debian-sf-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Debian-sf-devel] Re: [Debian-sf-users] how to configure ldap passw


From: Soon-Son Kwon
Subject: Re: [Debian-sf-devel] Re: [Debian-sf-users] how to configure ldap password?
Date: Mon, 25 Mar 2002 23:38:28 +0900
User-agent: Mutt/1.2.5i

Good to hear that you got the same problem and solved it...

Just to make sure...did you change any value in /etc/sourceforge/local.inc
or any other file while installing sf to your woody with the following
steps?


On Mon, Mar 25, 2002 at 06:20:05PM +0800, Thomas R. Hal wrote:
> First, thanks for an AMAZINGLY easy installation of SF.  I had been
> working with SF-Genericinst, and it had too many problems for me, as
> well as some bugs.  I am telling others to use debian-sf instead. :)
> 
> I tried to do a 2.6.0+8 install on a clean Woody machine, and ran into
> the same LDAP problems.  Here is what steps I followed:
> 
> 1. Install Woody (base only - didn't run dselect, etc. after base)
> 2. Added Christian's 2.6 packages line to my sources.list
> 3. Did an apt-get update; apt-get install sourceforge
> 4. Many packages downloaded and the SF install failed at the same point
> as Soon-Son Kwon (at adding entries to LDAP)
> 5. Followed Soon-Son Kwon's instructions by commenting out
> install-ldap.sh and re-ran the installation - completed successfully
> 6. Did the install-ldap.sh purge; install-ldap.sh reset ;
> install-ldap.sh configure
> 
> Now, everything is up and running.  I am doing testing right now.  It
> seems like everything is working so far, with the exception of DNS (yes,
> I waited for the hourly update, but it hasn't updated yet).
> 
> So, there are two things I wanted to mention.  First, if you perform an
> install on a _clean_ machine, the LDAP step fails for whatever reason.
> If I follow the instructions from Soon-Son Kwon, things work fine.
> Second, any ideas why DNS is having problems?  Did I configure it
> incorrectly?
> 
> Thanks again.  I'll keep doing clean installs (reinstalling Woody and
> then sourceforge, so you can have better testing against a "clean"
> install to knock out problems with 2.6.0+.
> 
> Thomas (in Beijing)
> 
> -- 
> Thomas R. Hall <address@hidden> http://www.smartdot.com/
> [86.10] 6231.3318 x1109
> 
> 
> -----Original Message-----
> From: address@hidden
> [mailto:address@hidden On Behalf Of
> Christian BAYLE
> Sent: Monday, March 25, 2002 17:04
> To: address@hidden
> Cc: address@hidden
> Subject: Re: [Debian-sf-devel] Re: [Debian-sf-users] how to configure
> ldap password?
> 
> 
> Soon-Son Kwon wrote:
> 
> > 
> > Today I could install sf to one another woody box with same step 
> > (skipping install-ldap.sh) and I could upgrade to 2.6.08 WITHOUT any 
> > error. It seems that once you configured 2.5.X correctly, upgrading to
> 
> > 2.6.08 will work fine.
> > 
> Don't forget that 2.6 is experimental and that smooth upgrade is not 
> complete. There are still some diff in table between 2.5+upgrade and 2.6
> We don't recommend the use of 2.6 for anything else than experiments
> 
> > I didn't try to install 2.6.X directly so far but
> > if you can, please double check the same file on 2.6.X to prevent the 
> > same error....*grin* ldap was a real tough one for me.... :-)
> > --
> I did it
> 
> -- 
> Christian Bayle 
> ========================================================================
> =======
> E-mail: address@hidden
> 
> _______________________________________________
> Debian-sf-users mailing list address@hidden
> http://mail.freesoftware.fsf.org/mailman/listinfo/debian-sf-users
> 
> 
> 
> _______________________________________________
> Debian-sf-users mailing list
> address@hidden
> http://mail.freesoftware.fsf.org/mailman/listinfo/debian-sf-users

-- 
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
           (o_             **WTFM**
(o_  (o_   //\
(/)_ (/)_  V_/_        http://kldp.org
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*     



reply via email to

[Prev in Thread] Current Thread [Next in Thread]