[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] GNU Radio interface to Code Composer Studio

From: Eric Blossom
Subject: Re: [Discuss-gnuradio] GNU Radio interface to Code Composer Studio
Date: Tue, 20 Mar 2007 15:21:15 -0700
User-agent: Mutt/1.5.9i

On Tue, Mar 20, 2007 at 06:09:08PM -0400, ayman shalaby wrote:
> Hi All
> I have realized lately in order to implement my own signal processing
> algorithms on the FPGA i have to break the USRP which could be waste
> of time to me.
> My goal instead of performing the heavy signal processing on the PC's GPP,
> is to implement them on TI 6416 DSK and interface GNURadio to Code
> Composer Studio under Windows (as Code Composer Studio isn't  supported under 
> Linux).
> The USRP will be only used for the DDC and DUC
> I don't know how this interface can be done ,and i don't think anybody
> before done what we are planning to do now . But I just  wonder anyone can 
> give us some guidelines  or opinions.
> Thanks in advance
> Ayman Shalaby

This should be possible, if you're willing to do some work.
For sake of discussion, assume that the "real" daughterboard(s) that
you want to use are installed on the "A-side" of the USRP.

Then, if you installed a Basic Rx and a Basic Tx on the "B-side", you
would have access to 32 i/o pins that connect to the FPGA, 16 on the
Basic Tx and 16 on the Basic Rx.

You have complete control over what happens with those pins, and could
use them to interface (somehow) to the TI 6414.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]