[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Using the USRP1 for GOES LRIT reception...
From: |
Thomas Tsou |
Subject: |
Re: [Discuss-gnuradio] Using the USRP1 for GOES LRIT reception... |
Date: |
Sun, 5 Sep 2010 15:12:26 -0400 |
On Sun, Sep 5, 2010 at 1:03 PM, Michael Kimzey <address@hidden> wrote:
>
> Hello all.
> I'm a bit of a noobie and getting my feet wet here. I hope to use my
> recently received USRP1 to receive the GOES weather satellite LRIT data using
> software from their site. (here: http://www.goes-r.gov/hrit_emwin/index.html
> )
> First, I was wondering if there was anyone else out there interested in/doing
> the same.
> Second, I loaded up the software and followed the included directions
> (setting environment variables, etc) but it seems that the firmware wouldn't
> load up. (the USRP1 is installed and recognized by windows, though)
> Here is the output:
>
> --------------------------------------------------C:\Program Files\HRIT
> Radio>emwinr
> ==========================
> Tracking LIVE SATELLITE
> Using ETTUS BOX
> ===========================
>
> The current date is 09/05/10
> The current time is 12:14:00
> Clock.Frequency: 64.0 MHz
> ======================
> ACQ-Engine ENABLED
> ======================
> Can't find firmware: std_Aerospace.ihx
> PATH= C:\Program Files\HRIT Radio
>
> This application has requested the Runtime to terminate it in an unusual way.
> Please contact the application's support team for more information.
>
> C:\Program Files\HRIT Radio>
> ---------------------------------------------------As an FYI, the required
> firmware (std_Aerospace.ihx) is in this directory and has the exact same
> spelling.
> So, if anyone can offer some insight that would be cool. I'll also be asking
> the developers and update this list if I hear anything.
I took a peek at the receiver code. Since it reuses the USRP code from
GNURadio the following should apply. Assuming that you have the
USRP_PATH environment variable set, the firmware file should be in
USRP_PATH\rev4\ and not in the base directory specified by the
variable.
Tom