[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] using a 48k sound card with wfm_rcv_gui

From: 'Eric Blossom'
Subject: Re: [Discuss-gnuradio] using a 48k sound card with wfm_rcv_gui
Date: Mon, 2 May 2005 11:52:48 -0700
User-agent: Mutt/1.5.6i

On Mon, May 02, 2005 at 11:12:07AM -0700, Richard Cagley wrote:
> That worked. Thanks.
> But, I still only get static (I even have an actual antenna hooked up to the
> TV card). Is it because of the warning I'm getting?
> address@hidden usrp]$ wfm_rcv_gui.py 93.7
> RX d'board A: TV Rx
> RX d'board B: <none>
> usrp_standard_rx::set_decim_rate: WARNING rates > 128 result in incorrect
> gain.
> >>> gr_fir_fff: using SSE

Since you are using the TVRX daughter board, you should be using the
tvrx_wfm_rcv_gui.py program.  wfm_rcv_gui is for people with no RF
front end.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]