Re: [Discuss-gnuradio] USRP Schematic disaccord with real board

[Matt Ettus]

I don't know what schematics you are looking at, but the ones posted are 
exactly what has been built. 

Matt

PAtrick Gerber wrote:
> Hello all,
>
> I have bought an USRP board from Ettus Research with different radio 
> daugtherboards.
> I have made some measurement on this board around the clock distribution. 
>
> I think my board does not exactly comply with it's schematic (from the 
> GNU Radio Trac). For example on the schematic, the clock out SMA 
> connector is connected on pin 23 of the AD9513. On my board I can see 
> that the same connector is connected to the pin 27 of the AD9513. This 
> second connection seems better than the one in the schematic.
>
> Where can I find the right schematics for my USRP board (rev. 4.5) 
> and/or the latest version of the USRP schematics ?
>
> Thanks in advance.
>
> Patrick
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>