Re: [Discuss-gnuradio] Transmit Frequencies

[Thomas Schmid]

> From Ettus Inc.'s FAQ you can read that the BasicTX goes only up to
about 50MHz because the DACs in the USRP run at 128MS/s. You would
need some other hardware to upsample your output to 70MHz.

Thomas

On 12/1/06, Scott Meuleners <address@hidden> wrote:
> I am working on a project for a class, and we have been using the FM
> transmit functions included with the examples, and we've run into a problem
> where we are unable to transmit on frequencies from about 40 to 80 MHz, the
> problem is that we would like to transmit at 72MHz.  The errors amount to
> something like "cannot tune frequency", etc...  Does anyone have any
> suggestions as to how we might get this to work?  We are using the USRP with
> the Basic TX daughterboard.
>
> Thank You,
> Scott Meuleners
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio