[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] using 2 USRPs with 1 host PC

From: Dimitris Symeonidis
Subject: Re: [Discuss-gnuradio] using 2 USRPs with 1 host PC
Date: Thu, 16 Jul 2009 18:34:10 +0200

Most likely, the two usb ports are connected to the same usb host
controller, so they share the speed. You will therefore not be able to
see all the spectrum you could otherwise...

Regarding which=0 and which=1, it has to do with the order, with which
they're connected to the computer...

Dimitris Symeonidis
"If you think you're too small to make a difference, try sleeping with
a mosquito!" - Amnesty International

On Wed, Jul 15, 2009 at 13:19, Sheshanandan KN<address@hidden> wrote:
> hi all,
> I am presently using 1 host PC with 2 USRPs connected to 2 different
> USB ports. Please let me know where to change the option of which = 0
> and which = 1 ? By going for this implementation, what are the
> performance variations I can expect when compared to the case of 2
> USRPs on 2 different PCs?
> Thanks a lot for your help in advance.
> Shesh
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio

reply via email to

[Prev in Thread] Current Thread [Next in Thread]