Re: [Discuss-gnuradio] No UHD Devices Found

[Josh Blum]

Are the UHD images burned onto the sd card?

http://code.ettus.com/redmine/ettus/projects/public/wiki/U2binaries#UHD-Firmware-and-FPGA-Images

http://www.ettus.com/uhd_docs/manual/html/usrp2.html#load-the-images-onto-the-sd-card

Are lights E and F light up on the front panel once powered up?

-Josh

On 07/15/2010 09:28 AM, Luca Pascale wrote:
> Hi,
> I have received  two new USRP2 (rev 4) with a BasicRx DB. I connect the DB,
> set the gbit lan so that :
>
> eth1      Link encap:Ethernet  HWaddr 00:15:17:e6:86:56
>            inet addr:192.168.10.1  Bcast:192.168.10.255  Mask:255.255.255.0
>            inet6 addr: fe80::215:17ff:fee6:8656/64 Scope:Link
>            UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>            RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>            TX packets:190 errors:0 dropped:0 overruns:0 carrier:0
>            collisions:0 txqueuelen:1000
>            RX bytes:0 (0.0 B)  TX bytes:27244 (27.2 KB)
>            Memory:f3000000-f3020000
>
> I connect the USRP2 to the GBIT lan port and try:
> ping 192.168.10.2
>
> PING 192.168.10.2 (192.168.10.2) 56(84) bytes of data.
>  From 192.168.10.1 icmp_seq=2 Destination Host Unreachable
>  From 192.168.10.1 icmp_seq=3 Destination Host Unreachable
>  From 192.168.10.1 icmp_seq=4 Destination Host Unreachable
>
> am I missing something ?
>
> (I have also builded UHD and tried uhd_find_devices...result: No UHD Devices
> Found )
>
> Any suggestions ?? (same behaviours on both uspr2)
> thanks in advance Luca
>
>
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio