[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] USRP2 firmware + cross compiled GNU Radio questio
Re: [Discuss-gnuradio] USRP2 firmware + cross compiled GNU Radio question
Thu, 03 Dec 2009 13:48:19 -0800
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:220.127.116.11pre) Gecko/20090922 Fedora/3.0-3.9.b4.fc12 Thunderbird/3.0b4
On 11/29/2009 04:52 AM, Tim Newman wrote:
Hi, I've been working on cross compiling the latest stable GNU Radio
release, 3.2.1, onto the TI Davinci DM6446 board using OpenEmbedded as
my build environment and Angstrom as my Linux Distro. I've managed to
cross compile and download gnuradio onto the board, though I'm going
with a console only Linux image so I don't have any of the gnuradio
python GUI stuff. Anyways, I am using a USRP2 and the board I'm using
doesn't have has 100T ethernet and not 1000T, so I'm using a
1000/100/10T DLink switch to do the translation.
First, maybe it was a mistype but the latest version of gnuradio is
3.2.2 not 3.2.1. Next, if you just want to test transmit, use
The USRP2 won't work unless you are using a GigE network card on the host.
Matt has put together a new ethernet MAC here:
I don't think this supports 10/100, maybe I'm wrong, but it may be worth
We still require Gigabit.
|[Prev in Thread]
||[Next in Thread]|
- Re: [Discuss-gnuradio] USRP2 firmware + cross compiled GNU Radio question,
Matt Ettus <=