[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Strobe signals
From: |
Sebastiaan Heunis |
Subject: |
[Discuss-gnuradio] Strobe signals |
Date: |
Mon, 11 Aug 2008 01:53:56 +0200 |
Hi
I read a lot of the USRP's Verilog lately and sort of figured out what
happens on the FPGA. master_control.v generates all the control
signals as far as I understand. I would just like to know how the
strobe signals work.
Looking at master_control.v it seems as if rx_sample_strobe is always
1. strobe_decim is a clock signal (if decim=8, strobe_decim is going
to be an 8MHz clock)? Is this correct? hb_strobe is going to be a
4MHz clock then and is used to tell the rx buffer how often we have
samples available for the USB link?
Thank you.
Sebastiaan
- [Discuss-gnuradio] Strobe signals,
Sebastiaan Heunis <=