RE: [Discuss-gnuradio] USRP2 Diagnostics in GRC

[Umair Naeem]

I am using GRC version 0.7. I installed from Add/Remove Programs. I have 
Gnuradio 3.2 as shown in Add/Remove Programs. How can i upgrade my GNU/GRC 
installation to work with USRP2?

Regards,
Umair Naeem
MSc Communication Engineering
Chalmers University ot Technology, Sweden.
________________________________________
From: address@hidden address@hidden on behalf of Josh Blum address@hidden
Sent: Wednesday, March 31, 2010 5:08 PM
To: address@hidden
Subject: Re: [Discuss-gnuradio] USRP2 Diagnostics in GRC

Wow, how did you find this ancient version of grc?

Anyway, here is the note from my website:

Please use the grc that is bundled with the current gnuradio master or
the gnuradio 3.2 release. It has a years worth of work and improvements
compared to the last versioned release of grc (0.70). In addition, the
grc bundled with gnuradio is guaranteed to evolve with gnuradio; whereas
the older non-bundled grc will stagnate and cease to be compatible with
newer gnuradio releases.

and wiki page

http://gnuradio.org/redmine/wiki/gnuradio/GNURadioCompanion

-Josh

On 03/31/2010 07:19 AM, Umair Naeem wrote:
> Hi,
>
> I have a problem concerning USRP2. I am using GRC to make flow graphs but I 
> can not find USRP2 when I use USRP source block. When I run a simple program 
> with only two blocks (USRP source and Scope Sink) I get  following error:
>
>>>> Verbose:
> usrp: failed to find usrp[0]
> Traceback (most recent call last):
>    File "/usr/share/grc/src/ExecFlowGraphGUI.py", line 231, in OnInit
>      self.SetTopWindow(FlowGraphFrame(self.flow_graph_file_path))#first 
> argument is the flow graph
>    File "/usr/share/grc/src/ExecFlowGraphGUI.py", line 159, in __init__
>      FlowGraphBuilder.__init__(self, file_path)
>    File "/usr/share/grc/src/ExecFlowGraph.py", line 50, in __init__
>      self._parse_nested_data(ParseXML.from_xml(ParseXML.from_file(file_path)))
>    File "/usr/share/grc/src/ExecFlowGraph.py", line 145, in _parse_nested_data
>      signal_blocks_dict[signal_block.get_id()] = 
> runnable_signal_block(*data_type_params)
>    File "/usr/share/grc/src/SignalBlockDefs/USRP.py", line 182, in make
>      u = type.parse()[0](number, nchan=1)
>    File "/usr/lib/python2.6/site-packages/gnuradio/usrp/usrp_swig.py", line 
> 1699, in source_c
>      return _usrp_swig.source_c(*args, **kwargs)
> RuntimeError: can't open usrp
>
>
> I also tried using USRP Diagnostics in Help menu but it also does nt detect.
> I run find_usrps through terminal and it works like,
> 00:50:c2:85:34:6f hw_rev = 0x0400
>
>
> Regards,
> Umair Naeem
> MSc Communication Engineering
> Chalmers University ot Technology, Sweden.
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
>
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio


_______________________________________________
Discuss-gnuradio mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio