[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] GNURadio installation problem
From: |
Mohammad Hamed Firooz |
Subject: |
Re: [Discuss-gnuradio] GNURadio installation problem |
Date: |
Wed, 26 Sep 2007 21:06:26 -0600 |
User-agent: |
Internet Messaging Program (IMP) H3 (4.1.4) |
Hi,
I encountered an error installing GNURadio on Cygwin. here is a
portion of make command:
make[4]: Leaving directory `/usr/src/gnuradio-3.0.4/usrp/fpga'
make[3]: Leaving directory `/usr/src/gnuradio-3.0.4/usrp/fpga'
Making all in doc
make[3]: Entering directory `/usr/src/gnuradio-3.0.4/usrp/doc'
Making all in other
make[4]: Entering directory `/usr/src/gnuradio-3.0.4/usrp/doc/other'
make[4]: Nothing to be done for `all'.
make[4]: Leaving directory `/usr/src/gnuradio-3.0.4/usrp/doc/other'
make[4]: Entering directory `/usr/src/gnuradio-3.0.4/usrp/doc'
mkdir -p html
xmlto html-nochunks ../../usrp/doc/usrp_guide.xml
xmlto: input does not validate (status 1)
http://www.oasis-open.org/docbook/xml/4.2/:1: parser error : Content
error in th
e external subset
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
^
http://www.oasis-open.org/docbook/xml/4.2/:1: parser error : Content
error in th
e external subset
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
^
make[4]: *** [usrp_guide.html] Error 1
make[4]: Leaving directory `/usr/src/gnuradio-3.0.4/usrp/doc'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/usr/src/gnuradio-3.0.4/usrp/doc'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/usr/src/gnuradio-3.0.4/usrp'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/usr/src/gnuradio-3.0.4'
make: *** [all] Error 2
Does anyone know why make exit with these Errors?
regards
hamed
Quoting Don Ward <address@hidden>:
Hi,
----- Original Message -----
From: "Mohammad Hamed Firooz" <address@hidden>
I got the following errors when I was making the GNURadio Software
on Cygwin. Does anyone have a solution for it?
usrp_basic.cc:481: error: expected unqualified-id before '(' token
usrp_basic.cc: In member function `bool usrp_basic_rx::set_pga(int,
double)':
[etc.]
This happens when you use libusb 0.1.12 on Cygwin, as explained in
http://www.gnuradio.org/trac/ticket/145. One solution is to configure
with
CPPFLAGS=-DNOMINMAX ./configure [your options here]
-- Don
--
Mohammad Hamed Firooz
ECE Department, U of Utah
Salt Lake City
UT, 48112
----- End forwarded message -----
--
Mohammad Hamed Firooz
ECE Department, U of Utah
Salt Lake City
UT, 48112