[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] usrp rev 3
From: |
Matt Ettus |
Subject: |
Re: [Discuss-gnuradio] usrp rev 3 |
Date: |
Wed, 07 Feb 2007 16:18:16 -0800 |
User-agent: |
Thunderbird 1.5.0.9 (X11/20070104) |
Dan Halperin wrote:
> Does the USRP Rev 3 (1-3-2005) not handle the RFX boards? I guess it's
> been two years...
>
All RFX boards currently shipping are configured for MIMO_B mode, which
requires a Rev 4 or higher USRP (serial number greater than 500).
If you wish to use it with a USRP with a serial number below 500 you
will need to do the following:
Remove R115 (zero ohms) and place it at R116
Remove R36 (zero ohms) and place it at R34
Put the RFX on a USRP (side A) and run the following:
usrp/host/apps/burn-db-eeprom -f -A -t rfxYYYY_mimo_a
where YYYY is the board you have (i.e. 400, 900, 1200, 1800,
or 2400).
Matt