That's good news.
The code I sent seemed to be working but i realy didn't tested it. We
have only one USRP2 here and we were trying to receive pkts using a
802.11b PCI card (Realtek RTL8180L chipset), but without success (some
problems with the card configuration).
2009/4/17 Valerio, Danilo <address@hidden <mailto:address@hidden>>
We have also tried without success.
We have used the TX path from Tiago and a modified version of the
RX path (firmware and FPGA at their latest update).
I also felt confident that the the TX path works, and consequently
that the RX path had some problem.
So we have tried to transmit with the USRP2 and receive with a
real IEEE802.11 chipset (Ralink chipset RT2500).
This chipset has no firmware and we modified the linux driver so
- avoid mac CRC (Everything received on the MAC layer is passed to
the higher layers);
- set fixed modulation schemes (i.e. DBPSK 1Mbps);
- set PLCP long preamble.
- set complete monitor/passive mode.
The chipset detects some transmitted frames. This could be an
indication that the PLCP preamble/header is correct (?).
However the PLCP payload is just rubbish.
We have also tried to submit stupid payloads (like ffffffff) and I
have the impression that what we receive is just random. :-(
If we obtain some successful result in the next few days, I'll let
On Friday 17 April 2009 09:17:38 Colby Boyer wrote:
> Hi All,
> I've been trying to run some hardware tests between two USRP2s,
but I have
> had no success in receiving packets. I am using the modified TX
> I feel sorta confident that the TX code works, because when I
> usrp2_fft.py, I see a wave form being transmitted over the channel.
> Has anyone have any success on receiving packets between two
> RX/TX there is a usrp2::ctor reset db failed error. Could this cause
> problems for the RX/TX? I am using the firmware that was shipped
> Colby Boyer
> On Wed, Apr 15, 2009 at 10:40 AM, Ben Yahmed <
> > Hi all,
> > Since I have tested the tx code (bbn_80211b_tx_port2.py), I
wanted to run
> > the bbn_80211b_rx.py inorder to capture the packets sent but I
> > this error:
> > # ./bbn_80211b_rx.py Traceback (most recent call last):
> > File "./bbn_80211b_rx.py", line 179, in <module>
> > main ()
> > File "./bbn_80211b_rx.py", line 174, in main
> > app = app_flow_graph()
> > File "./bbn_80211b_rx.py", line 159, in __init__
> > self.u = usrp_rx(0, options.decim, options.rx_subdev_spec,
> > options.width_16, options.verbose, options.gain, options.freq)
> > File "./bbn_80211b_rx.py", line 97, in __init__
> > self.u.set_decim(decim_rate=(decim * 1.5))
> > File
"/usr/local/lib/python2.5/site-packages/gnuradio/usrp2.py", line 499,
> > in set_decim
> > return _usrp2.usrp2_source_32fc_sptr_set_decim(self, *args,
> > TypeError: usrp2_source_32fc_sptr_set_decim() takes exactly 2
> > given)
> > do you have any idea about the origin of this problem? Thank
> > advance.
> > On Mon, Apr 06, 2009 at 04:29:20PM -0300, Tiago Rogério Mück
> >> / Updated from the trunk and I'm not getting that msg anymore./
> >> / /
> >> / Everything seems to be ok now./
> > Glad to hear it! Thanks for letting us know.
> > Eric
Discuss-gnuradio mailing list
Discuss-gnuradio mailing list