regs_allocated regs_allocated
+# define re_syntax syntax
+# define re_translate translate
+# define re_used used
+
+/* Similarly for _REG_RM_NAME. */
+
+# define rm_end end
+# define rm_num_regs num_regs
+# define rm_start start
+
+/* Undef RE_DUP_MAX first, in case the user has already included a
+ <limits.h> with an incompatible definition.
+
+ On GNU systems, the most common spelling for RE_DUP_MAX's value in
+ <limits.h> is (0x7ffff), so define RE_DUP_MAX to that, not to
+ REG_DUP_MAX. This avoid some duplicate-macro-definition warnings
+ with programs that include <limits.h> after this file.
+
+ New programs should not assume that regex.h defines RE_DUP_MAX; to
+ get the value of RE_DUP_MAX, they should instead include <limits.h>
+ and possibly invoke the sysconf function. */
-extern size_t regerror _RE_ARGS ((int __errcode, const regex_t *__preg,
- char *__errbuf, size_t __errbuf_size));
+# undef RE_DUP_MAX
+# define RE_DUP_MAX (0x7fff)
-extern void regfree _RE_ARGS ((regex_t *__preg));
+/* Define the following symbols for backward source compatibility.
+ These symbols violate the POSIX name space rules, and new programs
+ should avoid them. */
+
+# define REGS_FIXED REG_FIXED
+# define REGS_REALLOCATE REG_REALLOCATE
+# define REGS_UNALLOCATED REG_UNALLOCATED
+# define RE_BACKSLASH_ESCAPE_IN_LISTS REG_BACKSLASH_ESCAPE_IN_LISTS
+# define RE_BK_PLUS_QM REG_BK_PLUS_QM
+# define RE_CARET_ANCHORS_HERE REG_CARET_ANCHORS_HERE
+# define RE_CHAR_CLASSES REG_CHAR_CLASSES
+# define RE_CONTEXT_INDEP_ANCHORS REG_CONTEXT_INDEP_ANCHORS
+# define RE_CONTEXT_INDEP_OPS REG_CONTEXT_INDEP_OPS
+# define RE_CONTEXT_INVALID_DUP REG_CONTEXT_INVALID_DUP
+# define RE_CONTEXT_INVALID_OPS REG_CONTEXT_INVALID_OPS
+# define RE_DEBUG REG_DEBUG
+# define RE_DOT_NEWLINE REG_DOT_NEWLINE
+# define RE_DOT_NOT_NULL REG_DOT_NOT_NULL
+# define RE_HAT_LISTS_NOT_NEWLINE REG_HAT_LISTS_NOT_NEWLINE
+# define RE_ICASE REG_IGNORE_CASE /* avoid collision with REG_ICASE */
+# define RE_INTERVALS REG_INTERVALS
+# define RE_INVALID_INTERVAL_ORD REG_INVALID_INTERVAL_ORD
+# define RE_LIMITED_OPS REG_LIMITED_OPS
+# define RE_NEWLINE_ALT REG_NEWLINE_ALT
+# define RE_NO_BK_BRACES REG_NO_BK_BRACES
+# define RE_NO_BK_PARENS REG_NO_BK_PARENS
+# define RE_NO_BK_REFS REG_NO_BK_REFS
+# define RE_NO_BK_VBAR REG_NO_BK_VBAR
+# define RE_NO_EMPTY_RANGES REG_NO_EMPTY_RANGES
+# define RE_NO_GNU_OPS REG_NO_GNU_OPS
+# define RE_NO_POSIX_BACKTRACKING REG_NO_POSIX_BACKTRACKING
+# define RE_NO_SUB REG_NO_SUB
+# define RE_NREGS REG_NREGS
+# define RE_SYNTAX_AWK REG_SYNTAX_AWK
+# define RE_SYNTAX_ED REG_SYNTAX_ED
+# define RE_SYNTAX_EGREP REG_SYNTAX_EGREP
+# define RE_SYNTAX_EMACS REG_SYNTAX_EMACS
+# define RE_SYNTAX_GNU_AWK REG_SYNTAX_GNU_AWK
+# define RE_SYNTAX_GREP REG_SYNTAX_GREP
+# define RE_SYNTAX_POSIX_AWK REG_SYNTAX_POSIX_AWK
+# define RE_SYNTAX_POSIX_BASIC REG_SYNTAX_POSIX_BASIC
+# define RE_SYNTAX_POSIX_EGREP REG_SYNTAX_POSIX_EGREP
+# define RE_SYNTAX_POSIX_EXTENDED REG_SYNTAX_POSIX_EXTENDED
+# define RE_SYNTAX_POSIX_MINIMAL_BASIC REG_SYNTAX_POSIX_MINIMAL_BASIC
+# define RE_SYNTAX_POSIX_MINIMAL_EXTENDED REG_SYNTAX_POSIX_MINIMAL_EXTENDED
+# define RE_SYNTAX_SED REG_SYNTAX_SED
+# define RE_UNMATCHED_RIGHT_PAREN_ORD REG_UNMATCHED_RIGHT_PAREN_ORD
+# ifndef RE_TRANSLATE_TYPE
+# define RE_TRANSLATE_TYPE REG_TRANSLATE_TYPE
+# endif
+#endif /* defined _REGEX_SOURCE */
#ifdef __cplusplus
}
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Cvs-cvs] Changes to ccvs/lib/regex.h,
Derek Robert Price <=