Huzzah! It works! I did have the older Flex 2400 daughtercard so I
moved the resistors around and re burned it. It now works great.
Thanks to everyone who helped out, especially Matt and Jonathan!
-Leslie
On Thu, Feb 5, 2009 at 11:31 AM, Matt Ettus <address@hidden> wrote:
Leslie Choong wrote:
Thanks to Johnathan's help it seems my problem is with the USRP2's
recognition of the daughterboard. I used a USRP1 Rev 4.1 to flash my
FLEX 2400 to the rfx2400 EEPROM using this command:
./burn-db-eeprom -A -t rfx2400 --force
Also, are X1 and X101 populated on your RFX2400? If so, you have a very old
non-MIMO_B version, which is probably why you saw this problem in the first
place. If so, you will need to follow the directions here:
http://gnuradio.org/trac/wiki/USRPClockingNotes
Look under Flex2400.
Matt
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio