[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] LFTX/LFRX frequency range
From: |
adib_sairi |
Subject: |
Re: [Discuss-gnuradio] LFTX/LFRX frequency range |
Date: |
Sat, 9 Oct 2010 18:13:45 -0700 (PDT) |
Matt Ettus wrote:
>
> Christian Schroeder wrote:
>> Hi together,
>>
>> we want to use the USRP2 with LFTX/LFRX boards to make transmissions
>> in a low frequency regime from below 1 kHz up to about roughly 50 kHz.
>> The daughterboard specifications give a frequency range from DC to 30
>> MHz.
>>
>> We are now wondering, if we will experience some degradations since we
>> want to work near the specification limits.
>> Does anybody know about the frequency response at these frequencies?
>> Is there something like a lower bound given by the hardware for
>> reasonable working frequencies?
>>
>
> There should be no problem going all the way down to DC.
>
> Matt
>
>
Dear all,
can the benchmark_xx.py used to transmit on this low frequency using the
lrtx d.board?is there any limitation that i have to aware? thanks
adib
-----
Mohd Adib Sarijari
Universiti Teknologi Malaysia
www.fke.utm.my
www.utm.my
--
View this message in context:
http://old.nabble.com/LFTX-LFRX-frequency-range-tp19915036p29925355.html
Sent from the GnuRadio mailing list archive at Nabble.com.
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Discuss-gnuradio] LFTX/LFRX frequency range,
adib_sairi <=