[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] running
From: |
Martin Dvh |
Subject: |
Re: [Discuss-gnuradio] running |
Date: |
Mon, 15 May 2006 14:12:29 +0200 |
User-agent: |
Debian Thunderbird 1.0.2 (X11/20060423) |
David Caruth wrote:
> Hello!
>
> I've just started playing with GnuRadio and the USRP, and was hoping to run
> it on Windows XP. I found Martin's installer
> "setup-gnuradio-complete-2.6cvs.exe" and it worked great. I then tried to
> run the example to listen to some radio (I had this running with a fedora
> core 5 linux installation with the same usrp). I received the following
> error messages:
>
> C:\caruthd\usrp\gnuradio-examples-0.7\python\usrp>python usrp_wfm_rcv.py -f
> 101.1
>
> found 5 busses
> Using RX d'board A: TV Rx
>
>>>>gr_fir_ccf: using SSE
>>>>gr_fir_fff: using SSE
>
> Traceback (most recent call last):
> File "usrp_wfm_rcv.py", line 268, in ?
> app = stdgui.stdapp (wfm_rx_graph, "USRP WFM RX")
> File "C:\Python24\Lib\site-packages\gnuradio\wxgui\stdgui.py", line 36, in
> __
> init__
> wx.App.__init__ (self, redirect=False)
> File "C:\Python24\Lib\site-packages\wx-2.6-msw-ansi\wx\_core.py", line 7700,
> in __init__
> self._BootstrapApp()
> File "C:\Python24\Lib\site-packages\wx-2.6-msw-ansi\wx\_core.py", line 7352,
> in _BootstrapApp
> return _core_.PyApp__BootstrapApp(*args, **kwargs)
> File "C:\Python24\Lib\site-packages\gnuradio\wxgui\stdgui.py", line 39, in
> On
> init
> frame = stdframe (self.flow_graph_maker, self.title, self._nstatus)
> File "C:\Python24\Lib\site-packages\gnuradio\wxgui\stdgui.py", line 60, in
> __
> init__
> self.panel = stdpanel (self, self, flow_graph_maker)
> File "C:\Python24\Lib\site-packages\gnuradio\wxgui\stdgui.py", line 81, in
> __
> init__
> self.fg = flow_graph_maker (frame, self, vbox, sys.argv)
> File "usrp_wfm_rcv.py", line 93, in __init__
> False) # ok_to_block
> File "C:\Python24\Lib\site-packages\gnuradio\audio_windows.py", line 213, in
> sink
> return _audio_windows.sink(*args)
> NotImplementedError: No matching function for overloaded 'sink'
I have not (yet) implemented the ok_to_block parameter in audio_windows
So remove the last parameter (False) in the instantiation of the audio sink.
So change:
audio_sink = audio.sink (int (audio_rate),
options.audio_output,
False) # ok_to_block
Into:
audio_sink = audio.sink (int (audio_rate),
options.audio_output)
And it should work.
Greetings,
Martin
>
>
> I had seen a previous post where Eric replied that a hex string needed to
> be replaced by a gr function with the hex string as an argument, but from
> looking through the .py files called here, i did not see anything obvious.
> has anyone else had this problem? thanks in advance for any help! oh, and
> by the way, "usrp_fft.py" ran without a problem.
>
> Thanks a lot!
> Dave
>
>
>
>
> ---------------------------------
> Get amazing travel prices for air and hotel in one click on Yahoo! FareChase
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio