Re: [Discuss-gnuradio] No UHD Devices Found

[Matthias Wilhelm]

Hello, 

"destination host unreachable" indicates that the route is not set correctly. 
Try 

# route add -net 192.168.10.0/24 dev eth1

or check 

# route -n

to see if the routing is using the proper network devices. 

Matthias


Am 28.07.2010 um 11:10 schrieb Tobias Schmid:

> Hi,
> 
> I've got exactly the same problem.
> In my case the lights D and F are light up.
> 
> The usrp2_card_burner_gui.py works correctly. I've checked that by flashing 
> the cards with the common firmware.
> And that works fine.
> 
> Tobias
> 
> Am 15.07.2010 18:32, schrieb Josh Blum:
>> Are the UHD images burned onto the sd card?
>> 
>> http://code.ettus.com/redmine/ettus/projects/public/wiki/U2binaries#UHD-Firmware-and-FPGA-Images
>>  
>> 
>> http://www.ettus.com/uhd_docs/manual/html/usrp2.html#load-the-images-onto-the-sd-card
>>  
>> 
>> Are lights E and F light up on the front panel once powered up?
>> 
>> -Josh
>> 
>> On 07/15/2010 09:28 AM, Luca Pascale wrote:
>>> Hi,
>>> I have received  two new USRP2 (rev 4) with a BasicRx DB. I connect the DB,
>>> set the gbit lan so that :
>>> 
>>> eth1      Link encap:Ethernet  HWaddr 00:15:17:e6:86:56
>>>           inet addr:192.168.10.1  Bcast:192.168.10.255  Mask:255.255.255.0
>>>           inet6 addr: fe80::215:17ff:fee6:8656/64 Scope:Link
>>>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>>>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>>>           TX packets:190 errors:0 dropped:0 overruns:0 carrier:0
>>>           collisions:0 txqueuelen:1000
>>>           RX bytes:0 (0.0 B)  TX bytes:27244 (27.2 KB)
>>>           Memory:f3000000-f3020000
>>> 
>>> I connect the USRP2 to the GBIT lan port and try:
>>> ping 192.168.10.2
>>> 
>>> PING 192.168.10.2 (192.168.10.2) 56(84) bytes of data.
>>> From 192.168.10.1 icmp_seq=2 Destination Host Unreachable
>>> From 192.168.10.1 icmp_seq=3 Destination Host Unreachable
>>> From 192.168.10.1 icmp_seq=4 Destination Host Unreachable
>>> 
>>> am I missing something ?
>>> 
>>> (I have also builded UHD and tried uhd_find_devices...result: No UHD Devices
>>> Found )
>>> 
>>> Any suggestions ?? (same behaviours on both uspr2)
>>> thanks in advance Luca
>>> 
>>> 
>>> 
>>> 
>>> _______________________________________________
>>> Discuss-gnuradio mailing list
>>> address@hidden
>>> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>> 
>> _______________________________________________
>> Discuss-gnuradio mailing list
>> address@hidden
>> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>> 
> 
> 
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio