RE: [Discuss-gnuradio] How to get ready for the USRP2

[Clark Pope]

Does the Webpack ISE work or is a full ISE install required?
 
Thanks,
Clark

> Date: Tue, 15 Jan 2008 16:38:36 -0800
> From: address@hidden
> To: address@hidden
> Subject: [Discuss-gnuradio] How to get ready for the USRP2
>
>
>
> For those who plan to get a USRP2 when they are ready, here are some
> steps you can do to make sure you and your computer are ready.
>
> 1 Make sure your computer has Gigabit ethernet, preferably built into
> the mainboard or on the PCI Express bus. If your primary network
> connection is that same ethernet port, you may want to get an additional
> PCI Express Gigabit ethernet board.
>
>
> 2 Get and/or build Microblaze-gcc cross compilers from here:
>
> http://www.petalogix.com/news_events/petalinux_public_release
>
>
> 3 If you plan to do your own FPGA development, download and install
> the latest ISE tools from Xilinx. If you have trouble, here are some tips:
>
> http://gnuradio.org/trac/wiki/ISEonFC6
>
>
> 4 Again, if you plan to do your own FPGA development, download and
> install Icarus Verilog and GTKWave. You will need a recent snapshot of
> both.
>
>
> 5 Check out the USRP2 repository
>
> svn co http://gnuradio.org/svn/usrp2/trunk usrp2
>
> 6 Explore the code.
>
> Matt
>
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio

---

Watch “Cause Effect,” a show about real people making a real difference. Learn more