Re: [Discuss-gnuradio] USRP2 Diagnostics in GRC

[Josh Blum]

From what I understand, GRC is bundled with the gnuradio 3.2 release. 
So you shouldnt need to install this "GRC version 0.7" package. Use the 
grc that comes bundled with gnuradio, anything else will have problems 
working.

If your package manager cannot give you what you need, I recommend just 
installing the gnuradio from source code 
http://gnuradio.org/redmine/wiki/gnuradio/BuildGuide

-Josh

On 04/01/2010 03:19 PM, Umair Naeem wrote:
> I am using GRC version 0.7. I installed from Add/Remove Programs. I have 
> Gnuradio 3.2 as shown in Add/Remove Programs. How can i upgrade my GNU/GRC 
> installation to work with USRP2?
>
> Regards,
> Umair Naeem
> MSc Communication Engineering
> Chalmers University ot Technology, Sweden.
> ________________________________________
> From: address@hidden address@hidden on behalf of Josh Blum address@hidden
> Sent: Wednesday, March 31, 2010 5:08 PM
> To: address@hidden
> Subject: Re: [Discuss-gnuradio] USRP2 Diagnostics in GRC
>
> Wow, how did you find this ancient version of grc?
>
> Anyway, here is the note from my website:
>
> Please use the grc that is bundled with the current gnuradio master or
> the gnuradio 3.2 release. It has a years worth of work and improvements
> compared to the last versioned release of grc (0.70). In addition, the
> grc bundled with gnuradio is guaranteed to evolve with gnuradio; whereas
> the older non-bundled grc will stagnate and cease to be compatible with
> newer gnuradio releases.
>
> and wiki page
>
> http://gnuradio.org/redmine/wiki/gnuradio/GNURadioCompanion
>
> -Josh
>
> On 03/31/2010 07:19 AM, Umair Naeem wrote:
> > Hi,
> >
> > I have a problem concerning USRP2. I am using GRC to make flow graphs but I can 
> > not find USRP2 when I use USRP source block. When I run a simple program with 
> > only two blocks (USRP source and Scope Sink) I get  following error:
> >
> > > > > Verbose:
> > usrp: failed to find usrp[0]
> > Traceback (most recent call last):
> >     File "/usr/share/grc/src/ExecFlowGraphGUI.py", line 231, in OnInit
> >       self.SetTopWindow(FlowGraphFrame(self.flow_graph_file_path))#first 
> > argument is the flow graph
> >     File "/usr/share/grc/src/ExecFlowGraphGUI.py", line 159, in __init__
> >       FlowGraphBuilder.__init__(self, file_path)
> >     File "/usr/share/grc/src/ExecFlowGraph.py", line 50, in __init__
> >       self._parse_nested_data(ParseXML.from_xml(ParseXML.from_file(file_path)))
> >     File "/usr/share/grc/src/ExecFlowGraph.py", line 145, in _parse_nested_data
> >       signal_blocks_dict[signal_block.get_id()] = 
> > runnable_signal_block(*data_type_params)
> >     File "/usr/share/grc/src/SignalBlockDefs/USRP.py", line 182, in make
> >       u = type.parse()[0](number, nchan=1)
> >     File "/usr/lib/python2.6/site-packages/gnuradio/usrp/usrp_swig.py", line 
> > 1699, in source_c
> >       return _usrp_swig.source_c(*args, **kwargs)
> > RuntimeError: can't open usrp
> >
> >
> > I also tried using USRP Diagnostics in Help menu but it also does nt detect.
> > I run find_usrps through terminal and it works like,
> > 00:50:c2:85:34:6f hw_rev = 0x0400
> >
> >
> > Regards,
> > Umair Naeem
> > MSc Communication Engineering
> > Chalmers University ot Technology, Sweden.
> >
> >
> > _______________________________________________
> > Discuss-gnuradio mailing list
> >
> > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio