[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] USRP2 noise floor peculiarities
From: |
Douglas Geiger |
Subject: |
Re: [Discuss-gnuradio] USRP2 noise floor peculiarities |
Date: |
Mon, 26 Oct 2009 16:48:05 -0400 |
I believe the filtering used does change with the decimation - per an
earlier posting by Matt Ettus: if the decimation is a factor of four
there are two half-band filters + CIC filter, if it is a multiple of
two (i.e. even, but not a factor of four) then there is only one
half-band filter + CIC, and if it is an odd number, just a CIC filter.
Doug
On Mon, Oct 26, 2009 at 4:20 PM, Jordan J Riggs <address@hidden> wrote:
> Folks,
>
> I have been trying to get a better understanding the noise characteristics
> of the USRP2/RFX2400 platform. To get an idea of the noise floor at various
> bandwidths, I connected the SMA's on the RFX2400 to a 50ohm load and
> averaged out the FFT at various bandwidths. Naturally, I would expect the
> floor to drop at lower bandwidths (higher decimation), but this is not
> always the case. For example, the floor at decim 100 is slightly lower than
> it is at 128. This is counterintuitive. The only explanation I can come up
> with is some filtering quirk in the FPGA. Does anyone have any ideas?
>
> I've attached screenshots at decim 100 and 128.
>
> Thanks,
> Jordan
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
--
Doug Geiger
address@hidden