Re: [Denemo-devel] More timidity diagnostics

[Richard Shann]

On Thu, 2008-11-06 at 18:49 +0100, Benoit Rouits wrote:
> that is normal,
> te right command is:
> aconnect 20 129
right - no error message, but no output from the loudspeakers (alsa
mixer shows vol control up, unmuted).
If I connect aseqdump as well (by the same methodology) it gets output.
Thanks for the help
Richard
> 
> (think of the midiflow from input to output)
> -  ben
> Richard Shann a écrit :
> > I have tracked down some diagnostics:
> > After running 
> > timidity -iAD
> > to start the timidity daemon I get
> > 
> > $ aconnect -o
> > client 14: 'Midi Through' [type=kernel]
> >     0 'Midi Through Port-0'
> > client 20: 'USB Keystation 49e' [type=kernel]
> >     0 'USB Keystation 49e MIDI 1'
> > client 128: 'aseqdump' [type=user]
> >     0 'aseqdump        '
> > address@hidden:~$ aconnect -o
> > client 14: 'Midi Through' [type=kernel]
> >     0 'Midi Through Port-0'
> > client 20: 'USB Keystation 49e' [type=kernel]
> >     0 'USB Keystation 49e MIDI 1'
> > client 128: 'aseqdump' [type=user]
> >     0 'aseqdump        '
> > client 129: 'TiMidity' [type=user]
> >     0 'TiMidity port 0 '
> >     1 'TiMidity port 1 '
> >     2 'TiMidity port 2 '
> >     3 'TiMidity port 3 '
> > 
> > But when I try:
> > 
> > $ aconnect 129 20
> > Connection failed (Operation not permitted)
> > 
> > It does not complain if I connect the other way round, but it does not
> > give output to the speakers either. (I have installed soundfonts for
> > timidity).
> > Richard
>