[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Re Stereo FM on USRP board with Basic RX board do not
[Discuss-gnuradio] Re Stereo FM on USRP board with Basic RX board do not able to catch signal.
Sun, 25 Oct 2009 19:41:50 -0700
I tried simple FM receiver example in GNUradio (usrp_wfm_rcv.py) with USRP board, with Basic RX antenna.
I able to catch some station like 93.5 FM, but not getting clear sound, I heard noise too much.
Then I try to run stereo FM example made in GRC,
- to understand a process I put FFT after quadrature_demodulator, but I notice
1.I could not get good signal after quadrature demodulator itself
2. do not able to see any pilot signal around 19Khz, or L-R signal around 23 to 53 Khz. and L+R signal aroud 0 to 15Khz.
I do not able to hear any thing.
but at same FM station(93.5M) in mono case I can here atleast some sound.
I attached my GRC block diagram for your reference, please guide me, where I am wrong.
Thanks and Regards
Description: Binary data
|[Prev in Thread]
||[Next in Thread]|
- [Discuss-gnuradio] Re Stereo FM on USRP board with Basic RX board do not able to catch signal.,
Tushar Patel <=