[Discuss-gnuradio] Compiling gnu radio, xmlto

[Andrew Gilbett]

Hi,
I am attempting to get gnuradio working on a fresh install of Suse 11.1 64 bit.
I am getting the error that is shown in the "make output" section below.
I initially attempted to run "./configure --disable-docs" but this
still resulted in the same error...

This appears to be dealt with here
http://lists.gnu.org/archive/html/discuss-gnuradio/2008-05/msg00163.html
and here
http://www.opensubscriber.com/message/address@hidden/9515539.html
though they specifically deal with a cygwin install...
I have tried the recomended path of action in the first link which was
to rename /usr/bin/xmlto to which seems to sort of work but dies with
the output that is in the "make ver2 section" below.

If someone has been sucessful with a suse 11.1 64bit install please
let me know other wise if someone could point out what I am doing
wrong that would be great as well. If you need more info then please
ask as I would like to make this work.

I am running an Athlon64 X2 with 2 gb of ram.

I have previously installed an old version of gnuradio on a very old
linux distro (long enough ago that I dont remember what it was but it
was on a P3 450!) and I am investigating using it for my undergraduate
Electrical Engineering thesis.

Thanks
Andrew
address@hidden


Configure output:
*********************************************************************
The following components were skipped either because you asked not
to build them or they didn't pass configuration checks:

usrp2-firmware

These components will not be built.


*********************************************************************
The following GNU Radio components have been successfully configured:

config
gruel
omnithread
gnuradio-core
pmt
mblock
usrp
usrp2
gr-usrp
gr-usrp2
gr-audio-alsa
gr-audio-jack
gr-audio-oss
gr-audio-portaudio
gr-cvsd-vocoder
gr-gpio
gr-gsm-fr-vocoder
gr-pager
gr-radar-mono
gr-radio-astronomy
gr-trellis
gr-video-sdl
gr-wxgui
gr-qtgui
gr-sounder
gr-utils
gnuradio-examples
grc

You my now run the make command to build these components.

*********************************************************************
The following components were skipped either because you asked not
to build them or they didn't pass configuration checks:

gcell
gr-gcell
gr-audio-osx
gr-audio-windows
docs

These components will not be built.



Make output:
Generating XML output for file usrper.cc
Generate XML output for dir /builddir/gnuradio/usrp/host/apps/
Generate XML output for dir /builddir/gnuradio/usrp/host/
Generate XML output for dir /builddir/gnuradio/usrp/host/lib/legacy/
Generate XML output for dir /builddir/gnuradio/usrp/host/lib/
Generate XML output for dir /builddir/gnuradio/usrp/host/misc/
Generating XML output for the main page
xmlto html-nochunks ../../usrp/doc/usrp_guide.xml
xmlto: input does not validate (status 3)
/builddir/gnuradio/usrp/doc/../../usrp/doc/usrp_guide.xml:4: warning:
failed to load external entity
"/builddir/gnuradio/usrp/doc/docbookx.dtd"
]>
  ^
warning: failed to load external entity
"/builddir/gnuradio/usrp/doc/docbookx.dtd"
validity error : Could not load the external subset "docbookx.dtd"
Document /builddir/gnuradio/usrp/doc/../../usrp/doc/usrp_guide.xml
does not validate
make[4]: *** [usrp_guide.html] Error 3
make[4]: Leaving directory `/builddir/gnuradio/usrp/doc'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/builddir/gnuradio/usrp/doc'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/builddir/gnuradio/usrp'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/builddir/gnuradio'
make: *** [all] Error 2



make ver2 output:

In file included from FrequencyDisplayPlot.cc:4:
./FrequencyDisplayPlot.h:4:22: error: qwt_plot.h: No such file or
directory
./FrequencyDisplayPlot.h:5:25: error: qwt_painter.h: No such file or
directory
./FrequencyDisplayPlot.h:6:29: error: qwt_plot_canvas.h: No such file
or directory
./FrequencyDisplayPlot.h:7:28: error: qwt_plot_curve.h: No such file
or directory
./FrequencyDisplayPlot.h:8:30: error: qwt_scale_engine.h: No such file
or directory
./FrequencyDisplayPlot.h:9:30: error: qwt_scale_widget.h: No such file
or directory
./FrequencyDisplayPlot.h:10:29: error: qwt_plot_zoomer.h: No such file
or directory
./FrequencyDisplayPlot.h:11:29: error: qwt_plot_panner.h: No such file
or directory
./FrequencyDisplayPlot.h:12:29: error: qwt_plot_marker.h: No such file
or directory
./FrequencyDisplayPlot.h:14:24: error: qwt_symbol.h: No such file or
directory
FrequencyDisplayPlot.cc:6:28: error: qwt_scale_draw.h: No such file or
directory
In file included from FrequencyDisplayPlot.cc:4:
./FrequencyDisplayPlot.h:16: error: expected class-name before ‘{’
token
./FrequencyDisplayPlot.h:17: error: ISO C++ forbids declaration of
‘Q_OBJECT’ with no type
./FrequencyDisplayPlot.h:19: error: expected ‘;’ before ‘public’
./FrequencyDisplayPlot.h:26: error: expected unqualified-id before ‘&’
token
./FrequencyDisplayPlot.h:26: error: expected ‘,’ or ‘...’ before ‘&’
token
./FrequencyDisplayPlot.h:30: error: expected ‘,’ or ‘...’ before
‘numDataPoints’
./FrequencyDisplayPlot.h:32: error: ISO C++ forbids declaration of
‘int64_t’ with no type
./FrequencyDisplayPlot.h:44: error: expected `:' before ‘slots’
./FrequencyDisplayPlot.h:45: error: expected primary-expression before
‘void’
./FrequencyDisplayPlot.h:45: error: ISO C++ forbids declaration of
‘slots’ with no type
./FrequencyDisplayPlot.h:45: error: expected ‘;’ before ‘void’
./FrequencyDisplayPlot.h:56: error: ISO C++ forbids declaration of
‘QwtPlotCurve’ with no type
./FrequencyDisplayPlot.h:56: error: expected ‘;’ before ‘*’ token
./FrequencyDisplayPlot.h:57: error: ISO C++ forbids declaration of
‘QwtPlotCurve’ with no type
./FrequencyDisplayPlot.h:57: error: expected ‘;’ before ‘*’ token
./FrequencyDisplayPlot.h:58: error: ISO C++ forbids declaration of
‘QwtPlotCurve’ with no type
./FrequencyDisplayPlot.h:58: error: expected ‘;’ before ‘*’ token
./FrequencyDisplayPlot.h:60: error: ISO C++ forbids declaration of
‘QwtPlotMarker’ with no type
./FrequencyDisplayPlot.h:60: error: expected ‘;’ before ‘*’ token
./FrequencyDisplayPlot.h:61: error: ISO C++ forbids declaration of
‘QwtPlotMarker’ with no type
./FrequencyDisplayPlot.h:61: error: expected ‘;’ before ‘*’ token
./FrequencyDisplayPlot.h:63: error: ISO C++ forbids declaration of
‘QwtPlotPanner’ with no type
./FrequencyDisplayPlot.h:63: error: expected ‘;’ before ‘*’ token
./FrequencyDisplayPlot.h:64: error: ISO C++ forbids declaration of
‘QwtPlotZoomer’ with no type
./FrequencyDisplayPlot.h:64: error: expected ‘;’ before ‘*’ token
./FrequencyDisplayPlot.h:66: error: ISO C++ forbids declaration of
‘QwtPlotMarker’ with no type
./FrequencyDisplayPlot.h:66: error: expected ‘;’ before ‘*’ token
./FrequencyDisplayPlot.h:67: error: ISO C++ forbids declaration of
‘QwtPlotMarker’ with no type
./FrequencyDisplayPlot.h:67: error: expected ‘;’ before ‘*’ token
./FrequencyDisplayPlot.h:74: error: ‘int64_t’ does not name a type
FrequencyDisplayPlot.cc:36: error: expected class-name before ‘,’ token
FrequencyDisplayPlot.cc:48: error: ‘QwtText’ does not name a type
FrequencyDisplayPlot.cc: In constructor
‘FreqDisplayScaleDraw::FreqDisplayScaleDraw(unsigned int)’:
FrequencyDisplayPlot.cc:40: error: class ‘FreqDisplayScaleDraw’ does
not have any field named ‘QwtScaleDraw’
FrequencyDisplayPlot.cc: At global scope:
FrequencyDisplayPlot.cc:59: error: expected class-name before ‘,’ token
FrequencyDisplayPlot.cc:62: error: expected `)' before ‘*’ token
FrequencyDisplayPlot.cc:77: error: ‘QwtText’ does not name a type
FrequencyDisplayPlot.cc: In member function ‘virtual void
FreqDisplayZoomer::updateTrackerText()’:
FrequencyDisplayPlot.cc:73: error: ‘updateDisplay’ was not declared in
this scope
FrequencyDisplayPlot.cc: At global scope:
FrequencyDisplayPlot.cc:85: error: expected `)' before ‘*’ token
make[5]: *** [FrequencyDisplayPlot.lo] Error 1
make[5]: Leaving directory `/builddir/gnuradio-3.2/gr-qtgui/src/lib'
make[4]: *** [all] Error 2
make[4]: Leaving directory `/builddir/gnuradio-3.2/gr-qtgui/src/lib'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/builddir/gnuradio-3.2/gr-qtgui/src'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/builddir/gnuradio-3.2/gr-qtgui'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/builddir/gnuradio-3.2'
make: *** [all] Error 2