discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Discuss-gnuradio] AR5000 and downconversion


From: Alan Gray
Subject: [Discuss-gnuradio] AR5000 and downconversion
Date: Wed, 14 May 2003 23:52:19 +1000

Hi all,

I've recently found that I have access to several standard radio receivers, including an AOR AR5000 and AR8600. Naturally, these both have a 10.7MHz output IF and thus aren't much use in combination with my 20MSPS A/D card but I was wondering if anyone has looked into the possibility of adding an extra downconversion stage after this to obtain a usable IF.

I haven't much experience in dealing with the radio side of things, but a quick look at some books on the subject seem to indicate that it might not be too hard a circuit to put together. If anyone has looked into doing this or has ideas on if it will/will not work, any information would be most welcome

Alan
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.480 / Virus Database: 276 - Release Date: 12/05/03

reply via email to

[Prev in Thread] Current Thread [Next in Thread]