[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] some problems about usrp motherboard that i make
From: |
tonygc |
Subject: |
Re: [Discuss-gnuradio] some problems about usrp motherboard that i make by myself |
Date: |
Mon, 2 Aug 2010 21:15:54 -0700 (PDT) |
1 run usrp_benchmark_usb, displays:
Testing 2MB/sec... uUuUuUuUuUuUuUuUuUuUuUuUuUuUuUuUuUuU
then, nothing goes on.
2 run "usrper load_standard_bits", after seconds, it's finished. no error.
running all "usrper ..." orders are ok, no error.
3 cyclone is the same as that of USRP.
thank you for your guide.
Eric Blossom wrote:
>
> On Fri, Jul 30, 2010 at 12:04:13AM -0700, tonygc wrote:
>>
>> thank you for your reply, Eric. we tested the motherboard, source code
>> can be
>> loaded into FX2, and usrper can be used to configure something. that
>> means
>> FX2 works well. we use usrp_benchmark_usb to test the board, it doen't
>> work.
>
> What do you mean by "doesn't work"? That's very vague.
>
>> something wrong with FPGA. but the clock of FPGA and ADCs are all OK, and
>> FX2 to FPGA connections are also ok. it seems rbf cann't load to FPGA,
>> why?
>> can you give me some guide? thank you again.
>
> How do you know that the rbf isn't loaded?
>
> Does
>
> $ usrper load_standard_bits
>
> give you some kind of error?
>
> If you're using a different model of Cyclone, the precompiled rbf
> won't work for you. You'll need to build one that's appropriate for
> your device.
>
> Take a look at the Cyclone datasheet and read up on how it's loaded.
> With a logic analyzer, you should be able to watch all the relevant
> signals between the FX2 and Cyclone. It's been a long time since I
> looked at that datasheet or code, but there's some combination of
> signals that indicates "start loading", "loading completed
> successfully" and "loading failed".
>
> Eric
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
--
View this message in context:
http://old.nabble.com/some-problems-about-usrp-motherboard-that-i-make-by-myself-tp29225435p29331806.html
Sent from the GnuRadio mailing list archive at Nabble.com.