Re: [Discuss-gnuradio] Problem in executing GRC

[udadidd]

0) Which grc returned : "/usr/local/bin/grc"
1) Removed grc from the same 
2) "which grc" again does not return any file
3) sudo make install -C grc returns : "make: *** grc: No such file or
directory.  Stop."

Do i have to configure, make and make install?

Thanks for the Support!
Udaya


Josh Blum-2 wrote:
> 
> its possible that you have the grc executable installed twice, and the 
> older one is taking precedence.
> 
> 0) Run the command: which grc
> 
> 1) What path does that return? Then remove that file.
> 
> 2) Run which grc again, is there a file? Remove that
> 
> 3) Run sudo make install -C grc
> 
> 
> udadidd wrote:
>> a) I ran the command : "python -c ..." and it DOES NOT give any error!
>> b) I do find a folder gnuradio in the path :
>> "/opt/gnuradio/lib/python2.5/site-packages"
>> 
>> 
>> 
>> 
>> Josh Blum-2 wrote:
>>> run this on the command line
>>>
>>> python -c "from gnuradio import gr"
>>>
>>> does it give an error? If so, python cannot find gnuradio. Is there a 
>>> folder called gnuradio in 
>>> /opt/local/lib/python2.5/site-packages:/opt/gnuradio/lib/python2.5/site-packages?
>>>
>>>
>>> udadidd wrote:
>>>> Hi 
>>>> I could install grc successfully...
>>>> But when i try to execute it, i get the error:
>>>>
>>>> Xlib:  extension "RANDR" missing on display "/tmp/launch-zFqALC/:0".
>>>> Traceback (most recent call last):
>>>>   File "/usr/local/bin/grc", line 33, in <module>
>>>>     from gnuradio.grc.platforms.base.Constants import VERSION
>>>> ImportError: No module named grc.platforms.base.Constants
>>>>
>>>> a) I have checked my PYTHONPATH :
>>>> /opt/local/lib/python2.5/site-packages:/opt/gnuradio/lib/python2.5/site-packages
>>>> b) I have added 
>>>>      export BOOST_PREFIX=/opt/boost_1_38_0
>>>>      export LD_LIBRARY_PATH=$BOOST_PREFIX/lib
>>>> but i did not understand the sigificance of adding this as i do not
>>>> find
>>>> a
>>>> folder of boost_1_38_0 in the /opt directory!!
>>>>
>>> where did you install boost?
>>>
>>>> I still cannot execute the grc on my command prompt!!
>>>>
>>>> Kindly help!
>>>>
>>>>
>>>> Somya Ajmera wrote:
>>>>> Hi , I am facing
>>>>> a problem in installing gnuradio-3.2. I was able to install
>>>>> gnuradio-3.1.3 properly but when I tried to install this  newer
>>>>> version
>>>>> on the top of the older version, maximum of the packages are not
>>>>> getting configured including gnuradio-core and usrp. 
>>>>>
>>>>> When I
>>>>> started installing this newer version I faced the same problem with
>>>>> the
>>>>> major packages, then one of my friend suggested to add the library
>>>>> path
>>>>> for some missing packages (mainly gsl-which was already installed on
>>>>> my
>>>>> system but the configure script was not able to detect it) and then by
>>>>> doing that I was able to get maximum of them configured and then I did
>>>>> the usual make, make check and make install. After that when I tried
>>>>> to
>>>>> run grc it got the following error :
>>>>>
>>>>> Traceback (most recent call last):
>>>>>   File "/usr/local/bin/grc", line 25, in <module>
>>>>>     from gnuradio.grc.platforms.base.Constants import VERSION
>>>>> ImportError: No module named grc.platforms.base.Constants
>>>>> address@hidden gnuradio]# 
>>>>>
>>>>> As
>>>>> you suggested in the reply, I sett ed the path for Python, but was not
>>>>> able to get it over. but I was able to run any other python example
>>>>> namely the audio_tone one.Then I again tried to configure the newer
>>>>> version without adding any library path but faced the same problem
>>>>> with
>>>>> the packages.  
>>>>>
>>>>> I am attaching the log ./configure file for the reference (open it
>>>>> with
>>>>> word pad). I am a newbie to Linux and to gnuradio. I would really
>>>>> appreciate if anybody can help me regarding this matter.
>>>>>
>>>>> Thanks & Regards,
>>>>> Somya Ajmera
>>>>>
>>>>>
>>>>>       New Email addresses available on Yahoo!
>>>>> Get the Email name you&#39;ve always wanted on the new @ymail and
>>>>> @rocketmail. 
>>>>> Hurry before someone else does!
>>>>> http://mail.promotions.yahoo.com/newdomains/aa/
>>>>> checking for getrusage... yes
>>>>> checking for sched_setscheduler... (cached) yes
>>>>> checking for pthread_setschedparam... yes
>>>>> checking for sigaction... (cached) yes
>>>>> checking for snprintf... (cached) yes
>>>>> checking for USB... no
>>>>> checking usb.h usability... yes
>>>>> checking usb.h presence... yes
>>>>> checking for usb.h... yes
>>>>> checking for library containing usb_bulk_write... -lusb
>>>>> checking for sdcc... no
>>>>> checking for asx8051... no
>>>>> USRP requires sdcc. sdcc not found. See http://sdcc.sf.net
>>>>> Unable to find firmware compiler SDCC.
>>>>> Not building component usrp.
>>>>> checking whether host_os is linux*... yes
>>>>> checking for arpa/inet.h... (cached) yes
>>>>> checking for byteswap.h... (cached) yes
>>>>> checking linux/if_packet.h usability... yes
>>>>> checking linux/if_packet.h presence... yes
>>>>> checking for linux/if_packet.h... yes
>>>>> checking sys/socket.h usability... yes
>>>>> checking sys/socket.h presence... yes
>>>>> checking for sys/socket.h... yes
>>>>> checking sys/un.h usability... yes
>>>>> checking sys/un.h presence... yes
>>>>> checking for sys/un.h... yes
>>>>> checking for struct msghdr.msg_control... yes
>>>>> checking for struct msghdr.msg_accrights... no
>>>>> checking for struct cmsgcred.cmcred_uid... no
>>>>> checking for struct ucred.uid... yes
>>>>> Component usrp2 passed configuration checks; building.
>>>>> Component gr-usrp requires usrp, which is not being built or specified
>>>>> via
>>>>> pre-installed files.
>>>>> Not building component gr-usrp.
>>>>> Component gr-usrp2 requires gnuradio-core, which is not being built or
>>>>> specified via pre-installed files.
>>>>> Not building component gr-usrp2.
>>>>> Component gr-gcell requires gcell, which is not being built or
>>>>> specified
>>>>> via pre-installed files.
>>>>> Not building component gr-gcell.
>>>>> Component gr-msdd6000 requires gnuradio-core, which is not being built
>>>>> or
>>>>> specified via pre-installed files.
>>>>> checking for netinet/in.h... (cached) yes
>>>>> checking for arpa/inet.h... (cached) yes
>>>>> checking for sys/socket.h... (cached) yes
>>>>> checking netdb.h usability... yes
>>>>> checking netdb.h presence... yes
>>>>> checking for netdb.h... yes
>>>>> Not building component gr-msdd6000.
>>>>> Component gr-audio-alsa requires gnuradio-core, which is not being
>>>>> built
>>>>> or specified via pre-installed files.
>>>>> Not building component gr-audio-alsa.
>>>>> Component gr-audio-jack requires gnuradio-core, which is not being
>>>>> built
>>>>> or specified via pre-installed files.
>>>>> Not building component gr-audio-jack.
>>>>> Component gr-audio-oss requires gnuradio-core, which is not being
>>>>> built
>>>>> or
>>>>> specified via pre-installed files.
>>>>> Not building component gr-audio-oss.
>>>>> Component gr-audio-osx requires gnuradio-core, which is not being
>>>>> built
>>>>> or
>>>>> specified via pre-installed files.
>>>>> Not building component gr-audio-osx.
>>>>> Component gr-audio-portaudio requires gnuradio-core, which is not
>>>>> being
>>>>> built or specified via pre-installed files.
>>>>> Not building component gr-audio-portaudio.
>>>>> Component gr-audio-windows requires gnuradio-core, which is not being
>>>>> built or specified via pre-installed files.
>>>>> Not building component gr-audio-windows.
>>>>> Component gr-atsc requires gnuradio-core, which is not being built or
>>>>> specified via pre-installed files.
>>>>> Not building component gr-atsc.
>>>>> Component gr-comedi requires gnuradio-core, which is not being built
>>>>> or
>>>>> specified via pre-installed files.
>>>>> Not building component gr-comedi.
>>>>> Component gr-cvsd-vocoder requires gnuradio-core, which is not being
>>>>> built
>>>>> or specified via pre-installed files.
>>>>> Not building component gr-cvsd-vocoder.
>>>>> Component gr-gpio requires usrp, which is not being built or specified
>>>>> via
>>>>> pre-installed files.
>>>>> Not building component gr-gpio.
>>>>> Component gr-gsm-fr-vocoder requires gnuradio-core, which is not being
>>>>> built or specified via pre-installed files.
>>>>> Not building component gr-gsm-fr-vocoder.
>>>>> Component gr-pager requires gnuradio-core, which is not being built or
>>>>> specified via pre-installed files.
>>>>> Not building component gr-pager.
>>>>> Component gr-radar-mono requires usrp, which is not being built or
>>>>> specified via pre-installed files.
>>>>> Not building component gr-radar-mono.
>>>>> Component gr-radio-astronomy requires gnuradio-core, which is not
>>>>> being
>>>>> built or specified via pre-installed files.
>>>>> Not building component gr-radio-astronomy.
>>>>> Component gr-trellis requires gnuradio-core, which is not being built
>>>>> or
>>>>> specified via pre-installed files.
>>>>> Not building component gr-trellis.
>>>>> Component gr-video-sdl requires gnuradio-core, which is not being
>>>>> built
>>>>> or
>>>>> specified via pre-installed files.
>>>>> Not building component gr-video-sdl.
>>>>> Component gr-wxgui requires gnuradio-core, which is not being built or
>>>>> specified via pre-installed files.
>>>>> Not building component gr-wxgui.
>>>>> Component gr-qtgui requires gnuradio-core, which is not being built or
>>>>> specified via pre-installed files.
>>>>> Not building component gr-qtgui.
>>>>> Component gr-sounder requires usrp, which is not being built or
>>>>> specified
>>>>> via pre-installed files.
>>>>> Not building component gr-sounder.
>>>>> Component gr-utils requires gnuradio-core, which is not being built or
>>>>> specified via pre-installed files.
>>>>> Not building component gr-utils.
>>>>> Component gnuradio-examples requires gnuradio-core, which is not being
>>>>> built or specified via pre-installed files.
>>>>> Not building component gnuradio-examples.
>>>>> Component grc requires gr-wxgui, which is not being built or specified
>>>>> via
>>>>> pre-installed files.
>>>>> checking for xdg-mime... true
>>>>> Not building component grc.
>>>>> checking whether gcc accepts -Wall... yes
>>>>> checking whether gcc accepts -Werror-implicit-function-declaration...
>>>>> yes
>>>>> checking whether g++ accepts -Wall... yes
>>>>> checking whether g++ accepts -Woverloaded-virtual... yes
>>>>> configure: creating ./config.status
>>>>> config.status: creating gruel/Makefile
>>>>> config.status: creating gruel/gruel.pc
>>>>> config.status: creating gruel/src/Makefile
>>>>> config.status: creating gruel/src/include/Makefile
>>>>> config.status: creating gruel/src/include/gruel/Makefile
>>>>> config.status: creating gruel/src/include/gruel/inet.h
>>>>> config.status: creating gruel/src/lib/Makefile
>>>>> config.status: creating omnithread/Makefile
>>>>> config.status: creating omnithread/gnuradio/Makefile
>>>>> config.status: creating omnithread/gnuradio-omnithread.pc
>>>>> config.status: creating gcell/Makefile
>>>>> config.status: creating gcell/gcell.pc
>>>>> config.status: creating gcell/gcell_spu.pc
>>>>> config.status: creating gcell/include/Makefile
>>>>> config.status: creating gcell/include/gcell/Makefile
>>>>> config.status: creating gcell/include/gcell/spu/Makefile
>>>>> config.status: creating gcell/lib/Makefile
>>>>> config.status: creating gcell/lib/spu/Makefile
>>>>> config.status: creating gcell/lib/general/Makefile
>>>>> config.status: creating gcell/lib/wrapper/Makefile
>>>>> config.status: creating gcell/lib/runtime/Makefile
>>>>> config.status: creating gcell/apps/Makefile
>>>>> config.status: creating gcell/apps/spu/Makefile
>>>>> config.status: creating gcell/ibm/Makefile
>>>>> config.status: creating gnuradio-core/Makefile
>>>>> config.status: creating gnuradio-core/gnuradio-core.pc
>>>>> config.status: creating gnuradio-core/doc/Doxyfile
>>>>> config.status: creating gnuradio-core/doc/Makefile
>>>>> config.status: creating gnuradio-core/doc/other/Makefile
>>>>> config.status: creating gnuradio-core/doc/xml-swig/Makefile
>>>>> config.status: creating gnuradio-core/src/Makefile
>>>>> config.status: creating
>>>>> gnuradio-core/src/gen_interpolator_taps/Makefile
>>>>> config.status: creating gnuradio-core/src/lib/Makefile
>>>>> config.status: creating gnuradio-core/src/lib/filter/Makefile
>>>>> config.status: creating gnuradio-core/src/lib/g72x/Makefile
>>>>> config.status: creating gnuradio-core/src/lib/general/Makefile
>>>>> config.status: creating gnuradio-core/src/lib/general/gr_prefix.cc
>>>>> config.status: creating gnuradio-core/src/lib/gengen/Makefile
>>>>> config.status: creating gnuradio-core/src/lib/io/Makefile
>>>>> config.status: creating gnuradio-core/src/lib/missing/Makefile
>>>>> config.status: creating gnuradio-core/src/lib/reed-solomon/Makefile
>>>>> config.status: creating gnuradio-core/src/lib/viterbi/Makefile
>>>>> config.status: creating gnuradio-core/src/lib/runtime/Makefile
>>>>> config.status: creating gnuradio-core/src/lib/swig/Makefile
>>>>> config.status: creating gnuradio-core/src/python/Makefile
>>>>> config.status: creating gnuradio-core/src/python/bin/Makefile
>>>>> config.status: creating gnuradio-core/src/python/gnuradio/Makefile
>>>>> config.status: creating
>>>>> gnuradio-core/src/python/gnuradio/blks2/Makefile
>>>>> config.status: creating
>>>>> gnuradio-core/src/python/gnuradio/blks2impl/Makefile
>>>>> config.status: creating gnuradio-core/src/python/gnuradio/gr/Makefile
>>>>> config.status: creating gnuradio-core/src/python/gnuradio/gr/run_tests
>>>>> config.status: creating gnuradio-core/src/python/gnuradio/gru/Makefile
>>>>> config.status: creating
>>>>> gnuradio-core/src/python/gnuradio/gruimpl/Makefile
>>>>> config.status: creating
>>>>> gnuradio-core/src/python/gnuradio/vocoder/Makefile
>>>>> config.status: creating gnuradio-core/src/tests/Makefile
>>>>> config.status: creating gnuradio-core/src/utils/Makefile
>>>>> config.status: creating pmt/Makefile
>>>>> config.status: creating pmt/pmt.pc
>>>>> config.status: creating pmt/doc/Makefile
>>>>> config.status: creating pmt/src/Makefile
>>>>> config.status: creating pmt/src/lib/Makefile
>>>>> config.status: creating pmt/src/scheme/Makefile
>>>>> config.status: creating pmt/src/scheme/gnuradio/Makefile
>>>>> config.status: creating mblock/Makefile
>>>>> config.status: creating mblock/mblock.pc
>>>>> config.status: creating mblock/doc/Makefile
>>>>> config.status: creating mblock/src/Makefile
>>>>> config.status: creating mblock/src/include/Makefile
>>>>> config.status: creating mblock/src/include/mblock/Makefile
>>>>> config.status: creating mblock/src/lib/Makefile
>>>>> config.status: creating mblock/src/scheme/Makefile
>>>>> config.status: creating mblock/src/scheme/gnuradio/Makefile
>>>>> config.status: creating usrp/Makefile
>>>>> config.status: creating usrp/usrp.pc
>>>>> config.status: creating usrp/usrp-inband.pc
>>>>> config.status: creating usrp/usrp.iss
>>>>> config.status: creating usrp/doc/Doxyfile
>>>>> config.status: creating usrp/doc/Makefile
>>>>> config.status: creating usrp/doc/other/Makefile
>>>>> config.status: creating usrp/host/Makefile
>>>>> config.status: creating usrp/host/misc/Makefile
>>>>> config.status: creating usrp/host/lib/Makefile
>>>>> config.status: creating usrp/host/lib/inband/Makefile
>>>>> config.status: creating usrp/host/lib/legacy/Makefile
>>>>> config.status: creating usrp/host/lib/legacy/std_paths.h
>>>>> config.status: creating usrp/host/swig/Makefile
>>>>> config.status: creating usrp/host/apps/Makefile
>>>>> config.status: creating usrp/host/apps-inband/Makefile
>>>>> config.status: creating usrp/firmware/Makefile
>>>>> config.status: creating usrp/firmware/include/Makefile
>>>>> config.status: creating usrp/firmware/lib/Makefile
>>>>> config.status: creating usrp/firmware/src/Makefile
>>>>> config.status: creating usrp/firmware/src/common/Makefile
>>>>> config.status: creating usrp/firmware/src/usrp2/Makefile
>>>>> config.status: creating usrp/fpga/Makefile
>>>>> config.status: creating usrp/fpga/rbf/Makefile
>>>>> config.status: creating usrp/fpga/rbf/rev2/Makefile
>>>>> config.status: creating usrp/fpga/rbf/rev4/Makefile
>>>>> config.status: creating usrp2/Makefile
>>>>> config.status: creating usrp2/host/Makefile
>>>>> config.status: creating usrp2/host/usrp2.pc
>>>>> config.status: creating usrp2/host/include/Makefile
>>>>> config.status: creating usrp2/host/include/usrp2/Makefile
>>>>> config.status: creating usrp2/host/lib/Makefile
>>>>> config.status: creating usrp2/host/apps/Makefile
>>>>> config.status: creating gr-usrp/Makefile
>>>>> config.status: creating gr-usrp/gnuradio-usrp.pc
>>>>> config.status: creating gr-usrp/src/Makefile
>>>>> config.status: creating gr-usrp/src/run_tests
>>>>> config.status: creating gr-usrp/apps/Makefile
>>>>> config.status: creating gr-usrp2/Makefile
>>>>> config.status: creating gr-usrp2/src/Makefile
>>>>> config.status: creating gr-usrp2/src/run_tests
>>>>> config.status: creating gr-gcell/Makefile
>>>>> config.status: creating gr-gcell/src/Makefile
>>>>> config.status: creating gr-gcell/src/examples/Makefile
>>>>> config.status: creating gr-gcell/src/run_tests
>>>>> config.status: creating gr-msdd6000/Makefile
>>>>> config.status: creating gr-msdd6000/src/Makefile
>>>>> config.status: creating gr-audio-alsa/Makefile
>>>>> config.status: creating gr-audio-alsa/gr-audio-alsa.pc
>>>>> config.status: creating gr-audio-alsa/src/Makefile
>>>>> config.status: creating gr-audio-alsa/src/run_tests
>>>>> config.status: creating gr-audio-jack/Makefile
>>>>> config.status: creating gr-audio-jack/src/Makefile
>>>>> config.status: creating gr-audio-jack/src/run_tests
>>>>> config.status: creating gr-audio-oss/Makefile
>>>>> config.status: creating gr-audio-oss/src/Makefile
>>>>> config.status: creating gr-audio-oss/src/run_tests
>>>>> config.status: creating gr-audio-osx/Makefile
>>>>> config.status: creating gr-audio-osx/src/Makefile
>>>>> config.status: creating gr-audio-osx/src/run_tests
>>>>> config.status: creating gr-audio-portaudio/Makefile
>>>>> config.status: creating gr-audio-portaudio/src/Makefile
>>>>> config.status: creating gr-audio-portaudio/src/run_tests
>>>>> config.status: creating gr-audio-windows/Makefile
>>>>> config.status: creating gr-audio-windows/src/Makefile
>>>>> config.status: creating gr-audio-windows/src/run_tests
>>>>> config.status: creating gr-atsc/Makefile
>>>>> config.status: creating gr-atsc/doc/Makefile
>>>>> config.status: creating gr-atsc/src/Makefile
>>>>> config.status: creating gr-atsc/src/lib/Makefile
>>>>> config.status: creating gr-atsc/src/python/Makefile
>>>>> config.status: creating gr-atsc/src/python/run_tests
>>>>> config.status: creating gr-comedi/Makefile
>>>>> config.status: creating gr-comedi/src/Makefile
>>>>> config.status: creating gr-comedi/src/run_tests
>>>>> config.status: creating gr-cvsd-vocoder/Makefile
>>>>> config.status: creating gr-cvsd-vocoder/src/Makefile
>>>>> config.status: creating gr-cvsd-vocoder/src/lib/Makefile
>>>>> config.status: creating gr-cvsd-vocoder/src/python/Makefile
>>>>> config.status: creating gr-cvsd-vocoder/src/python/run_tests
>>>>> config.status: creating gr-gpio/Makefile
>>>>> config.status: creating gr-gpio/src/Makefile
>>>>> config.status: creating gr-gpio/src/fpga/Makefile
>>>>> config.status: creating gr-gpio/src/fpga/include/Makefile
>>>>> config.status: creating gr-gpio/src/fpga/top/Makefile
>>>>> config.status: creating gr-gpio/src/fpga/lib/Makefile
>>>>> config.status: creating gr-gpio/src/fpga/rbf/Makefile
>>>>> config.status: creating gr-gpio/src/python/Makefile
>>>>> config.status: creating gr-gsm-fr-vocoder/Makefile
>>>>> config.status: creating gr-gsm-fr-vocoder/src/Makefile
>>>>> config.status: creating gr-gsm-fr-vocoder/src/lib/Makefile
>>>>> config.status: creating gr-gsm-fr-vocoder/src/lib/gsm/Makefile
>>>>> config.status: creating gr-gsm-fr-vocoder/src/python/Makefile
>>>>> config.status: creating gr-gsm-fr-vocoder/src/python/run_tests
>>>>> config.status: creating gr-pager/Makefile
>>>>> config.status: creating gr-pager/src/Makefile
>>>>> config.status: creating gr-pager/src/run_tests
>>>>> config.status: creating gr-radar-mono/Makefile
>>>>> config.status: creating gr-radar-mono/doc/Makefile
>>>>> config.status: creating gr-radar-mono/src/Makefile
>>>>> config.status: creating gr-radar-mono/src/fpga/Makefile
>>>>> config.status: creating gr-radar-mono/src/fpga/top/Makefile
>>>>> config.status: creating gr-radar-mono/src/fpga/lib/Makefile
>>>>> config.status: creating gr-radar-mono/src/fpga/models/Makefile
>>>>> config.status: creating gr-radar-mono/src/fpga/tb/Makefile
>>>>> config.status: creating gr-radar-mono/src/lib/Makefile
>>>>> config.status: creating gr-radar-mono/src/python/Makefile
>>>>> config.status: creating gr-radar-mono/src/python/run_tests
>>>>> config.status: creating gr-radio-astronomy/Makefile
>>>>> config.status: creating gr-radio-astronomy/src/Makefile
>>>>> config.status: creating gr-radio-astronomy/src/lib/Makefile
>>>>> config.status: creating gr-radio-astronomy/src/python/Makefile
>>>>> config.status: creating gr-radio-astronomy/src/python/run_tests
>>>>> config.status: creating gr-trellis/Makefile
>>>>> config.status: creating gr-trellis/doc/Makefile
>>>>> config.status: creating gr-trellis/src/Makefile
>>>>> config.status: creating gr-trellis/src/lib/Makefile
>>>>> config.status: creating gr-trellis/src/python/Makefile
>>>>> config.status: creating gr-trellis/src/python/run_tests
>>>>> config.status: creating gr-trellis/src/examples/Makefile
>>>>> config.status: creating gr-trellis/src/examples/fsm_files/Makefile
>>>>> config.status: creating gr-video-sdl/Makefile
>>>>> config.status: creating gr-video-sdl/src/Makefile
>>>>> config.status: creating gr-video-sdl/src/run_tests
>>>>> config.status: creating gr-wxgui/Makefile
>>>>> config.status: creating gr-wxgui/gr-wxgui.pc
>>>>> config.status: creating gr-wxgui/src/Makefile
>>>>> config.status: creating gr-wxgui/src/python/Makefile
>>>>> config.status: creating gr-wxgui/src/python/plotter/Makefile
>>>>> config.status: creating gr-qtgui/Makefile
>>>>> config.status: creating gr-qtgui/src/Makefile
>>>>> config.status: creating gr-qtgui/src/lib/Makefile
>>>>> config.status: creating gr-qtgui/src/python/Makefile
>>>>> config.status: creating gr-sounder/Makefile
>>>>> config.status: creating gr-sounder/doc/Makefile
>>>>> config.status: creating gr-sounder/src/Makefile
>>>>> config.status: creating gr-sounder/src/fpga/Makefile
>>>>> config.status: creating gr-sounder/src/fpga/top/Makefile
>>>>> config.status: creating gr-sounder/src/fpga/lib/Makefile
>>>>> config.status: creating gr-sounder/src/fpga/tb/Makefile
>>>>> config.status: creating gr-sounder/src/lib/Makefile
>>>>> config.status: creating gr-sounder/src/python/Makefile
>>>>> config.status: creating gr-sounder/src/python/run_tests
>>>>> config.status: creating gr-utils/Makefile
>>>>> config.status: creating gr-utils/src/Makefile
>>>>> config.status: creating gr-utils/src/lib/Makefile
>>>>> config.status: creating gr-utils/src/python/Makefile
>>>>> config.status: creating gnuradio-examples/Makefile
>>>>> config.status: creating gnuradio-examples/c++/Makefile
>>>>> config.status: creating gnuradio-examples/python/Makefile
>>>>> config.status: creating
>>>>> gnuradio-examples/python/apps/hf_explorer/Makefile
>>>>> config.status: creating
>>>>> gnuradio-examples/python/apps/hf_radio/Makefile
>>>>> config.status: creating gnuradio-examples/python/apps/Makefile
>>>>> config.status: creating gnuradio-examples/python/audio/Makefile
>>>>> config.status: creating gnuradio-examples/python/digital/Makefile
>>>>> config.status: creating
>>>>> gnuradio-examples/python/digital_voice/Makefile
>>>>> config.status: creating gnuradio-examples/python/digital-bert/Makefile
>>>>> config.status: creating gnuradio-examples/python/mp-sched/Makefile
>>>>> config.status: creating
>>>>> gnuradio-examples/python/multi-antenna/Makefile
>>>>> config.status: creating gnuradio-examples/python/multi_usrp/Makefile
>>>>> config.status: creating gnuradio-examples/python/network/Makefile
>>>>> config.status: creating gnuradio-examples/python/ofdm/Makefile
>>>>> config.status: creating gnuradio-examples/python/usrp/Makefile
>>>>> config.status: creating gnuradio-examples/python/usrp2/Makefile
>>>>> config.status: creating grc/src/grc_gnuradio/Makefile
>>>>> config.status: creating grc/src/grc_gnuradio/wxgui/Makefile
>>>>> config.status: creating grc/src/grc_gnuradio/blks2/Makefile
>>>>> config.status: creating grc/src/grc_gnuradio/usrp/Makefile
>>>>> config.status: creating grc/src/Makefile
>>>>> config.status: creating grc/src/platforms/Makefile
>>>>> config.status: creating grc/src/platforms/base/Makefile
>>>>> config.status: creating grc/src/platforms/python/Makefile
>>>>> config.status: creating grc/src/platforms/python/utils/Makefile
>>>>> config.status: creating grc/src/platforms/gui/Makefile
>>>>> config.status: creating grc/src/utils/Makefile
>>>>> config.status: creating grc/src/gui/Makefile
>>>>> config.status: creating grc/examples/Makefile
>>>>> config.status: creating grc/examples/xmlrpc/Makefile
>>>>> config.status: creating grc/examples/usrp/Makefile
>>>>> config.status: creating grc/examples/audio/Makefile
>>>>> config.status: creating grc/examples/simple/Makefile
>>>>> config.status: creating grc/examples/trellis/Makefile
>>>>> config.status: creating grc/Makefile
>>>>> config.status: creating grc/data/Makefile
>>>>> config.status: creating grc/data/platforms/Makefile
>>>>> config.status: creating grc/data/platforms/base/Makefile
>>>>> config.status: creating grc/data/platforms/python/Makefile
>>>>> config.status: creating grc/data/platforms/python/blocks/Makefile
>>>>> config.status: creating grc/scripts/Makefile
>>>>> config.status: creating grc/freedesktop/Makefile
>>>>> config.status: creating Makefile
>>>>> config.status: creating run_tests.sh
>>>>> config.status: creating config/Makefile
>>>>> config.status: creating config.h
>>>>> config.status: executing depfiles commands
>>>>> config.status: executing libtool commands
>>>>> config.status: executing swig_deps commands
>>>>> config.status: executing swig_gcell_deps commands
>>>>> config.status: executing run_tests_build commands
>>>>> === configuring in usrp2/firmware
>>>>> (/home/somya/Download/gnuradio/usrp2/firmware)
>>>>> configure: running /bin/sh ./configure.gnu --disable-option-checking
>>>>> '--prefix=/usr/local'  --cache-file=/dev/null --srcdir=.
>>>>> configure: WARNING: If you wanted to set the --build type, don't use
>>>>> --host.
>>>>>     If a cross compiler is detected then cross compile mode will be
>>>>> used.
>>>>> checking for a BSD-compatible install... /usr/bin/install -c
>>>>> checking whether build environment is sane... yes
>>>>> checking for gawk... gawk
>>>>> checking whether make sets $(MAKE)... yes
>>>>> checking for mb-strip... no
>>>>> checking for strip... strip
>>>>> Component usrp2 passed configuration checks; building.
>>>>> checking for style of include used by make... GNU
>>>>> checking for mb-gcc... no
>>>>> checking for gcc... gcc
>>>>> checking for C compiler default output file name... a.out
>>>>> checking whether the C compiler works... yes
>>>>> checking whether we are cross compiling... no
>>>>> checking for suffix of executables... 
>>>>> checking for suffix of object files... o
>>>>> checking whether we are using the GNU C compiler... yes
>>>>> checking whether gcc accepts -g... yes
>>>>> checking for gcc option to accept ISO C89... none needed
>>>>> checking dependency style of gcc... gcc3
>>>>> checking how to run the C preprocessor... gcc -E
>>>>> checking for mb-ranlib... no
>>>>> checking for ranlib... ranlib
>>>>> checking for grep that handles long lines and -e... /bin/grep
>>>>> checking for egrep... /bin/grep -E
>>>>> checking for ANSI C header files... yes
>>>>> checking for sys/types.h... yes
>>>>> checking for sys/stat.h... yes
>>>>> checking for stdlib.h... yes
>>>>> checking for string.h... yes
>>>>> checking for memory.h... yes
>>>>> checking for strings.h... yes
>>>>> checking for inttypes.h... yes
>>>>> checking for stdint.h... yes
>>>>> checking for unistd.h... yes
>>>>> checking arpa/inet.h usability... yes
>>>>> checking arpa/inet.h presence... yes
>>>>> checking for arpa/inet.h... yes
>>>>> checking netinet/in.h usability... yes
>>>>> checking netinet/in.h presence... yes
>>>>> checking for netinet/in.h... yes
>>>>> checking byteswap.h usability... yes
>>>>> checking byteswap.h presence... yes
>>>>> checking for byteswap.h... yes
>>>>> checking whether byte ordering is bigendian... no
>>>>> checking for mb-gcc... no
>>>>> usrp2 firmware requires mb-gcc.  Not found
>>>>> Not building component usrp2-firmware.
>>>>> configure: creating ./config.status
>>>>> config.status: creating apps/Makefile
>>>>> config.status: creating include/Makefile
>>>>> config.status: creating lib/Makefile
>>>>> config.status: creating Makefile
>>>>> config.status: creating config/Makefile
>>>>> config.status: creating config.h
>>>>> config.status: executing depfiles commands
>>>>> *********************************************************************
>>>>> The following components were skipped either because you asked not
>>>>> to build them or they didn't pass configuration checks:
>>>>>
>>>>> usrp2-firmware
>>>>>
>>>>> These components will not be built.
>>>>>
>>>>>
>>>>> *********************************************************************
>>>>> The following GNU Radio components have been successfully configured:
>>>>>
>>>>> config
>>>>> gruel
>>>>> omnithread
>>>>> pmt
>>>>> mblock
>>>>> usrp2
>>>>>
>>>>> You my now run the make command to build these components.
>>>>>
>>>>> *********************************************************************
>>>>> The following components were skipped either because you asked not
>>>>> to build them or they didn't pass configuration checks:
>>>>>
>>>>> gcell
>>>>> gnuradio-core
>>>>> usrp
>>>>> gr-usrp
>>>>> gr-usrp2
>>>>> gr-gcell
>>>>> gr-msdd6000
>>>>> gr-audio-alsa
>>>>> gr-audio-jack
>>>>> gr-audio-oss
>>>>> gr-audio-osx
>>>>> gr-audio-portaudio
>>>>> gr-audio-windows
>>>>> gr-atsc
>>>>> gr-comedi
>>>>> gr-cvsd-vocoder
>>>>> gr-gpio
>>>>> gr-gsm-fr-vocoder
>>>>> gr-pager
>>>>> gr-radar-mono
>>>>> gr-radio-astronomy
>>>>> gr-trellis
>>>>> gr-video-sdl
>>>>> gr-wxgui
>>>>> gr-qtgui
>>>>> gr-sounder
>>>>> gr-utils
>>>>> gnuradio-examples
>>>>> grc
>>>>>
>>>>> These components will not be built.
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Discuss-gnuradio mailing list
>>>>> address@hidden
>>>>> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>>>>
>>>>>
>>>
>>> _______________________________________________
>>> Discuss-gnuradio mailing list
>>> address@hidden
>>> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>>
>>>
>> 
> 
> 
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> 
> 

-- 
View this message in context: 
http://www.nabble.com/Problem-in-Installing-gnuradio-3.2-tp22518659p24348413.html
Sent from the GnuRadio mailing list archive at Nabble.com.