Re: [Discuss-gnuradio] UDP driver

[Marcus D. Leech]

On 10/20/2010 03:57 PM, Jorge Miguel wrote:
> Hello,
>
> I burned in my SD card the UDP FPGA image and the FIRMWARE of basic tx
> and rx for UDP
>
> http://code.ettus.com/redmine/ettus/attachments/74
> http://ettus.com/u2bin/txrx_udp_20100507.bin
>
> After powering the USRP2, only the two leds of Image and FPGA and on,
> which is fine.
>
> My feeling was that I can be able to ping the USRP to 192.168.10.2
> being my host computer 192.168.10.1
> I cannot see the USRP. In fact running a sniffer I see nothing from
> the USRP. (Neither in Windows nor Ubuntu)
>
> I made sure that there is no firewall blocking the UDP traffic.
>
> What can be wrong?
> Many thanks,
> Jorge.
>
>   
The "UDP Beta" firmware does *not* have a complete IP stack, and doesn't
reply to ICMP ECHO (ping) traffic.

If you are heading down the UHD road (which you should be), then you'll
need the latest UHD Firmware/FPGA images:

http://www.ettus.com/downloads/uhd_images/




-- 
Marcus Leech
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org